Pyridine-Stabilized Cationic Silanethione Tungsten Complexes: Synthesis,Structures, and Reactivity

Silanethione compounds, R₂Si=S, have been recognized as highly reactive species. One reliable way to stabilize silanethione is its coordination to transition metal fragments to convert silanethione-coordinated transition metal complexes. Herein, we report the synthesis, structure, and reactivity of a second cationic silanethione tungsten complex [Cp*(OC)₃W{S=SiR₂(py)}]TFPB (R=Me ( 5 a ), Ph ( 5 b ), Cp*: η⁵-C₅Me₅, py: pyridine, and TFPB⁻: [B{3,5-(CF₃)₂C₆H₃}₄]⁻). Complex 5 was obtained by H⁻ abstraction from the Si atom in the corresponding silylsulfanyl complex Cp*(OC)₃W(SSiR₂H) ( 4 ) with Ph₃CTFPB, followed by the addition of pyridine. The reaction of 5 with PhNCS and PMe₃ produced [Cp*(OC)₃W{SSiR₂N(Ph)C(PMe₃)₂}]TFPB (R=Me ( 6 a ), Ph ( 6 b )) via the elimination of pyridine and the addition of the 1,3-dipolar species PhNC(PMe₃)₂ ( A ) to the Si atom.     

Phosphorescent Ruthenium Complexes with a Nitroimidazole Unit that Image Oxygen Fluctuation in Tumor Tissue

Understanding oxygen fluctuation in a cancerous tumor is important for effective treatment, especially during radiotherapy. In this paper, ruthenium complexes bearing a nitroimidazole group are shown to report the oxygen status in tumor tissue directly. The nitroimidazole group was known to be accumulated in hypoxic tumor tissues. On the other hand, the ruthenium complex showed strong phosphorescence around 600 nm. The emission of ruthenium is quenched instantaneously by molecular oxygen due to energy transfer between triplet states of oxygen and ruthenium complex, but the emission is then recovered by the removal of oxygen. Thus, we could observe oxygen fluctuation in tumor tissue in a real‐time manner by monitoring the phosphorescence of the ruthenium complex. The versatility of the probe is demonstrated by monitoring oxygen fluctuation in living cells and tumor tissue planted in mice. The ruthenium complex promptly penetrated plasma membrane and accumulated in cells to emit its oxygen‐dependent phosphorescence. In vivo experiments revealed that the oxygen level in tumor tissue seems to fluctuate at the sub‐minute timescale.     

Vinyl Polymerization. 274. Polymerization of Acrylonitrile Initiated by the System Tetramethyl Tetrazene and Co(II) Chloride

Abstract

The binary system of tetramethyl tetrazene (TMT) and Co(II) chloride was used as initiator of acrylonitrile (AN) in dimethylformamide. The initial rate of polymerization (Rp) was found to be expressed by Rp = k[TMT]^0.62[Co(II) chloride]^0.57 [AN]^2.00

The polymerization was confirmed to proceed via a radical mechanism. The over-all activation energy for the polymerization was estimated as 15.1 kcal/mole. On the basis of these results and the product analysis of the reaction between the catalyst components in the absence of monomer, the initiation mechanism of the polymerization is discussed.     

Vinyl Polymerization. 418. Polymerization of Vinyl Monomer Initiated by Betaine-Type Polymers in Aqueous Solution

Abstract

Three kinds of betaine-type polymers, which are macromolecular amphoteric electrolytes, were found to be able to polymerize vinyl monomers in aqueous solution through a radical mechanism without any further initiator. Betain-type polymers form hydrophobic areas (HA) in water. Vinyl polymerization commenced in the HA. The effect of the pH of the aqueous solution on polymerization was investigated.     

Liquid crystalline polyurethane. Polyurethanes containing bis-(p-oxymethylphenyl) terephthalate

Several polyurethanes based on bis-(p-oxymethylphenyl) terephthalate (BOPT) were synthesized and studied with respect to some of their thermal properties. BOPT exhibits a mesomorphic phase at 252–264°C. Polymerization was carried out by equimolar reaction with hexamethyl-ene diisocyanate (HDI), 4,4-dicyclohexylmethane diisocyanate (H₁₂MDI) α,α'-diisocyanate-1,3-dimethylcyclohexane (H6 XDI), 4,4′-diphenylmeth-ane diisocyanate (MDI), 2,4-tolylene diisocyanate (TDI), and phenylene diisocyanate (PDI). It became clear that polyurethanes obtained from BOPT with HDI, H₁₂MDI, H₆XDI, and TDI have mesomorphic phases at 243–291, 214–250, 172–229, and 180–234°C, respectively, as determined by DSC and polarized microscopy, and that all polyurethanes are crystalline as evidenced by x-ray diffraction.     

Vinyl Polymerization. 269. Polymerization of Methyl Methacrylate Initiated by p,p'-Dimethoxydiphenyldiazomethane

Using p,p'-dimethoxydiphenyldiazomethane (DMDM) as initiator, the polymerization of methyl methacrylate (MMA) in benzene or in bulk was carried out. The initial rate of polymerization, R_p, was found to be expressed by the following equation:

R_p = k[DMDM]^0.53 [MMA]^0.84

The polymerization was confirmed to proceed by a radical mechanism. The over-all activation energy for the polymerization in benzene was calculated as 19.3 kcal/mole. The rate of thermal decomposition of DMDM was also measured in benzene and the rate equation was obtained as follows:

k_d (sec^?1) = 1.0 × 10¹⁵ exp (^?29.1 kcal/RT) (for 50-80°C)

Explanations of these observations are discussed in connection with those of the preceding papers.     

Polymerization of Acrylamide in Aqueous Solution of Poly(N‐isopropylacrylamide) at Lower Critical Solution Temperature

Acrylamide (AAm) was found to polymerize in a solution of poly(N‐isopropylacrylamide) (PNIPAAm) in water at around its lower critical solution temperature (LCST) (32°C) without any initiators. This phenomenon was specifically observed in aqueous solutions of the polymers having LCST such as PNIPAAm and poly(methylvinylether) (PMVE). AAm polymerized only when PNIPAAm and AAm were dissolved in water below LCST of PNIPAAm and then the solution was warmed up to the polymerization temperature (40°C). On the other hand, the polymerization of AAm did not proceed when AAm was added into aqueous PNIPAAm solution during and after the phase separation above 32°C. Furthermore the polymerizability of AAm was remarkably affected by the concentration and molecular weight of the PNIPAAm additives. Under the condition of lower PNIPAAm concentration (0.30 mol/L), the increase in the molecular weight of PNIPAAm considerably increased the molecular weight of the resulting PAAm but decreased the yield of PAAm. Under the condition of higher PNIPAAm concentration (0.60 mol/L) the polymerizability was not so affected by the molecular weight of PNIPAAm, while the molecular weight of PAAm formed by using higher molecular weight PNIPAAm was higher than those of PAAm formed by using lower molecular weight PNIPAAm. Moreover, the molecular weight of PAAm formed by the PNIPAAm induced polymerization of AAm was much higher than that of the polymer obtained by the radical polymerization using AIBN in THF or VA‐ 061 in water.     

The Supposition for the Kochen and Specker Theorem Using Sum rule and Product rule

We investigate a hidden-variable theory introduced by Kochen and Specker. The “hidden” results of measurements are either 1 or − 1. We suppose the validity of Sum rule and Product rule. Kochen and Specker suppose the two operations Sum rule and Product rule commute with each other. It is shown that the two operations Sum rule and Product rule do not commute with each other when we want to avoid the Kochen and Specker paradox. Otherwise we encounter the Kochen and Specker paradox. We mention the supposition for Greenberger, Horne, and Zeilinger paradox. It is discussed that only Product rule is necessary for the paradox. We give up the two paradoxes if (1) Sum rule and Product rule do not commute with each other and (2) Product rule is not valid.

     

Aerobic Toluene Oxidation Catalyzed by Subnano Metal Particles

Subnanocatalysts (SNCs) containing various noble metals (Cu, Ru, Rh, Pd, or Pt) with sizes of approximately 1 nm were synthesized using dendritic poly(phenylazomethine)s as a macromolecular template. These materials exhibit high catalytic performance during toluene oxidation without the use of harmful solvents or explosive oxidants, resulting in the formation of valuable organic products, including benzoic acid as the major product. In particular, Pt₁₉ SNC with a narrow particle size distribution exhibits extraordinary catalytic activity, with a turnover frequency of 3238 atom^?1 h^?1, which is 1700 times greater than that obtained by commercial Pt/C catalysts.