Study on Viscous Fluid Flow in Disordered-Deformable Porous Media Using Hydro-mechanically Coupled Pore-Network Modeling

Transport in Porous Media - We investigate viscous fluid flows and concurrent fluid-driven deformations in porous media. The hydro-mechanically (H-M) coupled pore-network model (PNM) is developed,...     

MCM-41-SO3H: an efficient,reusable, heterogeneous catalyst for the one-pot,three-component synthesis of pyrano[3,2-b]pyrans

Research on Chemical Intermediates - MCM-41-SO3H, ordered mesoporous silica material MCM-41 with covalently anchored sulfonic acid groups, was used as a solid acid catalyst for the convenient,...     

Controlling a bunch of multiple filaments by means of a beam diameter

We demonstrate a three orders of magnitude increase and stability in the backscattered fluorescence signal from nitrogen molecules by terawatt femtosecond laser pulse induced air filaments using a new method. The method is based on squeezing the initial beam diameter using a telescope. The effect of laser shot-to-shot fluctuations was included in numerical simulations by a random distribution of the initial intensity in both squeezed and non-squeezed beams. Statistical processing of the simulation results shows that the average diameter of plasma channels as well as the total amount of free electrons generated in a bunch of multiple filaments in air is larger in the squeezed beam. Shot-to-shot stability of the simulated plasma density increases in the squeezed beam. The change of this plasma density with propagation distance is in good qualitative agreement with the change of the range-corrected nitrogen fluorescence signal with distance. PACS 42.65.Jx; 42.60.Jf; 42.68.Ay; 42.68.Wt     

Fabrication and Determination of Refractive Index Profile of the Planar Waveguides by Wedge Technique

Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractiveindex profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer andapplying fringe analysis methods.     

Headspace solvent microextraction of trihalomethane compounds into a single drop

Headspace solvent microextraction (HSME) into a single drop is developed for the determination of six trihalomethanes, CH2Cl2, CHCl3, C4H9Cl, CCl4, C2HCl3, and C2Cl4, in aqueous solution. A drop of benzyl alcohol containing bromoform, as an internal standard, is used for extraction. The analytes are extracted by suspending a 3-microL drop directly from the needle of a microsyringe. The needle passes through the septum of a vessel, and the needle tip appears above the surface of the solution. After the prescribed extraction time, the drop is drawn back into the syringe. The syringe is then removed, and its content is injected directly into a gas chromatography column for analysis. The main parameters affecting the HSME process, such as stirring speed, microdrop volume, sample solution temperature, microsyringe needle temperature, sample volume, solution pH, extracting solvent, and ionic strength of the solution, are studied. Also, the linear range and precision of the method are examined.     

Potentiometric determination of ultratrace amounts of fluoride enriched by zirconia in a flow system

A satisfactory method was described for separation and preconcentration of ultratrace amounts of fluoride ions enriched by zirconia (ZrO₂) as an inorganic ion exchanger. Fluoride ions can be adsorbed rapidly and selectively on zirconia from an acidic solution (pH 4.8) then reversibly desorbed by increasing pH up to 13. A flow system consisting of a column packed with zirconia impregnated on cellulose fibers and an ion-selective electrode was used for the determination of fluoride. The RSD was found to be 1.6% and the detection limit defined by S/N = 3 was 3 × 10⁻⁹ mol L⁻¹. The interference effects of various ions, such as nitrate, sulfate, halides, alkaline, and alkaline earth ions, which may be found in the environmental water, were studied, and it was found that they were tolerated even at high concentrations. The method was applied to determine fluoride in drinking water, which contains ultratrace amounts of fluoride. The concentration of fluoride was found to be 42 μg L⁻¹, which is confirmed by spiking 2 μmol fluoride to the drinking water with a recovery of 99%. Published in Russian in Zhurnal Analiticheskoi Khimii, 2006, Vol. 61, No. 2, pp. 179–183. The text was submitted by the authors in English.     

Synthesis and Spectroscopic Study of Some New Phosphoramidates,Crystal Structures of N‐Benzoyl‐N′,N″‐bis(azetidinyl)phosphoric Triamide and N‐Benzoyl‐N′,N″‐bis(hexamethylenyl)phosphoric Triamide

Some new N‐carbonyl, phosphoramidates with formula C₆H₅C(O)N(H)P(O)R₂ (R = NC₃H₆ ( 1 ), NC₆H₁₂ ( 2 ), NHCH₂CH=CH₂ ( 3 ), N(C₃H₇)₂ ( 4 )) and CCl₃C(O)N(H)P(O)R′₂ (R′ = NC₃H₆ ( 5 ), NHCH₂CH=CH₂ ( 6 )) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR and IR spectroscopy and elemental analysis. The structures were determined for compounds 1 and 2 . Compound 1 exists as two crystallographically independent molecules in crystal lattice. Both compounds 1 and 2 produced dimeric aggregates via intermolecular ‐P=O…H‐N‐ hydrogen bonds, which in compound 2 is a centrosymmetric dimer. In compounds with four‐membered ring amine groups, ³J(P,C)>²J(P,C), in agreement with our previous studies about five‐membered ring amine groups. Also, ³J(P,C) values in compounds 1 and 5 are greater than in compounds with five‐, six‐ and seven‐membered ring amine groups.     

An injectable chitosan-based hydrogel reinforced by oxidized nanocrystalline cellulose and mineral trioxide aggregate designed for tooth engineering applications

The complex anatomy of teeth limits the accessibility and efficacy of regenerative treatments. Therefore, the application of well-known inducers as injectable hydrogels for the regeneration of the dentin-pulp complex is considered a promising approach. In this regard, this study aimed to develop an injectable hydrogel containing mineral trioxide aggregate (MTA). The injectable chitosan/oxidized-nanocrystalline cellulose/MTA (CS/OCNC/MTA) hydrogels were prepared, and the physicochemical properties of these hydrogels were evaluated by TGA, FTIR, Rheological analysis, and SEM. Moreover, the effect of MTA on the swelling and degradability of scaffolds was assessed. The proliferative effects of synthesized hydrogels were also determined on human dental pulp stem cells (hDPSCs) by MTT assay. For induction of differentiation and biomineralization in these cells, the alkaline phosphatase activity and Alizarin Red S staining tests were performed in the presence of fabricated scaffolds. The proliferation of hDPSCs was significantly increased in the presence of these hydrogels. Moreover, the addition of MTA to hydrogel structure dramatically improved the differentiation of hDPSCs. These results suggested that this novel injectable hydrogel provides appropriate physiochemical properties and can be considered a promising scaffold for regenerative endodontic procedures.

Graphical abstract

     

Solid Phase Extraction and Flame Atomic Absorption Spectrometric Determination of Trace Amounts of Zinc and Cobalt Ions in Water Samples

A simple and rapid method for the preconcentration of Co²⁺ and Zn²⁺ as their 2-guanidino-benzimidazole chelates is proposed using an octadecyl silica cartridge. The retained analytes were recovered with a mixture of 5mL of 0.01M HNO₃ and 5mL of methanol. The metal ions in the effluent were determined by flame atomic absorption spectrometry. The effect of different parameters, such as sample matrix, amount of ligand, type of eluent for elution of ions from cartridge, flow rates of sample solution and eluent, breakthrough volume, and limit of detection, were evaluated. The effects of various cationic and anionic interferences on the percent recovery of Co²⁺ and Zn²⁺ were also studied. Quantitative extraction efficiencies were obtained by elution of the cartridge with a minimal amount of solvent. Hence, with a typical preconcentration factor of 50, the limits of detections of the proposed method are 0.26 and 1.62ngmL^–1 for Zn²⁺ and Co²⁺, respectively. The method was applied to the determination of zinc and cobalt ions in different water samples.