Effect of polyethylene glycol on corrosion of fresh macroporous silicon in 1.0 M NaOH and application in determination of porosity and thickness by gravimetric measurement

Abstract

This work presents on improvement in gravimetric measurement for determining the porosity and thickness of microporous silicon. Herein, the corrosion of fresh macroporous silicon (f-MPSi) in 1.0?M NaOH with different concentrations of polyethylene glycol (PEG 200/400/600) was studied by weight loss measurement and scanning electron microscopy (SEM). The results showed that the corrosion rate decreased with increasing polyethylene glycol concentration, and increased with an increase in temperature. Polyethylene glycol can inhibit the corrosion of f-MPSi in NaOH solution. Moreover, 1.0?M NaOH/PEG 600 (10%) can be used as the optimized solution to remove f-MPSi for measuring its porosity and thickness by gravimetric measurement.     

基于粒子滤波的运动目标光电定位仿真研究

运动目标的光电定位不能像静止目标那样简单做均值滤波，鉴于此，引入粒子滤波算法，它不仅可以应用于线性系统，而且还适用于非线性系统。结合光电定位需求，详细推导了计算公式及初值和参数选取公式，对只含测量噪声以及含有测量和运动噪声等的海面运动目标光电无源定位算法进行了仿真计算，验证了算法的有效性，讨论了噪声强度对滤波效果的影响，滤波参数选择对滤波效果的影响，目标运动方式对滤波跟随性的影响，重采样算法对滤波效果的影响等。所得结论为:粒子滤波可用于运动目标光电定位过程，可有效降低定位误差；粒子滤波算法具有较强鲁棒性，适用于噪声较大、目标运动形态变化大等情况。     

载机平台光电转塔目标定位的仿真算法

目标定位是光电转塔典型功能和任务之一，对其定位精度的考量也是转塔作战技术指标之一，针对该问题，从理论和仿真角度进行了分析。分析目标定位中用到的坐标系及其相互转换关系，给出光电转塔视轴反演、有源目标定位、无源目标定位的算法流程，通过仿真实验加以验证，考虑了定位过程中可能的随机误差来源，并分析是否采用均值滤波及其对定位结果的影响，最后通过Monte-Carlo分析计算了定位精度。分析结果表明:1）有源定位比无源定位的精度高，在仿真假设条件下，精度约提高1倍；2）均值滤波后，定位精度有较大提升（约提高15倍）；3）18 km距离时典型无源定位精度在80%置信度条件下约为39.4 m；4）统计直方图反映出80%置信度CEP半径及最大误差距离随载机位置、姿态、转塔视轴等（体现在目标载机距离上）不同参数的变化结果。     

Detection of synergistic effect of superoxide dismutase and jujubosides on scavenging superoxide anion radical by capillary electrophoresis

A new capillary electrophoresis method was developed to study the synergistic effect of superoxide dismutase and jujuboside A or B on scavenging superoxide anion radical in serum matrix respectively, in which superoxide anion radical was generated from pyrogallol autoxidation. The electrophoresis conditions, and the factors affecting the productive rate of purpurogallin, such as pyrogallol autoxidation product and the activity of superoxide dismutase, were optimized. Under optimal conditions, the content of superoxide dismutase in Gibco newborn calf serum was 7.06 mg/L, RSD was 2.01% and the average recovery was 98.4%. The values of IC₅₀ for jujuboside A and B in the serum matrix were 157.67 and 31.60 mg/L respectively, and they both had synergy on scavenging superoxide anion radical with superoxide dismutase, but there was no the dose‐dependency on this synergy.     

O-Alkyldithiophosphate Nickel Complexes with dcpf Ligand as Efficient Electrocatalysts for Hydrogen Evolution

Six new O-alkyldithiophosphate nickel complexes with dcpf ligand, [(dcpf)Ni(S₂P{O}OR)] (dcpf = 1,1′-bis (dicyclohexylphosphino)ferrocene, R = CH₃ ( 1 ), CH₃CH₂ ( 2 ), Ph ( 3 ), 4-MeC₆H₄ ( 4 ), PhCH₂ ( 5 ) and PhCH₂CH₂ ( 6 )), have been synthesized by the treatment of dcpf with ((RO)₂PS₂)₂Ni in satisfactory yields. These complexes were characterized by elemental analysis, spectroscopy (FTIR, UV–vis, ¹H, ¹³C, and ³¹P NMR), thermogravimetric analysis and single crystal X-ray diffraction. The nickel atom in 1 , 2 ·CH₂Cl₂, 3 ·CH₂Cl₂, 4 ·2CH₂Cl₂·THF, and 2( 5 )·hexane adopts a slightly distorted square-planar coordination environment finished by two phosphorus atoms of dcpf ligand and two sulfur atoms of O-alkyldithiophosphate ligand. Furthermore, the electrochemical properties for complexes 1 – 6 were also investigated by cyclic voltammetry. With the addition of 120 mM trifluoroacetic acid (TFA), the turnover frequency (TOF) values for 1 – 6 are estimated to be 1243.83, 1046.54, 1331.71, 2545.29, 1899.03, and 1191.37 s⁻¹, with the overpotential (η) values of 0.62, 0.58, 0.71, 0.67, 0.60, and 0.56 V, respectively. The result of electrochemical studies indicates that all complexes can be used as efficient molecular eletrocatalysts for the reduction of protons to hydrogen in the presence of TFA in MeCN.     

Interfacial Engineering FeOOH/CoO Nanoneedle Array for Efficient Overall Water Splitting Driven by Solar Energy

Interface engineering has been applied as an effective strategy to boost the electrocatalytic performance because of the strong coupling and synergistic effects between individual components. Here, we engineered vertically aligned FeOOH/CoO nanoneedle array with a synergistic interface between FeOOH and CoO on Ni foam (NF) by a simple impregnation method. The synthesized FeOOH/CoO exhibits outstanding electrocatalytic activity and stability for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. For the overall water splitting, the bifunctional FeOOH/CoO nanoneedle catalyst requires only a cell voltage of 1.58 V to achieve a current density of 10 mA cm⁻², which is much lower than that required for IrO₂//Pt/C (1.68 V). The FeOOH/CoO catalyst has been successfully applied for solar cell-driven water electrolysis, revealing its great potential for commercial hydrogen production and solar energy storage.     

Regulating Oxygen Configuration in Hierarchically Porous Carbon Nanosheets for High-Rate and Durable Na+ Storage

Surface oxygen functionalities (particularly C−O configuration) in carbon materials have negative influence on their electrical conductivity and Na⁺ storage performance. Herein, we propose a concept from surface chemistry to regulate the oxygen configuration in hierarchically porous carbon nanosheets (HPCNS). It is demonstrated that the C−O/C=O ratio in HPCNS reduces from 1.49 to 0.43 and its graphitization degree increases by increasing the carbonization temperature under a reduction atmosphere. Remarkably, such high graphitization degree and low C−O content of the HPCNS-800 are favorable for promoting its electron/ion transfer kinetics, thus endowing it with high-rate (323.6 mAh g⁻¹ at 0.05 A g⁻¹ and 138.5 mAh g⁻¹ at 20.0 A g⁻¹) and durable (96 % capacity retention over 5700 cycles at 10.0 A g⁻¹) Na⁺ storage performance. This work permits the optimization of heteroatom configurations in carbon for superior Na⁺ storage.