Intramolecular C-H activation by inferred terminal cobalt imido intermediates

Reaction of TpR,MeCo(I) dinitrogen complexes (R = iPr, tBu) with trimethylsilyl azide yields structurally characterized compounds that imply the formation of reactive intermediates of the type TpR,MeCo=NSiMe3. These cobalt imido species apparently abstract hydrogen from the 3-substituent of the Tp-ligand, leading to the formation of amido complexes accompanied by either Co-C bond formation (R = tBu) or C-C bond formation (R = iPr).     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.     

Moderating the nucleophilicity of the sulfide ligands in the dinuclear {Pt2S2} metalloligand system using triphenylarsine

Reaction of cis-[PtCl₂(AsPh₃)₂] with excess sodium sulfide in benzene gave the triphenylarsine analogue of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄] as an orange solid.The compound was characterised by detailed mass spectrometry studies, and by conversion to various alkylated and metallated derivatives.The sulfide ligands in [Pt₂(μ-S)₂(AsPh₃)₄] are less basic than the triphenylphosphine analogue, and the complex gives a relatively weak [M+H]⁺ ion in the positive-ion electrospray (ESI) mass spectrum, compared with the phosphine analogue.Methylation of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with MeI gave the species [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ and [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺, indicating a reduced tendency for the sulfide of [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ to undergo alkylation.The lability of the arsine ligands is confirmed by the reaction of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with n-butyl chloride, giving [Pt₂(μ-S)(μ-SBu)(EPh₃)₄]⁺ (E = P, As), which with Me₂SO₄ gave a mixture of [Pt₂(μ-SMe)(μ-SBu)(PPh₃)₄]²⁺ and [Pt₂(μ-SMe)(μ-SBu)(AsPh₃)₃Cl]⁺.Reactivity towards 1,2-dichloroethane follows a similar pattern.The formation and ESI MS detection of mixed phosphine-arsine {Pt₂S₂} species of the type[Pt₂(μ-S)₂(AsPh₃)_n(PPh₃)_4−n] is also discussed. Coordination chemistry of [Pt₂(μ-S)₂(AsPh₃)₄] towards a range of metal-chloride substrates, forming sulfide-bridged trinuclear aggregates, has also been probed using ESI MS, and found to be similar to the phosphine analogue. The X-ray crystal structure of [Pt₂(μ-S)₂(AsPh₃)₄Pt(cod)](PF₆)₂ (cod = 1,5-cyclo-octadiene) has been determined for comparison with the (previously reported) triphenylphosphine analogue. ESI MS is a powerful tool in exploring the chemistry of this system; in some cases the derivatising agent p-bromobenzyl bromide is used to convert sparingly soluble and/or poorly ionising {Pt₂S₂} species into soluble, charged derivatives for MS analysis.     

Studies in spiroheterocycles. Part XVII. synthesis of novel fluorine containing spiro[indole-pyranobenzopyran] and spiro[indenopyran-indole] derivatives

An elegant one-step synthesis of two novel spiro ring systems viz: spiro[3H-indole-3,4′-(2′-amino-3′-carbonitrile-[4′H]-pyrano[3,2-c]benzopyran)]-2,5′(1H)-dione8 and spiro[(2-amino-3-carbonitrile-indeno[1,2-b]pyran)-4(5H)>3′-[3H]indole]-2′,5(1′H)-diones in 80–85% yields is described. The spiro heterocycles were prepared by the reactions of fluorine containing 3-dicyanomethylene-2H-indol-2-ones with 4-hydroxy-2H-1-benzopyran-2-one and 1H-indene-1,3(2H)-dione respectively. The synthesized compounds have been characterized on the basis of elemental analyses, ir, pmr, ¹⁹F nmr and mass spectral data.     

Ln0.5A0.5MnO3 (Ln=Lanthanide,A= Ca,Sr) Perovskites Exhibiting Remarkable Performance in the Thermochemical Generation of CO and H2 from CO2 and H2O

Perovskite oxides of the Ln_0.5A_0.5MnO₃ (Ln=lanthanide, A=Sr, Ca) family have been investigated for the thermochemical splitting of H₂O and CO₂ to produce H₂ and CO respectively. The amounts of O₂ and CO produced strongly depend on the size of the rare earth ions and alkaline earth ions. The manganite with the smallest rare earth possessing the highest distortion and size disorder as well as the smallest tolerance factor, gives out the maximum amount of O₂, and, hence, the maximum amount of CO. Thus, the best results are found with Y_0.5Sr_0.5MnO₃, which possesses the highest distortion and size disorder. Y_0.5Sr_0.5MnO₃ shows remarkable fuel production activity even at the reduction and oxidation temperatures as low as 1200 °C and 900 °C, respectively.     

Novel Fluorinated Spiro [Indole-indazolyl-thiazolidine]-2,4′-diones: Design and Synthesis

The reaction of indol-2,3-diones ( 1a–i ) with 5-aminoindazole ( 2 ) has resulted in the formation of hitherto unknown 3-(indazol-5-yl)iminoindol-2-ones ( 3a–i ) in quantitative yields which, on 1,3-dipolar cyclocondensation with mercaptoacetic acid ( 4 ), has afforded a series of new spiro heterocycles, 3′-(indazol-5-yl) spiro[3H, indol-3, 2′ -thiazolidine]-2,4′-diones* ( 5a–i ).     

Synthesis of Some Novel bis‐Spiro[indole‐pyrazolinyl‐thiazolidine]‐2,4′‐diones

The reaction of 1H‐indol‐2,3‐diones with 1,6‐dibromohexane has resulted in the formation of new 1H‐indol‐2,3‐diones‐1,1′‐(1,6‐hexanediyl)bis in quantitative yields. These compounds have been used for the synthesis of novel [3′‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl)spiro[3H‐indol‐3,2′‐thiazolidine]‐2,4′‐dione]‐1,1′‐(1,6‐hexanediyl)bis via bis Schiff's bases, [3‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl) imino‐1H‐indol‐2‐one]‐1,1′‐(1,6‐hexanediyl)bis.     

Studies of Nucleophilic Substitution Reactions of p‐Nitrophenyl Acetate with Some Dihydroxamate Ions in Cationic Micellar Media

Pseudo‐first‐order rate constants have been determined for the nucleophilic substitution reactions of p‐nitrophenyl acetate with oxalo, malono, and succinodihydroxamate ions (^?ONHC(O)(CH₂)_nC(O)NHO^?) in phosphate buffer (pH=7.9) at 27°C. The rate data of the reaction revealed that the nucleophilic reactivity sequence of these hydroxamate ions is generally ODHA>MDHA>SDHA. The k_obs value increases upon addition of cationic surfactants to the reaction medium which is typical behavior of micelle‐assisted bimolecular reactions. The pseudo‐phase ion exchange model has been successfully applied to determine binding constant.     

Dielectric and ac impedance studies of nanostructured CaCu3Ti3.90Ce0.10O12 electro-ceramic synthesized by citrate-gel route

Effect of doping at Ti⁴⁺ site by Ce³⁺ has been examined in CaCu₃Ti_3.90Ce_0.10O₁₂ synthesized by citrate-gel route. DTA/TG analysis of dry powder gives pre-information about formation of final product around 850 °C. X ray diffraction analysis confirmed the formation of CaCu₃Ti_3.90Ce_0.10O₁₂ phase of the ceramic sintered at 950 °C for 12 h. Microstructure has been studied using scanning electron microscopy and confirmed the average grain size found in nano range 200–400 nm in system CaCu₃Ti_3.90Ce_0.10O₁₂.The nature of relaxation behavior of ceramic was also rationalized by using the impedance and modulus spectroscopy. The bulk conductivity indicates an Arrhenius-type thermally activated process. The ac conductivity spectrum obeyed the Jonscher power law. The complex impedance diagrams of the ceramic exhibited a significant contribution from the grains, grain boundaries and electrode. The activation energies calculated from the grain-boundary relaxation time constant was found to be 0.49 eV which confirmed the Maxwell–Wagner type of relaxation present in the ceramic.