Application of manganese(IV) dioxide microcolumn for determination and speciation of nitrite and nitrate using a flow injection analysis-flame atomic absorption spectrometry system

A flow injection (FI) method with flame atomic absorption spectrometry (FAAS) detection was developed for the determination and speciation of nitrite and nitrate in foodstuffs and wastewaters. The method is based on the oxidation of nitrite to nitrate using a manganese(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the MnO₂ solid phase reagent to Mn(II), which is measured by FAAS. The absorbance of Mn(II) are proportional to the concentration of nitrite in the samples. The injected sample volume was 400 μL with a sampling rate of analyses was 90 h⁻¹ with a relative standard deviation better than 1.0% in a repeatability study. Nitrate is reduced to nitrite in proposed FI-FAAS system using a copperized cadmium microcolumn and analyzed as nitrite. The calibration curves were linear up to 20 mg L⁻¹ and 30 mg L⁻¹ with a detection limit of 0.07 mg L⁻¹ and 0.14 mg L⁻¹ for nitrite and nitrate, respectively. The results exhibit no interference from the presence of large amounts of ions. The method was successfully applied to the speciation of nitrite and nitrate in spiked natural water, wastewater and foodstuff samples. The precision and accuracy of the proposed method were comparable to those of the reference spectrophotometric method.     

HEXAMETHYLDISILAZANE IN THE PRESENCE OF N,N′,N″,N‴-TETRAMETHYLTETRA-2,3-PYRIDINOPORPHYRAZINATO COPPER (II) IS A NEW,MILD AND HIGHLY EFFICIENT REAGENT FOR SILYLATION OF ALCOHOLS AND PHENOLS

Alcohols and phenols are protected with hexamethyldisilazane in the presence of N,N′,N′,N?-tetramethyletra-2,3-pyridinoporphyrazinato copper (II) in good-to-excellent yields at room temperature.     

In situ crystallization of ZnAl2O4/ZnO nanocomposite on alumina granule for photocatalytic purification of wastewater

Research on Chemical Intermediates - ZnAl2O4/ZnO nanocomposites with different ZnO (20, 30, and 40 mol%) concentrations and coated samples on supports were successfully prepared through...     

Sono-chemical synthesis and characterization of Fe3O4@mTiO2-GO nanocarriers for dual-targeted colon drug delivery

Research on Chemical Intermediates - In this study, a kind of magnetic Fe3O4@mTiO2-GO (where m was shorted mesoporous) hybrids with core–shell nano-structure for controlled dual targeted drug...     

Influence of non-metallic atoms on the absorption of amphetamines on B12N12 nano-cages

Structural Chemistry - Density functional theory (DFT) calculations at B3LYP/6-31+G(d) level were employed to investigate the influence of the non-metal encapsulation of the second row of the...     

Silica Chromate as a Novel Oxidizing Agent for the Oxidation of 1,4‐Dihydropyridines

Silica chromate easily converts 1,4‐dihydropyridines to their corresponding pyridines in the presence of NaHSO₄ · H₂O and wet SiO₂ in dichloromethane at room temperature in good to excellent yields.     

Preparation and characterization of cellulose-ZnO nanocomposite based on ionic liquid ([C4mim]Cl)

Cellulose-ZnO composite was achieved by microwave assisted dissolution of cellulose in ionic liquid 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl) followed by addition of premixed ground of Zn(CH₃COO)₂·2H₂O and NaOH. Surface characterization, optical property and thermal stability of nanocomposite were determined by X-ray diffraction, scanning electron microscopy (SEM), UV–Vis spectroscopy and thermo gravimetric analysis. XRD patterns showed the ZnO in polymer matrix has the wurtzite structure. Presence of zinc oxide nanoparticles and cellulose fibers in the composites were observed by SEM. Band-edge transition of zinc oxide in the nanocomposite occurs in lower wavelength than bulk zinc oxide. Thermal stability of nanocomposite was lower than regenerated cellulose due to catalyst behavior of zinc oxide nanoparticles in cellulose matrix.     

Crystal Structure of the Second Polymorph of Octaethylporphyrin Iron(III) with Monoanion 1,4-Phenyldicyanamide, [Fe(OEP)(DicydH)]

Abstract  

Molecular structure of the second polymorph of [Fe(OEP)(DicydH)], where OEP is the dianion of octaethylporphyrin and DicydH = monoanion of 1,4-phenyldicyanamide, was determined by single-crystal X-ray diffraction. Fe(III) atom is five-coordinate to four N atoms of the porphyrin ring and to one nitrogen atom of DicydH. The compound is characterized by an average Fe–N_p bond length of 2.057 ?. The Fe–N_ax bond distance is 1.969(6) ?. Crystal data: crystal system, orthorhombic, a = 15.048(2), b = 17.515(3), c = 29.440(4) ?, space group, Pcab, V = 7759(2) ?³, Z = 8.     

Synthesis and Characterization of Two New Organic Dyes for Dye-Sensitized Solar Cells

In the present study, two new organic dyes based on indigo were prepared and used as sensitizers in dye-sensitized solar cells. To this end, indoxyl was utilized as the electron-donor and acrylic acid and cyanoacrylic acid were used as the electron-acceptor anchoring groups. These dyes were purified and characterized by analytical techniques. Spectrophotometric evaluations of the prepared dyes in solution and on a nano-anatase-TiO₂ substrate were investigated. Additionally, oxidation potential measurements were also carried out. Finally, dye-sensitized solar cells were fabricated to determine the photovoltaic behavior and conversion efficiency of each dye.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Preparation of tetraheptylammonium iodide-iodine graphite-multiwall carbon nanotube paste electrode: electrocatalytic determination of ascorbic acid in pharmaceuticals and foods

The present work describes the construction of a new modified graphite-multiwall carbon nanotube paste electrode by casting the appropriate mixture of tetraheptylammonium iodide-iodine as a new modifier. The modified paste electrode was used for the determination of ascorbic acid (AA) in a phosphate buffer solution (pH 2.0). When compared to activated carbon, a graphite and multiwall carbon nanotube paste electrode containing a new modifier, the proposed modified paste electrode not only shifted the oxidation potential of AA towards a less-positive potential but also enhanced its oxidation peak current. Further, the oxidation of AA was highly stable at the modified paste electrode. The optimum analytical conditions were sought. The current response of AA increases linearly while increasing its concentration from 5.6 × 10(-5) to 1.2 × 10(-2) M with a correlation coefficient of 0.9991; the detection limit (3σ) was found to be of 3.6 × 10(-5) M. The present modified paste electrode was also successfully used for the determination of AA in the presence of common interference compounds. The present modified electrode was successfully demonstrated towards the determination of AA in pharmaceutical and food samples.