Approximate solutions in set-valued optimization problems with applications to maximal monotone operators

Positivity - This paper is devoted to the study of efficient elements for set-valued maps. We propose two new notions of relative weak $$\epsilon $$ -efficient element and strict relative weak...     

Synthesis and characterization of PEGylated iron and graphene oxide magnetic composite for curcumin delivery

Nowadays, nanostructures have been given significant attention in medical and biological fields. Among these nanostructures, graphene oxide (GO) has been widely used in drug delivery systems, because of its unique properties, and the ability to connect to other nanostructures such as magnetic nanoparticles (NPs) as well as polymers by its functional groups. In this research, first, GO was prepared by exfoliating graphite according to the modified Hummer’s method, and then the Fe₃O₄ NPs were synthesized by a simple co-precipitation method on GO nanosheets. In the next step, with the help of the ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reagents, the polyethylene glycol (PEG) polymer was bonded to the GO-Fe₃O₄ nanocomposite. Finally, anti-cancer drug, curcumin (Cur) was loaded onto the nanocomposite and the Cur loading ratio was measured at about 8%. The samples were evaluated using Fourier transform-infrared, differential scanning calorimtery, vibrating-sample magnetometry, atomic force microscopy and dynamic light scattering techniques. The results show that the prepared nanocomposite is an appropriate candidate for biomedical applications.     

CuI-catalyzed tandem synthesis of thioethers using aryl halides,electron-deficient alkenes,and sodium iso-propyl xanthogenate

A ligand-free, CuI-catalyzed protocol was developed for the one-step preparation of Michael adducts of aromatic thiols in high yields by reacting a mixture of an aryl halide and an electron-deficient alkene with sodium iso-propyl xanthogenate.     

Synthesis,Characterization, Structural Description,Micellization Behavior,DNA Binding Study and Antioxidant Activity of 4, 5 and 6-Coordinated Copper(II) and Zinc(II) Complexes

Four mononuclear copper(II) and zinc(II) complexes were synthesized by the reaction of copper and zinc salts with 3,4-dichlorophenylactic acid, 2-bromophenylactic acid, biphenylacetic acid (O-donor ligand) and bipyridine (N-donor ligands) having the general formulae [(L)₂Cu(bp)(H₂O)] ( 1 ), [(BpA)₂Cu(bp)] ( 2 ), [(L)₂Zn(bp)(H₂O)] ( 3 ) and [(L*)₂Zn(bp)] ( 4 ) (L = 3,4-dichlorophenylacetate, L* = 2-bromophenylacetate bp = bipyridine, and BpA = biphenylacetate). Structures of all compounds were characterized through FT-IR spectroscopy and X-ray diffraction analysis. FT-IR spectra of all complexes confirmed the binding mode of Cu-O and Zn-O. XRD data revealed that complexes 1 – 3 exhibited distorted octahedral arrangement, whereas complex 4 has a distorted tetrahedral environment. Micellization behavior was examined with anionic surfactant (SDS) by conductance measurement as well as absorption spectral analysis. DNA binding study was assessed through viscosity measurement and UV/Vis spectrophotometry. DPPH free radical scavenging assay was measured by UV/Vis spectrophotometry. The results showed nice biological potential of all the complexes.     

Synthesis and characterization of novel ferrocenyl glycidyl ether polymer,ferrocenyl poly (epichlorohydrin) and ferrocenyl poly (glycidyl azide)

Poly (ferrocenyl glycidyl ether) was synthesized by polymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane (FcEpo) using toluene solution of methylaluminoxane as the catalyst. Copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin was used for the synthesis of another ferrocenyl based poly (epichlorohydrin). Ferrocenyl based poly (glycidyl azide), GAP, was synthesized by treatment of sodium azide with this copolymer in DMF as solvent at room temperature. The synthesized ferrocenyl based polymers were characterized by FT-IR, ¹HNMR, UV–Vis, TGA, DSC and GPC analysis. The UV–Vis spectra of synthesized polymers show the absorption band of ferrocene moiety at about 450 nm. The TGA and DSC analysis show that poly (ferrocenyl glycidyl ether) has good thermal stability. The TGA analysis shows that the copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin improved the thermal stability of the copolymer. The GPC analysis of poly (ferrocenyl glycidyl ether), ferrocenyl based poly (epichlorohydrin) and Ferrocenyl based poly (glycidyl azide) show the PDI between 1.14–1.17. The electrochemical behavior of synthesized polymers was investigated by cyclic voltammetry (CV) measurements. The CV curves of synthesized polymers show good electrochemical performance and there is one redox system with the single-electron reversible reaction that associated with ferrocene moiety in polymers structure. The anodic and cathodic peak currents increased with scan rate confirmed redox reactions in the system are kinetically fast diffusion-controlled reactions.     

Application of titanium nanoparticles containing natural compounds in cutaneous wound healing

The aim of the study was the rapid green synthesis of titanium nanoparticles using the aqueous extract of Falcaria vulgaris leaves (TiNPs@FV) and exploring their antioxidant, cytotoxicity, antifungal, antibacterial, and cutaneous wound healing activities under in vitro and in vivo condition. These nanoparticles were characterized by UV-Vis, Fourier transform-infrared(FT-IR), X-ray diffraction XRD), field emission-scanning electron microscopy FE-SEM), and transmission electron microscopy TEM) analyses. The synthesized TiNPs@FV had great cell viability on human umbilical vein endothelial cells and indicted this method was nontoxic. DPPH (2,2-diphenyl-1-picrylhydrazyl) test revealed similar antioxidant potentials for F. vulgaris, TiNPs@FV, and butylated hydroxytoluene. All data of antibacterial, antifungal, and cutaneous wound healing tests were analyzed by SPSS 22 software. In the antimicrobial part of this study, TiNPs@FV indicated higher antifungal and antibacterial effects than all standard antibiotics (p ≤ 0.01). Minimal inhibitory concentration (MIC) and minimal fungicidal concentration of TiNPs@FV against all fungi were at 2–4 mg/mL and 2-8 mg/mL ranges, respectively. But, MIC and minimal bactericidal concentration of TiNPs@FV against all bacteria were at 2-8 mg/mL and 2-16 mg/mL ranges, respectively. In the part of cutaneous wound healing, use of TiNPs@FV ointment significantly (p ≤ 0.01) raised the wound contracture, vessel, hydroxyl proline, hexuronic acid, hexosamine, fibrocyte, and fibrocytes/fibroblast rate and significantly (p ≤ 0.01) decreased the wound area, total cells, neutrophil, and lymphocyte compared to other groups in rats. The results of FT-IR, UV-Vis, XRD, TEM, and FE-SEM confirm that the aqueous extract of F. vulgaris leaves can be used to yield titanium nanoparticles with a notable amount of remedial effects.     

Highly efficient synthesis of dicoumarols and xanthene derivatives in presence of Brønsted–Lewis acidic ionic liquids catalyst

A series of metal chloride-based acidic ionic liquids have been prepared and used as an efficient catalyst in one-pot multicomponent synthesis of biscoumarins and substituted xanthenes derivatives under solvent-free conditions. Among the acidic ionic liquids, N-methylpyrrolidonium zinc chloride (Hnmp/ZnCl₃)-based Brønsted–Lewis acidic ionic liquids were found to be an effective and recyclable catalyst for a one-pot synthesis of biscoumarins through the domino Knoevenagel–Michael reaction of a variety of aldehydes with 4-hydroxycoumarin in short reaction times. The reactions which occur under relatively mild conditions afforded the biscoumarin derivatives employing a very low loading of catalyst in satisfactory isolated yields and high purity after simple work-up. The Brønsted–Lewis acidic ionic liquid catalyst was reused four times without any variation in yield.     

3D Printable Geopolymer Composites Reinforced with Carbon-Based Nanomaterials – A Review

Three-dimensional (3D) geopolymer printing (3DGP) technology is a rapidly evolving digital fabrication method used in the construction industry. This technology offers significant benefits over 3D concrete printing in terms of energy saving and reduced carbon emissions, thus promoting sustainability. 3DGP technology is still evolving, and researchers are striving to develop high-performance printable materials and different methods to improve its robustness and efficiency. Carbon-based nanomaterials (CBNs) with beneficial properties have a wide range of applications in various fields, including as concrete/geopolymer systems in construction. This paper comprehensively reviews the research progress on carbon-based nanomaterials (CBNs) used to develop extrusion-based 3D geopolymer printing (3DGP) technology, including dispersion techniques, mixing methods, and the materials′ performance. The rheological, mechanical, durability, and other characteristics of these materials are also examined. Furthermore, the existing research limitations and the prospects of using 3DGP technology to produce high-quality composite mixtures are critically evaluated.     

Generation of Haploid Spermatids on Silk Fibroin-Alginate-Laminin-Based Porous 3D Scaffolds

In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.