Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Three Short Stories about Hexaarylbenzene–Porphyrin Scaffolds

A feasible two‐step synthesis and characterization of a full series of hexaarylbenzene (HAB) substituted porphyrins and tetrabenzoporphyrins is presented. Key steps represent the microwave‐assisted porphyrin condensation and the statistical Diels–Alder reaction to the desired HAB‐porphyrins. Regarding their applications, they proved to be easily accessible and effective high molecular mass calibrants for (MA)LDI mass spectrometry. The free‐base and zinc(II) porphyrin systems, as well as the respective tetrabenzoporphyrins, demonstrate in solid state experiments strong red‐ and near‐infrared‐light emission and are potentially interesting for the application in “truly organic” light‐emitting devices. Lastly, they represent facile precursors to large polycyclic aromatic hydrocarbon (PAH) substituted porphyrins. We prepared the first tetra‐hexa‐peri‐hexabenzocoronene substituted porphyrin, which represents the largest prepared PAH‐porphyrin conjugate to date.     

Highly efficient water‐soluble visible light photoinitiators

The monoacylphosphineoxide (MAPO) salts Na‐TPO and Li‐TPO and the bisacylphosphineoxide (BAPO) salts BAPO‐ONa and BAPO‐OLi define an important and in the latter case a new class of water‐soluble photoinitiators (PIs) for radical polymerization. These compounds showed excellent water‐solubility of at least 29 g/L for Na‐TPO and up to 60 g/L for BAPO‐ONa in deionized water, thus exceeding the solubility of the state of the art PI for water‐based systems Irgacure 2959 ( I2959 ) 6‐ to 12‐fold. However, biocompatibility, storage stability, and reactivity were equally important to replace the state of the art compounds. Concerning these properties, the MAPO and BAPO salts were at least in the same range (biocompatibility, stability) or showed even better results (reactivity) and had the additional advantage of visible light initiation. Na‐TPO and Li‐TPO achieved double bond conversions of an aqueous solution of N‐acryloylmorpholine over 97% with broad band irradiation (320–500 nm), Li‐TPO showed additionally very good biocompatibility (LC₅₀ = 3.1 mmol/L) and BAPO‐OLi showed highest reactivity with visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 473–479     

Allyl sulfides and α‐substituted acrylates as addition–fragmentation chain transfer agents for methacrylate polymer networks

The rapid and uncontrolled nature of network formation from di(meth)acrylate monomers produces high shrinkage stress and results in polymers with oftentimes brittle mechanical properties. Methods for regulating polymerization and network formation are sought. One option is the use of addition–fragmentation chain transfer (AFCT) agents, which are well known to control molecular weight and molecular weight distribution of monofunctional (meth)acrylates. A series of novel and previously described AFCT reagents were synthesized and screened with laser flash photolysis to determine reactivity. Well‐performing AFCT reagents were then tested in polymerizations with monofunctional and difunctional methacrylates. With monofunctional monomers, the molecular weight and polydispersity of the resultant linear polymers tend to decrease with the addition of AFCT agent. In copolymerization with dimethacrylate monomers, the AFCT agents were found to substantially lower and sharpen the glass transition. Sharpness of the glass transition is here indicative of a more regular and homogenous network. After coupling of the instruments, photorheology was performed simultaneously with real‐time IR to show an increase in monomer conversion at the time of gelation, which appears to have a positive effect on reducing shrinkage stress. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 394–406     

Making Use of the Direct Process Residue: Synthesis of Bifunctional Monosilanes

The industrial production of monosilanes Me_nSiCl_4−n (n=1–3) through the Müller–Rochow Direct Process generates disilanes Me_nSi₂Cl_6−n (n=2–6) as unwanted byproducts (“Direct Process Residue”, DPR) by the thousands of tons annually, large quantities of which are usually disposed of by incineration. Herein we report a surprisingly facile and highly effective protocol for conversion of the DPR: hydrogenation with complex metal hydrides followed by Si−Si bond cleavage with HCl/ether solutions gives (mostly bifunctional) monosilanes in excellent yields. Competing side reactions are efficiently suppressed by the appropriate choice of reaction conditions.     

Selective 3,3-Rearrangement of Azobenzenes upon Complexation by a Frustrated Lewis Pair

The reaction of the oxygen-bridged frustrated Lewis pairs (FLPs) tBu₂P−O−Si(C₂F₅)₃ ( 1 ) and tBu₂P−O−AlBis₂ ( 2 ) with azobenzene, promoted by UV irradiation, led to a selective complexation of the cis-isomer. The addition product of 2 is stable, while the adduct of 1 isomerizes in solution in an ortho-benzidine-like [3,3]-rearrangement by cleavage of the N−N bond, saturation of the nitrogen atoms with hydrogen atoms and formation of a new bond between two phenyl ortho-carbon atoms. Similar rearrangements take place with different para-substituted azobenzenes (R=Me, OMe, Cl) and di(2-naphthyl)diazene, while ortho-methylated azo compounds do not form adducts with 1 . All adducts were characterized by multinuclear NMR spectroscopy and elemental analyses and the mechanism of the rearrangement was explored by quantum-chemical calculations.     

CycloSiFA: The Next Generation of Silicon-Based Fluoride Acceptors for Positron Emission Tomography (PET)

The ring-opening Si-fluorination of a variety of azasilole derivatives cyclo-1-(iPr₂Si)−4-X−C₆H₃−2-CH₂NR ( 4 : R=2,6-iPr₂C₆H₃, X=H; 4 a : R=2,4,6-Me₃C₆H₂, X=H; 9 : R=2,6-iPr₂C₆H₃, X=tBuMe₂SiO; 10 : R=2,6-iPr₂C₆H₃, X=OH; 13 : R=2,6-iPr₂C₆H₃, X=HCCCH₂O; 22 : R=2,6-iPr₂C₆H₃, X=tBuMe₂SiCH₂O) with different ¹⁹F-fluoride sources was studied, optimized and the experience gained was used in a translational approach to create a straightforward ¹⁸F-labelling protocol for the azasilole derivatives [¹⁸F] 6 and [¹⁸F] 14 . The latter constitutes a potential clickable CycloSiFA prosthetic group which might be used in PET tracer development using Cu-catalysed triazole formation. Based on our findings, CycloSiFA has the potential to become a new entry into non-canonical labelling methodologies for radioactive PET tracer development.     

Experimental and Theoretical Structure Elucidation of the [2 : 1] Complex Ion of Carbo[n]helicene with n=6, 7 and 8 and Ag+

Gas-phase complexes of [n]helicenes with n=6, 7 and 8 and the silver(I) cation are generated utilizing electrospray ionization mass spectrometry (ESI-MS). Besides the well-established [1 : 1] helicene/Ag⁺-complex in which the helicene provides a tweezer-like surrounding for the Ag⁺, there is also a [2 : 1] complex formed. Density functional theory (DFT) calculations in conjunction with energy-resolved collision-induced dissociation (ER-CID) experiments reveal that the second helicene attaches via π-π stacking to the first helicene, which is part of the pre-formed [1 : 1] tweezer complex with Ag⁺. For polycyclic aromatic hydrocarbons (PAHs) of planar structure, the [2 : 1] complex with silver(I) is typically structured as an Ag⁺-bound dimer in which the Ag⁺ would bind to both PAHs as the central metal ion (PAH–Ag⁺–PAH). For helicenes, the Ag⁺-bound dimer is of similar thermochemical stability as the π-π stacked dimer, however, it is kinetically inaccessible. Coronene (Cor) is investigated in comparison to the helicenes as an essentially planar PAH. In analogy to the π-π stacked dimer of the helicenes, the Cor−Ag⁺−Cor−Cor complex is also observed. Competition experiments using [n]helicene mixtures reveal that the tweezer complexes of Ag⁺ are preferably formed with the larger helicenes, with n=6 being entirely ignored as the host for Ag⁺ in the presence of n=7 or 8.     

Amorphous Silicon: New Insights into an Old Material

Amorphous silicon is synthesized by treating the tetrahalosilanes SiX₄ (X=Cl, F) with molten sodium in high boiling polar and non‐polar solvents such as diglyme or nonane to give a brown or a black solid showing different reactivities towards suitable reagents. With regards to their technical relevance, their stability towards oxygen, air, moisture, chlorine‐containing reaction partners RCl (R=H, Cl, Me) and alcohols is investigated. In particular, reactions with methanol are a versatile tool to deliver important products. Besides tetramethoxysilane formation, methanolysis of silicon releases hydrogen gas under ambient conditions and is thus suitable for a decentralized hydrogen production; competitive insertion into the MeO?H versus the Me?OH bond either yields H‐ and/or methyl‐substituted methoxy functional silanes. Moreover, compounds, such as Me_nSi(OMe)_4?n (n=0–3) are simply accessible in more than 75 % yield from thermolysis of, for example, tetramethoxysilane over molten sodium. Based on our systematic investigations we identified reaction conditions to produce the methoxysilanes Me_nSi(OMe)_4?n in excellent (n=0:100 %) to acceptable yields (n=1:51 %; n=2:27 %); the yield of HSi(OMe)₃ is about 85 %. Thus, the methoxysilanes formed might possibly open the door for future routes to silicon‐based products.