A feasibility study of X‐ray phase‐contrast mammographic tomography at the Imaging and Medical beamline of the Australian Synchrotron

Results are presented of a recent experiment at the Imaging and Medical beamline of the Australian Synchrotron intended to contribute to the implementation of low‐dose high‐sensitivity three‐dimensional mammographic phase‐contrast imaging, initially at synchrotrons and subsequently in hospitals and medical imaging clinics. The effect of such imaging parameters as X‐ray energy, source size, detector resolution, sample‐to‐detector distance, scanning and data processing strategies in the case of propagation‐based phase‐contrast computed tomography (CT) have been tested, quantified, evaluated and optimized using a plastic phantom simulating relevant breast‐tissue characteristics. Analysis of the data collected using a Hamamatsu CMOS Flat Panel Sensor, with a pixel size of 100 µm, revealed the presence of propagation‐based phase contrast and demonstrated significant improvement of the quality of phase‐contrast CT imaging compared with conventional (absorption‐based) CT, at medically acceptable radiation doses.     

Thermal study on electrospun polyvinylpyrrolidone/ammonium metatungstate nanofibers: optimising the annealing conditions for obtaining WO<Subscript>3</Subscript> nanofibers

This article demonstrates how important it is to find the optimal heating conditions when electrospun organic/inorganic composite fibers are annealed to get ceramic nanofibers in appropriate quality (crystal structure, composition, and morphology) and to avoid their disintegration. Polyvinylpyrrolidone [PVP, (C₆H₉NO) _n ] and ammonium metatungstate [AMT, (NH₄)₆[H₂W₁₂O₄₀]·nH₂O] nanofibers were prepared by electrospinning aqueous solutions of PVP and AMT. The as-spun fibers and their annealing were characterized by TG/DTA-MS, XRD, SEM, Raman, and FTIR measurements. The 400–600 nm thick and tens of micrometer long PVP/AMT fibers decomposed thermally in air in four steps, and pure monoclinic WO₃ nanofibers formed between 500 and 600 °C. When a too high heating rate and heating temperature (10 °C min⁻¹, 600 °C) were used, the WO₃ nanofibers completely disintegrated. At lower heating rate but too high temperature (1 °C min⁻¹, 600 °C), the fibers broke into rods. If the heating rate was adequate, but the annealing temperature was too low (1 °C min⁻¹, 500 °C), the nanofiber morphology was excellent, but the sample was less crystalline. When the optimal heating rate and temperature (1 °C min⁻¹, 550 °C) were applied, WO₃ nanofibers with excellent morphology (250 nm thick and tens of micrometer long nanofibers, which consisted of 20–80 nm particles) and crystallinity (monoclinic WO₃) were obtained. The FTIR and Raman measurements confirmed that with these heating parameters the organic matter was effectively removed from the nanofibers and monoclinic WO₃ was present in a highly crystalline and ordered form.     

Poly(allylamine hydrochloride) Functionalized Multiwalled Carbon Nanotube Modified Carbon Paste Electrode as Acetylcholinesterase Biosensor Transducer

In this work, a sensitive, practical and reliable acetylthiocholine (ATCh) biosensor based on poly(allylamine hydrochloride) functionalized multiwalled carbon nanotube (PAH/MWCNT) was fabricated and used for pesticide detection. As far as we know, this is the first work that constitutes the usage of PAH and MWCNT for ATCh biosensor. The developed system was characterized by using scanning electron microscopy, electrochemical impedance spectroscopy and cyclic voltammetry. The influence of parameters such as enzyme amount and pH were examined and a linearity between 5×10^?5 M?2.0×10^?3 M for ATCh was obtained. The proposed biosensor was applied for a model pesticide, monocrotophos, detection. The analytical curve showed an excellent linearity in the monocrotophos concentration range of 1–25 pg/mL with an incubation time of 5 min. Limit of detection and limit of quantification values were calculated as 0.88 and 2.9 pg/mL, respectively. The system was also applied for detection of monocrotophos in grape, tomatoe, tap and mineralized water samples and promising recovery values were obtained.     

Structure–reactivity relationship in Diels–Alder reactions obtained using the condensed reaction graph approach

By the structural representation of a chemical reaction in the form of a condensed graph a model allowing the prediction of rate constants (logk) of Diels–Alder reactions performed in different solvents and at different temperatures is constructed for the first time. The model demonstrates good agreement between the predicted and experimental logk values: the mean squared error is less than 0.75 log units. Erroneous predictions correspond to reactions in which reagents contain rarely occurring structural fragments. The model is available for users at https://cimm.kpfu.ru/predictor/.