Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.     

Development of novel antioxidants: design,synthesis, and reactivity

We are attempting to develop novel synthetic antioxidants aimed at retarding the effects of free-radical induced cell damage. In this paper we discuss the design strategy and report the synthesis of seven novel antioxidants, including six catechols and a benzylic phenol. The bond dissociation enthalpy (BDE) for the most active (weakest) OH bond in each molecule was calculated by theoretical methods, as well as the BDE for the semiquinone radical. Reaction rates with the nitrogen-centered free radical DPPH(*) were measured in ethyl acetate. The log of k(DPPH) for bimolecular reaction correlated well with the primary BDE. The correlation between rate constants and calculated BDEs shows that the BDE is a good predictor of antioxidant activity with DPPH(*), suggesting that our design criteria are useful and that these compounds should undergo further testing in cell cultures and in animal models.     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

Quantum yield of the iodide-iodate chemical actinometer: dependence on wavelength and concentrations

The quantum yield (QY) of the iodide-iodate chemical actinometer (0.6 M KI-0.1 M KIO3) was determined for irradiation between 214 and 330 nm. The photoproduct, triiodide, was determined from the increase in absorbance at 352 nm, which together with a concomitant measurement of the UV fluence enabled the QY to be calculated. The QY at 254 nm was determined to be 0.73 +/- 0.02 when calibration was carried out against a National Institute of Standards and Technology traceable radiometer or photometric device. At wavelengths below 254 nm the QY increased slightly, leveling off at -0.80 +/- 0.05, whereas above 254 nm the QY decreases linearly with wavelength, reaching a value of 0.30 at 284 nm. In addition, the QY was measured at different iodide concentrations. There is a slight decrease in QY going from 0.6 to 0.15 M KI, whereas below 0.15 M KI the QY drops off sharply, decreasing to 0.23 by 0.006 M KI. Calibration of the QY was also done using potassium ferrioxalate actinometry to measure the irradiance. These results showed a 20% reduction in QY between 240 and 280 nm as compared with radiometry. This discrepancy suggests that the QY of the ferrioxalate actinometer in this region of the spectrum needs reexamination.     

On the efficiency of exchange in parallel tempering monte carlo simulations

We introduce the concept of effective fraction, defined as the expected probability that a configuration from the lowest index replica successfully reaches the highest index replica during a replica exchange Monte Carlo simulation. We then argue that the effective fraction represents an adequate measure of the quality of the sampling technique, as far as swapping is concerned. Under the hypothesis that the correlation between successive exchanges is negligible, we propose a technique for the computation of the effective fraction, a technique that relies solely on the values of the acceptance probabilities obtained at the end of the simulation. The effective fraction is then utilized for the study of the efficiency of a popular swapping scheme in the context of parallel tempering in the canonical ensemble. For large dimensional oscillators, we show that the swapping probability that minimizes the computational effort is 38.74%. By studying the parallel tempering swapping efficiency for a 13-atom Lennard-Jones cluster, we argue that the value of 38.74% remains roughly the optimal probability for most systems with continuous distributions that are likely to be encountered in practice.     

Dispersed fluorescence spectroscopy of jet-cooled HCF and DCF: Vibrational structure of the X 1A' state

We recorded dispersed fluorescence (DF) spectra following excitation of the pure bending levels 2(0) (n) and the combination states 1(0) (1)2(0) (n) and 2(0) (n)3(0) (1) in the A 1A"<--X 1A' system of HCF and DCF. Spectra were measured with a 0.3 m spectrograph equipped with a gated intensified charge coupled device (CCD) detector and obtained under jet-cooled conditions using a pulsed discharge source. The DF spectra reveal rich detail concerning the vibrational structure of the X state up to 10 000 cm(-1). For HCF, resonances among the nearly degenerate levels 1(1)2n, 2n+13(1), and 2n+2 produce a polyadlike structure in the spectrum, and the usual effective spectroscopic Hamiltonian (Dunham expansion) poorly reproduces the experimental term energies. In contrast, this Hamiltonian works well for the term energies of DCF. Density functional calculations of the ground state vibrational frequencies were performed; the results are in excellent agreement with the experimentally derived vibrational parameters. The search for perturbations involving the low-lying a 3A" state is described.     

Spectroscopic investigation of β-cyclodextrin -metoprolol tartrate inclusion complexes

Aqueous-solution complexes of β-cyclodextrin (β-CD) with metoprolol tartrate (MET) have been analysed with ¹H NMR and UV–vis spectroscopy. With ¹H NMR a [1:1] stoichiometry could be established for the β-CD-MET complex while its stability constant was determined with UV–vis spectroscopy. Powder diffraction data of a polycrystalline sample of the β-CD-MET complex show that a novel product has been formed, likely to be a β-CD-MET [1:1] inclusion complex. Also Hyperchem MM+ molecular-dynamics results suggest an inclusion complex and from ¹H NMR data it is inferred that probably the MET is docked in the CD with the formers methoxyethyl-benzene moiety in front. Mihaela Toma is Socrates/Erasmus student at UNED Madrid     

Micro- and nano-mechanical characterization of polyamide 11 and its composites containing cellulose nanofibers

Nanocomposites from polyamide 11 and dried cellulose nanofibers (CNs), 16–30 nm in thickness and 50–400 nm in length, were prepared via direct melt mixing and their micro- and nano-mechanical properties were studied. (PF) QNM (Quantitative Nanomechanical Mapping) method was used to map nanomechanical properties at the surface of polyamide 11 and nanocomposites. This new AFM method emphasized both the increased modulus in nanocomposites as compared to the matrix and the microstructure on different levels in polyamide 11 and its nanocomposites. PF QNM showed that their crystalline structure consists of bundles of lamellar stacks, 200–350 nm in width and 20–40 nm wide lamellar stacks. Moreover, PF QNM study emphasized higher structural order in nanocomposites with 3 and 5 wt.% CNs and lower in the nanocomposite with 8 wt.% CNs as compared to the reference. These observations were verified and are consistent with both crystallinity values determined by DSC and micro-mechanical test results. The oriented bundles of lamellar stacks, observed by PF QNM, could be considered as the main blocks determining high mechanical properties for the studied nanomaterials.     

Studies on the Electronic Transport Properties of some New Chelate Compounds Containing Siloxane

The temperature dependence of the electrical conductivity and the Seebeck coefficient of some new complex polymeric structures containing metal chelate sequences alternating with silane units were studied. The measurements were performed using thin films deposited from solution. The investigated polymers have interesting semiconducting characteristics. The correlations between these characteristics and the molecular structure of the respective polymers are discussed.     

Homogenization heat treatment and segregation analysis of equiaxed CMSX-4 superalloy for gas turbine components

Journal of Thermal Analysis and Calorimetry - Two new zinc(II) coordination compounds have been synthesized by the reaction of diazine-ring containing Schiff bases di(2-pyridyl) ketone...