Similar Structural Dynamics for the Degradation of CH3NH3PbI3 in Air and in Vacuum

We investigate the degradation path of MAPbI₃ (MA=methylammonium) films over flat TiO₂ substrates at room temperature by means of X‐ray diffraction, spectroscopic ellipsometry, X‐ray photoelectron spectroscopy, and high‐resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI₂. We describe how this degradation product is structurally coupled with the original MAPbI₃ lattice through the orientation of its constituent PbI₆ octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH₃NH₂ or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.     

Efficient biocatalysis for the production of enantiopure (S)-epoxides using a styrene monooxygenase (SMO) and Leifsonia alcohol dehydrogenase (LSADH) system

Herein we report the production of enantiopure epoxides through biocatalysis using recombinant Escherichia coli cells expressing Rhodococcus sp. ST-10 styrene monooxygenase (SMO) and Leifsonia sp. S749 alcohol dehydrogenase (LSADH) genes are described. Rhodococcus sp. ST-10 SMO catalyzed the epoxidation of various alkenes, including styrene derivatives, vinyl pyridines, and linear alkenes, to give (S)-epoxides. NADH was regenerated by the reduction of NAD⁺ by LSADH with 2-propanol. The E. coli biocatalyst was used in an aqueous/organic biphasic reaction system and the reaction conditions were optimized. Under the optimized conditions, 170 mM of (S)-styrene oxide was obtained from styrene in the organic phase with excellent enantiomeric excess (99.8%). This biocatalytic process was used to synthesize various (S)-epoxides.     

Mössbauer Spectra of FePS3-Cobaltocene Intercalation Compound

Abstract

Mössbauer spectra of the FePS₃-cobaltocene intercalation compound were measured in the temperature range of 300K to 10K. The spectra, distinct from those of pure FePS₃, suggest the charge transfer from cobaltocene to Fe-S antibonding orbitals of the FePS₃ host lattice.     

Determination of trace amounts of sodium and lithium in zirconium dioxide (ZrO2) using liquid electrode plasma optical emission spectrometry

This paper describes a quantitative measurement of trace elements (Na, Li) in high purity zirconium dioxide powder using liquid electrode plasma optical emission spectrometry (LEP-OES). Conventionally, for such type of measurements, inductively coupled plasma optical emission spectrometry (ICP-OES) is frequently employed. The detection limits of elements in zirconium by ICP-OES are degraded due to the spectra interference between the trace elements and zirconium of the matrix, because zirconium is a line rich element in spectra obtained by ICP-OES. LEP-OES is an elemental analysis method developed by the authors. The measurement principle is simple, as follows. Sample solution is put into a narrow channel on a small cuvette and voltage pulse is applied from both ends of the channel. At the center of the channel which is made narrower, the voltage and current are concentrated there, and plasma is generated. From the emission of the plasma, the quantitative analysis of the elements in the solution is achieved. The LEP-OES has the property that the emission of zirconium is relatively weak, so that highly sensitive measurement of trace elements in zirconium matrix can be conducted without interference. Sample solution is prepared by dissolving high purity zirconium dioxide powder and trace amounts of Na or Li with sulfuric acid. The voltage dependence and the pulse width dependence of optical emission spectra are also investigated. With increase of the voltage or the pulse width, the ratio of emission intensities of Na to those of hydrogen increases. This suggests that the ratio of sensitivity of two elements is variable, that means the element selectivity is controllable to some extent by the measurement conditions in LEP-OES. In the case of Na and H, the ratio can be controlled from 7.4 to 21.6%. Finally, the detection limits (3S.D.) of the trace elements, Na and Li, in 4000 μg g⁻¹ zirconium dioxide aqueous solution are found to be 0.02 and 0.133 μg g⁻¹, respectively. These values correspond to 5 μg g⁻¹ for Na, 33.25 μg g⁻¹ for Li in original high purity zirconium dioxide powder. The correlation coefficient of calibration curve was 0.995 for Na, 0.985 for Li. Those are comparable to the literature values of detection limits using ICP-OES.     

Synthesis and DNA-recognition behavior of a novel peptide ribonucleic acid with a serine backbone (oxa-PRNA)

(2S)-2-Fmoc-amino-3-(5′-deoxyuridinylamino)-3-oxopropyloxyacetic acid was synthesized from l-serine as a monomer for preparing the second-generation peptide ribonucleic acid with an oxa-peptide backbone (oxa-PRNA). The ether linkage was incorporated to improve the modest solubility in aqueous solution of the original PRNA with an iso-glutamine backbone, without harming the ability of the amino-uridine side chain to switch the anti/syn nucleobase orientation by adding borax. Indeed, CD spectral examinations revealed that the Fmoc-protected oxa-PRNA uridine monomer (Fmoc-oxa-PRNA(U)), synthesized in three steps, switched the nucleobase orientation from anti to syn in phosphate buffer upon addition of borax. Homo-12mers of oxa-PRNA(U) with and without Arg end caps were prepared in moderate yields by the Fmoc solid-phase synthesis. Both of the N- and C-terminus-capped oxa-PRNA(U) 12mers thus synthesized were shown to hybridize with the complementary DNA 12mer (d(A₁₂)) with stabilities comparable to that observed for the natural pair.     

Mechanistic discussion of cationic crosslinking copolymerizations of 1,2‐epoxycyclohexane with diepoxide crosslinkers accompanied by intramolecular and intermolecular chain transfer reactions

Our previous mechanistic discussion of the free‐radical crosslinking monoallyl/diallyl copolymerizations was extended to the cationic crosslinking monoepoxide/diepoxide copolymerizations, typically including 1,2‐epoxycyclohexane (ECH) as a monoepoxide and bis[3,4‐epoxycyclohexylmethyl] adipate (BECHMA) as a diepoxide crosslinker. In the cationic polymerization, oligomer is usually obtained because of the occurrence of characteristic chain‐forming reactions. Therefore, cationic crosslinking monoepoxide/diepoxide copolymerizations could be in the category of the network formation through free‐radical crosslinking monoallyl/diallyl copolymerizations. Thus, the gelation behavior was discussed by comparing the actual gel points with the theoretical ones; the greatly delayed gelation from theory was observed. Then, the resulting network polymer precursors (NPPs) were characterized by SEC‐MALLS‐viscometry to clarify the cationic crosslinking ECH/BECHMA copolymerization mechanism. Notably, the correlation lines of molecular weight versus elution volume were specific for the NPPs obtained at a high conversion close to the gel point as compared with those obtained by the free‐radical crosslinking monoallyl/diallyl copolymerization. This may be ascribed to the occurrence of intramolecular and intermolecular chain transfer reactions characteristic of cationic polymerization; the chain transfer reactions involve the intramolecular and intermolecular nucleophilic attack of ether oxygen or terminal hydroxyl oxygen in the NPPs to a terminal growing cation that leads to the formation of not only the loop‐ but also the crosslink‐structures containing NPPs, providing fragile ultrahigh‐molecular‐weight NPP in the SEC columns. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Observation of large Zeeman splitting in GaGdN/AlGaN ferromagnetic semiconductor double quantum well superlattices

Symmetric GaGdN/AlGaN (Gd concentration: 2%) and GaN/AlGaN double quantum well superlattices (DQW-SLs) were grown by radio-frequency plasma-assisted molecular-beam epitaxy on GaN (0001) templates. Atomic steps were observed on all the sample surfaces by atomic force microscope. X-ray diffraction θ/2θ scan curves exhibited well-defined satellite structures. Room temperature ferromagnetism was confirmed for the GaGdN/AlGaN DQW-SL samples by using alternating gradient magnetometer. Strong photoluminescence was observed from both GaGdN and GaN QWs at higher energy side of GaN excitonic peak. Magneto-photoluminescence spectra for GaGdN/AlGaN DQW-SL samples showed a large magnetic field dependence of the excitonic energy by applying a magnetic field up to 7 T. The observed strong redshift of excitonic PL indicated an enhancement of Zeeman splitting of the free carrier energy levels in magnetic GaGdN/AlGaN DQW-SL. Enhanced g-factor was estimated to be about 60 for GaGdN/AlGaN DQW-SL sample with QW thickness of 1 nm.     

Transfer efficiency in ballistic electron emission microscopy taking diffraction of emitted hot electrons into account

We have analyzed the transfer efficiency of ballistic electron emission microscopy (BEEM), taking the finite spot size of the emitted electron beam from scanning probes into account. Three-dimensional diffraction from an aperture at a surface-metal/air interface is introduced to model an effect caused by the finiteness of spot size. As a general trend, the diffraction decreases BEEM transfer efficiency. The diffraction effect increases as the spot size decreases and the air-gap distance increases. In a Au/GaAs sample, BEEM transfer efficiency markedly deteriorates down to 6% of the value derived from a conventional planar tunneling theory when a spot size of 0.2 nm, an air-gap distance of 0.6 nm, and an electron energy of 0.2 eV, measured from the bottom of the GaAs conduction band, are assumed. BEEM transfer efficiency is markedly dependent on the spot size of the emitted hot electron. This result indicates that the BEEM current depends on the spatial resolution of the scanning probe, that is, the condition of the tip apex.     

Determination of diltiazem hydrochloride enantiomers in dog plasma using chiral stationary-phase liquid chromatography

The separation and determination of d- and l-diltiazem hydrochloride in dog plasma by a two-column high-performance liquid chromatographic technique are described. Diltiazem hydrochloride and its metabolites were extracted from dog plasma and analyzed on a conventional column (Nucleosil 5C18) with a volatile buffer system. The column effluent of diltiazem hydrochloride was collected and evaporated. The enantiomeric ratio of the collected diltiazem was determined using a chiral column (Chiralcel OC). The method was accurate and sensitive.     

Synthesis of methylpyridine derivatives—XXXIIIChem. Pharm. Bull.25, 203 (1977).: Phosphonylation and chlorination of methylpyridine and 3-nitro-methylpyridine derivatives

Novel phosphonylation of the active Me group of pyridine derivatives is described.Reaction of 2 (and 4) -methylpyridine (3 and 5) with PCl₅ in POCl₃ gave 2 (and 4) -trichloromethylpyridine (4 and 6). Similarly, reaction of 4 (and 6) methyl-3-nitropyridine (7 and 9) afforded the corresponding trichloromethyl derivative (8 and 10). However, the similar reaction of 2-methyl-3-nitropyridine (11) gave dichloro-(3-nitro-2-pyridyl)-methylphosphonic dichloride (12).Mechanisms of the formation of these products are discussed.