Theoretical study of unimolecular rearrangements of vinylidenes to acetylenes

The rearrangement of vinylidene to acetylene has been studied in detail by the density functional method, using Becke's three‐parameter exchange functional and the gradient‐corrected functional of Lee, Yang, and Parr. The rearrangement of the anion, as well as that of fluoro‐substituted systems, has also been investigated, in order to determine the effect of fluorine substitution on the activation barrier to the 1,2‐hydrogen shift, as well as the relative migratory aptitudes of hydrogen and fluorine. Natural bond orbital analysis is invoked to gain insight into the mechanisms of the rearrangements. Basis size effects are also discussed, particularly in relation to anionic systems. The need to include diffuse functions in geometry optimizations of anionic systems is reinforced by the present calculations. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Mirror image nanostructures

Chiral molecules that self-assemble to form chiral supramolecular structures exhibit interesting structural features reminiscent of tertiary and quaternary structures of proteins and have applications in catalysis and nonlinear optics. Often, these structures are hierarchical, with their chiral structure difficult to interpret on the molecular scale. In this communication, we observe chiral assembling molecules that form well-defined helices with a pitch of 28 nm. We observe the behavior in both R- and S-enantiomers of the molecule, forming mirror image nanostructures. The molecular chirality is determined by the dimethyloctyl alkyl coil of the molecule and is located more than 4 nm from the hydrogen-bonding segment. The nanostructures observed are not hierarchical, which could be a result of the significant separation between the stereocenter and hydrogen-bonding dendron. The subtle structural modification at the periphery of the molecule biases the supramolecular assembly, which is driven primarily by strong hydrogen-bonding and pi-pi stacking interactions.     

Enantioselective separation on a naturally chiral surface

Kinked-stepped, high Miller index surfaces of metal crystals are chiral and, therefore, exhibit enantiospecific properties. Previous temperature-programmed desorption (TPD) spectra have shown that the desorption energies of R-3-methylcyclohexanone (R-3-MCHO) on the chiral Cu(643)(R) and Cu(643)(S) surfaces are enantiospecific (J. Am. Chem. Soc. 2002, 124, 2384). Here, a comparison of the TPD spectra from Cu(111), Cu(221), Cu(533), Cu(653)(R&S), and Cu(643)(R&S) surfaces reveals that the enantiospecific desorption occurs from the chiral kink sites on the Cu(643) surfaces. Titration of the chiral kink sites with I atoms confirms this assignment of desorption features in the TPD spectra. Finally, the enantiospecific difference in the desorption energies of R- and S-3-MCHO has been used as the basis for demonstration of an enantioselective, kinetic separation of racemic 3-MCHO into its purified components during adsorption and desorption on the Cu(643)(R&S) surfaces.     

Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan

A highly selective and sensitive electrochemical sensor has been developed by modification of a glassy carbon electrode (GCE) with graphene (GRP) for quantification of Rizatriptan. The significant increase of the peak current and the improvement of the oxidation peak potential indicate that the electrochemical sensor facilitates the electron transfer of Rizatriptan. The oxidation peak current was proportional to the Rizatriptan concentration in the range from 100 to 600 µg/mL with detection (LOD) and quantification limit (LOQ) of 36.52 and 121.73 µg/mL, respectively. The developed method was successfully employed for quantification of Rizatriptan in pharmaceutical formulations. The sensor shows great promise for simple, sensitive and quantitative detection of Rizatriptan.     

High-rate and high-density gas separation adsorbents and manufacturing method

High-rate and high-density gas separation adsorbents used in vacuum pressure swing adsorption (VPSA) processes are described. Agglomerated zeolite Li–LSX compositions made using colloidal silica binding agents and having improved nitrogen pore diffusivity compared to like compositions prepared with traditional clay binders, are also described. Preparation methods for the colloidal silica-bound adsorbents are described together with their characterization by mercury (Hg) porosimetry, scanning electron microscopy (SEM) and low dead-volume breakthrough testing, from which the pore diffusivity is obtained. In this article, we show how the location and dispersion of the colloidal silica binding agent within the agglomerated zeolite particle yields pore-architectures that resemble “state-of-the-art” binderless adsorbents. In addition, we use VPSA process simulations to show that the best process performance is achieved by the combination of high-rate and high-density adsorbent properties.     

HPLC–PDA identification and resolution of rufinamide forced degradation impurities: A congregated chemometric expedite optimization coupled with factorials and desirability

Rufinamide is used presently to treat Lenaux–Gastaut syndrome. A full factorial design and desirability approach was investigated for the optimization of hydrolytic stress via response surface curves (RSCs). The degradation impurities were identified and resolved using reversed-phase high-performance liquid chromatography (RP-HPLC) on the Qualisil® BDS C₈ column. Acetonitrile–water (29:71, v/v) was optimized for the mobile phase and used at a flow rate of 1.0 ml/min with detection at a wavelength of 230 nm. Rufinamide showed appreciable susceptibility to hydrolysis under acidic and alkaline stress, and substantial degradation in the neutral condition. It degraded much less under oxidative stress. Exposure towards thermal and photolytic stress conditions indicated appreciable stability. The developed method was subjected to validation as per the recommendations of the International Conference on Harmonization. The proposed method showed no influence from the excipients and the degradation products. As well as good precision and accuracy in determination, the method showed a linear response between 2 and 12 μg ml⁻¹. The method was extended for determination in a human plasma sample, which resulted in excellent recovery without interference from matrix effects. The combined use of desirability and design for the optimization of acidic and alkaline hydrolytic stress led to simple and rapid analysis.     

Electrochemical determination of thermodynamic properties of DyRhO3 and phase relations in the system Dy-Rh-O

Thermodynamic properties of Dysprosium rhodite (DyRhO₃) are measured in the temperature range from 900 to 1,300 K using a solid-state electrochemical cell incorporating yttria-stabilized zirconia as the electrolyte. The standard Gibbs free energy of formation of DyRhO₃ with O-type perovskite structure from its components binary oxides, Dysprosia with C-rare earth structure and β-Rh₂O₃ with orthorhombic structure, can be represented by the equation: $$ {{{\varDelta G_{{f\left( {ox} \right)}}^o\left( {\pm 182} \right)}} \left/ {{{\mathrm{J} ~ \mathrm{mo}}{{\mathrm{l}}^{{ - 1}}}}} \right.} = - 52710 + 3.821\left( {{{T} \left/ {\mathrm{K}} \right.}} \right). $$ By using the thermodynamic data for DyRhO₃ from experiment and auxiliary data for other phases from the literature, the phase relations in the system Dy-Rh-O are computed. Thermodynamic data for intermetallic phases in the binary system Dy-Rh, required for constructing the chemical potential diagrams, are evaluated using calorimetric data available in the literature for three intermetallics and Miedema’s model, consistent with the phase diagram. The results are presented in the form of Gibbs triangle, oxygen potential–composition diagram, and three-dimensional chemical potential diagram at 1,273 K. Temperature–composition diagrams at constant oxygen partial pressures are also developed. The decomposition temperature of DyRhO₃ is 1,732 (±2.5) K in pure oxygen and 1,624 (±2.5) K and in air at standard pressure.     

Synthesis and thermal evaluation of novel mono- and bis-adamantylated resorcinol-based phthalonitrile resins with enhanced solubility

Journal of Thermal Analysis and Calorimetry - Phthalonitrile (PN) resins are high-temperature-resistant thermosetting polymers which find applications in military as well as aerospace owing to...     

Enzymatic synthesis of oligosaccharides, alkyl and terpenyl glucosides, by recombinant Escherichia coli-expressed Pichia etchellsii β-glucosidase II

The biosynthetic activity of yeast Pichia etchellsii β-glucosidase II (BglII) expressed in recombinant Escherichia coli was utilized for synthesis of cellooligosaccharides, alkyl and terpene glucosides. Cellooligosaccharides with a degree of polymerization of 3 and greater were resolved by thin-layer chromatography (TLC) using an ethyl acetate: 1-propanol:2-propanol:water (8:5:1:1) solvent system followed by visualization with 0.2% naphthoresorcinol reagent. Using 2M cellobiose and 15 IU of partially purified BglII, 57 mmol/L of oligosaccharides (comprising mostly cellotriose and cellopentaose) was synthesized in 16 h. Similarly, alkyl glucosides with chain lengths from 6 to 10 carbons were synthesized and products extracted to near purity by ethylacetate extraction. The same extraction method was employed to separate, to near purity, various monoterpenyl (nerol, geraniol, citronellol) glucosides. A reliable and simple method for separation of cellooligosaccharides using a combination of Bio-Gel P-2 gel filtration and charcoal celite adsorption chromatography was developed. The cellooligosaccharides were separated to purity as confirmed by TLC. The enzyme was among the very few that could synthesize a wide variety of glycoconjugates.