Shape recognition of alkylammonium ions by 1,3-bridged calix[5]arene crown-6 ethers: endo- vs exo-cavity complexation

A series of tri-O-substituted 1,3-bridged calix[5]arene crown-6 ethers bearing alkyl, arylalkyl, alkoxyalkyl, and alkoxycarbonylmethyl residues at the lower rim and either (t)()Bu or H substituents at the upper rim have been synthesized. (1)H NMR studies have shown that p-tert-butylcalix[5]crowns, irrespective of the size and nature of their lower rim pendant groups, adopt preorganized conelike conformations, whereas p-H-calix[5]crowns with bulky substituents preferentially exist in solution as partial cone conformers (C(1) symmetry). Calix[5]crown derivatives behave as mono- or ditopic receptors for isomeric butylammonium ions, forming endo-cavity (inside the calixarene cup) and/or exo-cavity (at the crown ether moiety) 1:1 complexes according to the shape of the guest. These two binding modes can be clearly distinguished and monitored by (1)H NMR titration experiments.     

New Cyclophanes as Initiator Cores for the Construction of Dendritic Receptors: Host-guest complexation in aqueous solutions and structures of solid-state inclusion compounds

Cyclophanes 3 and 4 were prepared as initiator cores for the construction of dendrophanes (dendritic cydophanes) 1 and 2 , respectively, which mimic recognition sites buried in globular proteins. The tetra-oxy[6.1.6.1]paracyclophane 3 was prepared by a short three-step route (Scheme 1) and possesses a cavity binding site shaped by two diphenylmethane units suitable for the inclusion of flat aromatic substrates such as benzene and naphthalene derivatives as was shown by ¹H-NMR binding titrations in basic D₂O phosphate buffer (Table 1). The larger cyclophane 4 , shaped by two wider naphthyl(phenyl)methane spacers, was prepared in a longer, ten-step synthesis (Scheme 2) which included as a key intermediate the tetrabromocyclophane 5 . ¹H-NMR Binding studies in basic borate buffer in D₂O/CD₃OD demonstrated that 4 is an efficient steroid receptor. In a series of steroids (Table 1), complexation strength decreased with increasing substrate polarity and increasing number of polar substituents; in addition, electrostatic repulsion between carboxylate residues of host and guest also affected the binding affinity strongly. The conformationally flexible tetrabromocyclophane 5 displayed a pronounced tendency to form solid-state inclusion compounds of defined stoichiometry, which were analyzed by X-ray crystallography (Fig. 2). 1,2-Dichloroethane formed a cavity inclusion complex 5a with 1:1 stoichiometry, while in the 1:3 inclusion compound 5b with benzene, one guest is fully buried in the macrocyclic cavity and two others are positioned in channels between the Cyclophanes in the crystal lattice. In the 1:2 inclusion compound 5c , two toluene molecules penetrate with their aromatic rings the macrocyclic cavity from opposite sides in an antiparallel fashion. On the other hand, p-xylene (= 1,4-dimethylbenzene) in the 1:1 compound 5d is sandwiched between the cyclophane molecules with its two Me groups penetrating the cavities of the two macrocycles. In the 1:2 inclusion compound 5e with tetralin (= 1,2,3,4-tetrahydronaphthalene), both host and guest are statically disordered. The shape of the macrocycle in 5a – e depends strongly on the nature of the guest (Fig. 4). Characteristic for these compounds is the pronounced tendency of 5 to undergo regular stacking and to form channels for guest inclusion; these channels can infinitely extend across the macrocyclic cavities (Fig. 6) or in the crystal lattice between neighboring cyclophane stacks (Fig. 5). Also, the crystal lattice of 5c displays a remarkable zig-zag pattern of short Br…?O contacts between neighboring macrocycles (Fig. 7).     

Percolative phenomena in lecithin reverse micelles: the role of water

 The role played by the solvation water molecules on the macroscopically observed sol–gel transition in lecithin/cyclohexane/water reverse micelles is investigated by quasielastic neutron scattering, dielectric relaxation and conductivity measurements. The experimental results are juxtaposed to those from spherical Aerosol OT reverse micelles. It is shown how the results from lecithin-based system can be interpreted only assuming that, in contrast to Aerosol OT systems, the water molecules are entrapped at the interfaces without coalescing into an inner water pool. It is suggested that, in the case of lecithin, the solvation water can induce a change in the surface curvature, in such a way promoting the formation of branch points. Such a hypothesis is supported by the temperature dependence of the conductivity which agrees with the hypothesis of an intermicellar bond percolation. The investigation of the structures imposed by an external electric field is also studied. The observed electrorheological behaviour seems to confirm the existence of a percolated transient network in the gel phase. Received: 21 March 2001 Accepted: 24 August 2001     

Proton controlled intramolecular communication in dinuclear ruthenium(II) polypyridine complexes

The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.     

Dendrophanes: Water-soluble dendritic receptors as models for buried recognition sites in globular proteins

Water-soluble dendritic cyclophanes (dendrophanes) of first ( 1 , 4 ), second ( 2 5 ), and third generation ( 3 6 ) with poly(ether amide) branching and 12, 36, and 108 terminal carboxylate groups, respectively, were prepared by divergent synthesis, and their molecular recognition properties in aqueous solutions were investigated. Dendrophanes 1 – 3 incorporate as the initiator core a tetraoxa[6.1.6.1]paracyclophane 7 with a suitably sized cavity for inclusion complexation of benzene or naphthalene derivatives. The initiator core in 4 – 6 is the [6.1.6.1]cyclo-phane 8 shaped by two naphthyl(phenyl) methane units with a cavity suitable for steroid incorporation. The syntheses of 1 – 6 involved sequential peptide coupling to monomer 9 , followed by ester hydrolysis (Schemes 1 and 4), Purification by gel-permeation chromatography (GPC; Fig. 3) and full spectral characterization were accomplished at the stage of the intermediate poly(methyl carboxylates) 10 – 12 and 23 – 25 , respectively. The third-generation 108-ester 25 was also independently prepared by a semi-convergent synthetic strategy, starting from 4 (Scheme 5). All dendrophanes with terminal ester groups were obtained in pure form according to the ¹³C-NMR spectral criterion (Figs, 1 and 5). The MALDI-TOF mass spectra of the third-generation derivative 25 (mol. wt. 19328 D) displayed the molecular ion as base peak, accompanied by a series of ions [M – n(1041 ± 7)]⁺, tentatively assigned as characteristic fragment ions of the poly(ether amide) cascade. A similar fragmentation pattern was also observed in the spectra of other higher-generation poly(ether amide) dendrimers. Attempts to prepare monodisperse fourth-generation dendrophanes by divergent synthesis failed. ¹H-NMR and fluorescence binding titrations in basic aqueous buffer solutions showed that dendrophanes 1 – 3 complexed benzene and naphthalene derivatives, whereas 4 – 6 bound the steroid testosterone. Complexation occurred exclusively at the cavity-binding site of the central cyclophane core rather than in fluctuating voids in the dendritic branches, and the association strength was similar to that of the complexes formed by the initiator cores 7 and 8 , respectively (Tables 1 and 3). Fluorescence titrations with 6-(p-toluidino)naphthalene-2-sulfonate as fluorescent probe in aqueous buffer showed that the micropolarity at the cyclophane core in dendrophanes 1 - 3 becomes increasingly reduced with increasing size and density of the dendritic superstructure; the polarity at the core of the third-generation compound 3 is similar to that of EtOH (Table 2). Host-guest exchange kinetics were remarkably fast and, except for receptor 3 , the stabilities of all dendrophane complexes could be evaluated by ¹H-NMR titrations. The rapid complexation-decomplexation kinetics are explained by the specific attachment of the dendritic wedges to large, nanometer-sized cyclophane initiator cores, which generates apertures in the surrounding dendritic superstructure.     

Quantitation of protein binding to the capillary wall in acidic, isoelectric buffers and means for minimizing the phenomenon

Notwithstanding the use of acidic, amphoteric, isoelectric buffers with isoelectric points (pI) in the pH 2-3 range, adsorption of proteins to the naked silica wall can be non-negligible. Two such buffers have been tested: iminodiacetic acid (IDA; pI 2.23, apparent pH 3.2 in 7 M urea) and aspartic acid (pI 2.77, apparent pH 3.7 in 7 M urea). Three potential quenchers of such interactions have been tested: hydroxyethylcellulose (HEC; number average molecular mass, Mr 27,000), TEPA (tetraethylenepentamine) and a novel, quatemarized piperazine [N(methyl-N-omega-iodobutyl)-N'-methylpiperazine] (Q-Pip), either alone or in binary and ternary mixtures. Human alpha- and beta-globin chains have been used as test proteins in capillary electrophoresis separations. It has been found that mixtures of these compounds are the worst possible remedy. E.g., a ternary mixture comprising 0.5% HEC, 0.5 mM TEPA and 1 mM Q-Pip still leaves behind 4.5% adsorbed protein onto the silica surface in runs in IDA buffer and 7 M urea (pH 3.2). Conversely, 0.5 mM TEPA or 1 mM Q-Pip, when used alone, minimize adsorption down to only 1.8% and 0.5%, respectively. When the same globin chain separations are performed in Asp and 7 M urea (pH 3.7), the situation is much worse: 44% protein is adsorbed in a ternary mixture of 0.5% HEC, 1 mM Q-Pip and 0.5 mM TEPA. However, when used alone, 0.5 mM TEPA and 1 mM Q-Pip reduce globin adsorption to levels of 8% and 5%, respectively. TEPA and Q-Pip are found to be in all cases the best quenchers of protein interaction to naked fused-silica; in addition they exhibit the unique property of smoothing the base-line and giving reproducible runs. The best method for desorbing bound protein was found to be an electrophoretic step consisting in driving sodium dodecylsulphate micelles from the cathodic reservoir.     

Synthesis of novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]‐pyrazoles and 5H‐pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines as potential antiproliferative agents

The synthesis of new planar derivatives characterized by the presence of a pyridothiopyranopyrazole or pyridothiopyranopyrimidine nucleus, carrying a substituted aryl group, is reported. The novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]pyrazole derivatives were obtained by condensation of 2,3‐dihydro‐3‐hydroxymethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones with appropriate hydrazines. The preparation of 2‐substituted pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines was accomplished from the intermediate 2,3‐dihy‐dro‐3‐dimethylaminomethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones by reaction with the appropriate binucleophile amidines. The antiproliferative activity of some new products was tested by an in vitro assay on human tumour cell lines (HL‐60 and HeLa), but none of them showed any significant effects in the tests performed. Accordingly, linear flow dichroism measurements indicated their inability to form a molecular complex with DNA.     

Investigating the reaction of a novel silica capillary coating compound with proteins/peptides by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

Quaternized piperazine ((N-methyl-N-omega-iodobutyl-N'-methyl)piperazine; QPzl) is a novel compound described as an ideal coating material for the silica capillaries that are commonly used for capillary zone electrophoresis. In the course of such analysis, contact between such coatings and biomolecules may result in certain modifications of the latter. To gain specific information on such potential modifications, solutions at pH 10.0 containing both QPzl and standard proteins/peptides were incubated for various periods and examined by matrix-assisted laser desorption/ionisation mass spectrometry. The reduction of the S-S bridges, denaturation in 8 M urea, the isoelectric point of the protein and the duration of the incubation had a profound influence on the investigated reaction. Analysis in reflectron mode and post source decay identified Cys as the likely site of interaction. The implications of the present measurements for proteome analysis using capillary and gel electrophoresis are discussed.     

Calix[4]- and calix[5]arene-based multicavity macrocycles

Synthesis and single-crystal X-ray structures of mixed triple and double calixarenes 6 and 7, obtained from the base-catalyzed condensation of calix[5]arene 1 with cone pertosylated calix[4]arene 2, are reported. VT-NMR studies on 7 are consistent with a molecular motion arising from the anti-gauche conformational interconversion of its ethylene linkages.     

Homo- and heterometallic [2x2] grid arrays containing RuII, OsII, and FeII subunits and their mononuclear RuII and OsII precursors: synthesis, absorption spectra, redox behavior, and luminescence properties

The absorption spectra, redox behavior, and luminescence properties (both at 77 K in rigid matrices and at room temperature in fluid solution) of a series of [2x2] molecular grids have been investigated. The latter were prepared either by means of sequential self-assembly, or by a stepwise protection/deprotection procedure, and are based on a ditopic hexadentate ligand 1 in which two terpyridine-like binding sites are fused together in a linear arrangement. The molecular grids studied include the homometallic species [[Fe(1)](4)](8+) (Fe(2)Fe(2)), and the heterometallic species [[Ru(1)](2)[Fe(1)](2)](8+) (Ru(2)Fe(2)) and [[Os(1)](2)[Fe(1)](2)](8+) (Os(2)Fe(2)). For comparison purposes, the properties of the mononuclear complexes [Ru(1)(2)](2+) (1-Ru) and [Os(1)(2)](2+) (1-Os) have been studied. All these compounds exhibit very intense absorption bands in the UV region (epsilon in the 10(5)-10(6) M(-1) cm(-1) range, attributed to spin-allowed ligand-centered (LC) transitions), as well as intense metal-to-ligand charge-transfer (MLCT) transitions (epsilon in the 10(4)-10(5) M(-1) cm(-1) range) that extend to the entire visible region. The mononuclear species 1-Ru and 1-Os exhibit relatively intense luminescence, both in acetonitrile at room temperature (tau=59 and 18 ns, respectively) and in butyronitrile rigid matrices at 77 K. In contrast, the tetranuclear molecular grids do not exhibit any luminescence, either at room temperature or at 77 K. This is attributed to fast intercomponent energy transfer from the Ru- or Os-based subunits to the low-lying metal-centered (MC) levels involving the Fe(II) centers, which leads to fast radiationless decay. The redox behavior of the compounds is characterized by several metal-centered oxidation and ligand-centered reduction processes, most of them reversible in nature (as many as twelve for Fe(2)Fe(2)). Detailed assignment of each redox process has been made, and it is apparent that these systems can be viewed as multilevel molecular electronic species capable of reversibly exchanging a number of electrons at accessible and predetermined potentials. Furthermore, it is shown that the electronic interaction between specific subunits depends on their location in the structure and on the oxidation states of the other components.