Experimental investigation for stability and surface properties of TiO2 and Al2O3 water-based nanofluids

Journal of Thermal Analysis and Calorimetry - Nanofluids have gained recent attention because of their potential applications in diverse engineering fields like enhancing thermal transport,...     

Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

Application of polymer-supported triphenyl phosphine in the palladium-catalyzed cyanation reaction under microwave conditions

A variety of aryl nitriles were prepared in excellent yields from the palladium acetate catalyzed coupling of aryl halides with Zn(CN)₂ using polymer-supported triphenyl phosphine as the ligand and dimethylformamide as solvent under microwave irradiation conditions.     

Multibody dynamics of aircraft occupants seated behind interior walls

To improve aircraft crash safety, conditions critical to occupants survival during a crash must be known. In view of the importance of this problem, studies of post-crash dynamic behavior of victims are necessary in order to reduce severe injuries. In this study, crash dynamics program SOM-LA/TA, incorporating a dynamic model of the human body with a finite element model of the seat structure was used. Modifications were performed in the program for reconstruction of an occupant's head impact with the interior walls or bulkhead. A viscoelastic-type contact force model was used to represent the compliance characteristics of the bulkhead. Correlated studies of analytical simulations with impact sled test results were accomplished. A parametric study of the coefficients in the contact force model was then performed in order to obtain the correlations between the coefficients and the Head Injury Criteria. A measure of optimal values for the bulkhead compliance and displacement requirements was thus achieved in order to keep the possibility of a head injury as little as possible. This information could in turn be used in the selection of suitable materials for the bulkhead, instrument panel, or interior walls of an aircraft.     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

Bounds on the inverses of nonnegative triangular matrices with monotonicity properties

Some bounds on the entries and on the norm of the inverse of triangular matrices with nonnegative and monotone entries are found. All the results are obtained by exploiting the properties of the fundamental matrix of the recurrence relation which generates the sequence of the entries of the inverse matrix. One of the results generalizes a theorem contained in a recent article of one of the authors about Toeplitz matrices.     

Electronic, cyclic voltammetry, IR and EPR spectral studies of copper(II) complexes with 12-membered N4, N2O2 and N2S2 donor macrocyclic ligands

A new series of copper(II) complexes have been synthesized with macrocyclic ligands having three different donating atoms in the macrocyclic ring. It has been shown that the stereochemistry of complexes is dependent on the coordinated anions. These complexes are characterized by various physicochemical techniques, viz. elemental analysis, molar conductance, magnetic susceptibility measurements, IR, electronic, 1H NMR and EPR spectral studies. Cyclic voltammetric behavior of the complexes has also been discussed. The observed anisotropic g-values indicate that the chloro and acetato complexes are six-coordinate tetragonal. Whereas the sulfato and nitrato complexes are found to have five-coordinate square-pyramidal and four-coordinate square-planar geometry, respectively.     

Substituted m-phenylene bridges as strong ferromagnetic couplers for Cu(II)-bridge-Cu(II) magnetic interactions: new perspectives

Based on a combined theoretical-experimental study, we propose that substituted m-phenylene ligands (m-N-Phi-N) can act as tuneable strong ferromagnetic couplers connecting Cu(II) ions; a new complex presenting that bridge with J close to +15 cm(-1) has been suggested and synthesized.     

General solution for Poisson-Boltzmann equation in semiinfinite planar symmetry

Self-assembled multilayer thin films have been prepared on Au substrate by alternate surface derivatization with L-cysteine hydrochloride and cupric perchlorate. The layer-by-layer structure at each step of multilayer formation was investigated by X-ray photoelectron spectroscopy. The measurements indicate that there are two structure modes in the multilayers. One is that Cu(2+) sandwiches between two amino acid groups. The other one is that Cu(+) is bonded through disulfide and thiolate. This process is also confirmed by cyclic voltammetry of Cu ion at different self-assembled multilayers. Steps further on will lead to repeated multilayer films.     

Design and optimization of on-chip capillary electrophoresis

We present a systematic, experimentally validated method of designing electrokinetic injections for on-chip capillary electrophoresis applications. This method can be used to predict point-wise and charge-coupled device (CCD)-imaged electropherograms using estimates of species mobilities, diffusivities and initial sample plug parameters. A simple Taylor dispersion model is used to characterize electrophoretic separations in terms of resolution and signal-to-noise ratio (SNR). Detection convolutions using Gaussian and Boxcar detector response functions are used to relate optimal conditions for resolution and signal as a function of relevant system parameters including electroosmotic mobility, sample injection length, detector length scale, and the length-to-detector. Analytical solutions show a tradeoff between signal-to-noise ratio and resolution with respect to dimensionless injection width and length to the detector. In contrast, there is no tradeoff with respect to the Peclet number as increases in Peclet number favor both SNR and separation solution (R). We validate our model with quantitative epifluorescence visualizations of electrophoretic separation experiments in a simple cross channel microchip. For the pure advection regime of dispersion, we use numerical simulations of the transient convective diffusion processes associated with electrokinetics together with an optimization algorithm to design a voltage control scheme which produces an injection plug that has minimal advective dispersion. We also validate this optimal injection scheme using fluorescence visualizations. These validations show that optimized voltage scheme produces injections with a standard deviation less than one-fifth of the width of the microchannel.