Solid phase synthesis of azapeptides using an automatic synthesizer

Peptides containing azaglycine located terminally or within the backbone have been prepared in the solid phase by means of an automatic synthesizer.     

Vibration analysis of planar serial-frame structures

A hybrid analytical/numerical method is proposed that permits the efficient dynamic analysis of planar serial-frame structures. The method utilizes a numerical implementation of a transfer matrix solution to the equation of motion. By analyzing the transverse and longitudinal motions of each segment simultaneously and considering the compatibility requirements across each frame angle, the undetermined variables of the entire frame structure system can be reduced to six which can be determined by application of the boundary conditions. The main feature of this method is to decrease the dimensions of the matrix involved in the finite element methods and certain other analytical methods.     

Minimum Disparity Estimation in Linear Regression Models: Distribution and Efficiency

This paper deals with the minimum disparity estimation in linear regression models. The estimators are defined as statistical quantities which minimize the blended weight Hellinger distance between a weighted kernel density estimator of errors and a smoothed model density of errors. It is shown that the estimators of the regression parameters are asymptotic normally distributed and efficient at the model if the weights of the density estimators are appropriately chosen.     

Characterisation of adsorbed layers on sulphide minerals by photoelectron spectroscopy

The systems galena/2-mercaptobenzothiazole (MBT) and pyrite/MBT have been studied using synchrotron radiation excited photoelectron spectroscopy (SRXPS). The chemisorption of MBT and the multilayer formation of 2,2′-dithiobis(benzothiazole) (BBTD) are evidenced by additional structures, observed beside the substrate signals, in the S2p-spectra of cleaved mineral surfaces after adsorption of MBT. The amount of the complex remains constant at concentrations as high as 10^–5 mol/L whereas the amount of BBTD increases. From the dependence of the adsorbate intensities on the excitation energy the conclusion can be drawn that an overlayer of BBTD on a chemisorbed layer of MBT is formed. The very weak adsorption of MBT on pyrite in alkaline solutions may explain the selective flotation of galena from pyrite in alkaline media.     

An efficient synthesis of novel carbocyclic nucleosides with use of ring-closing metathesis from D-lactose

This paper describes an efficient synthetic route for various types of novel carbocyclic nucleosides. The required stereochemistry of the targeted nucleosides was successfully obtained with use of Grubbs cyclization and Trost allylic alkylation from the carbohydrate chiral template "D-lactose".     

Poly(dimethylsiloxane) microchip for precolumn reaction and micellar electrokinetic chromatography of biogenic amines

We have demonstrated that precolumn derivatization and capillary electrophoresis separation on a poly(dimethylsiloxane) (PDMS) microchip can be realized as efficient as those on glass microchips. In an optimized condition of micellar electrokinetic chromatography (MEKC), using 25 mM sodium borate buffer (pH 10.0) with 25 mM sodium dodecyl sulfate (SDS) and 5% v/v methanol, the electroosmotic flow in an oxidized PDMS microchip is stabilized within 3% for days. By employing a fluorometric derivatization with o-phthaldialdehyde (OPA) in an optimally designed reaction chamber, four most important biogenic amines occurring in foods, histamine, tyramine, putrescine, and tryptamine, are quantitatively determined in less than 1 min at the levels applicable to real samples. The migration behaviors of anionic OPA-derivatized biogenic amines under the MEKC conditions are analyzed, and it has been found that under our separation conditions, the electrophoretic mobility of the SDS micelles is significantly greater than those of the anions in the aqueous phase. The channel manifold in a PDMS substrate is fabricated using replica molding against a thick photoresist, SU-8, pattern generated by photolithography. The plate with the microchannel pattern is strongly, irreversibly bonded to another PDMS plate by using a new bonding technique, which employs surface oxidation by corona discharge generated from a cheap, handy source, Tesla coil.     

On distributions of antibaryons in\bar p-Nucleus inelastic collisions

In the framework of the dual parton model we calculate the spectra of secondary antibaryons in \(\bar p\) -nucleus non-annihilation inelastic interactions. We find that the number of antibaryons in the backward hemisphere in the \(\bar p\) -nucleon centre-of-mass frame can grow with the atomic number of the nucleus.     

Nioboxidfluoride mit Blockstrukturen — Elektronenmikroskopische Durchstrahlungsaufnahmen und ihre Simulation

Niobiumoxidefluorides Nb₅₉O₁₄₇F, Nb₃₁O₇₇F, Nb₆₅O₁₆₁F₃ and Nb₃₄O₈₄F₂ were prepared by reaction of Nb₂O₅ and Nb₃O₇F at 1 270°C. These niobiumoxidefluorides have blockstructures which were examined by high resolution electron microscopy. The observed images of the crystal structures were compared with computer simulated images.

     

Establishment of traceability of ammonium nitrogen determination in wastewater

A case study is presented for the establishment of traceability for ammonium nitrogen determination in wastewater in a routine laboratory in order to fulfil the requirements of ISO/IEC standard 17025. The necessary relevant information was obtained from the method validation data, the quality control data and equipment calibration certificates. The method of measurement is described together with the measurement equation, selected traceable reference standards and the associated measurement uncertainty. The major sources of uncertainty of the result of measurement were identified and the combined uncertainty was calculated. Identification of the main uncertainty sources represents the basis for target operations for reducing the measurement uncertainty of this determination.     

Material profile influences in bulk‐heterojunctions

The morphology in mixed bulk‐heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high‐angle annular dark‐field scanning transmission electron microscopy with electron tomography and neutron and x‐ray reflectometry. The three measurement techniques yield qualitatively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the absolute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1291–1300