Steering the Selectivity of Electrocatalytic Glucose Oxidation by the Pt Oxidation State

Electrocatalytic glucose oxidation can produce high value chemicals, but selectivity needs to be improved. Here we elucidate the role of the Pt oxidation state on the activity and selectivity of electrocatalytic oxidation of glucose with a new analytical approach, using high-pressure liquid chromatography and high-pressure anion exchange chromatography. It was found that the type of oxidation, i.e. dehydrogenation of primary and secondary alcohol groups or oxygen transfer to aldehyde groups, strongly depends on the Pt oxidation state. Pt⁰ has a 7-fold higher activity for dehydrogenation reactions than for oxidation reactions, while PtO_x is equally active for both reactions. Thus, Pt⁰ promotes glucose dialdehyde formation, while PtO_x favors gluconate formation. The successive dehydrogenation of gluconate is achieved selectively at the primary alcohol group by Pt⁰, while PtO_x also promotes the dehydrogenation of secondary alcohol groups, resulting in more complex reaction mixtures.     

Properties of Bangdiwala’s B

Advances in Data Analysis and Classification - Cohen’s kappa is the most widely used coefficient for assessing interobserver agreement on a nominal scale. An alternative coefficient for...     

A comparison of boundary element and finite element methods for modeling axisymmetric polymeric drop deformation

A modified boundary element method (BEM) and the DEVSS‐G finite element method (FEM) are applied to model the deformation of a polymeric drop suspended in another fluid subjected to start‐up uniaxial extensional flow. The effects of viscoelasticity, via the Oldroyd‐B differential model, are considered for the drop phase using both FEM and BEM and for both the drop and matrix phases using FEM. Where possible, results are compared with the linear deformation theory. Consistent predictions are obtained among the BEM, FEM, and linear theory for purely Newtonian systems and between FEM and linear theory for fully viscoelastic systems. FEM and BEM predictions for viscoelastic drops in a Newtonian matrix agree very well at short times but differ at longer times, with worst agreement occurring as critical flow strength is approached. This suggests that the dominant computational advantages held by the BEM over the FEM for this and similar problems may diminish or even disappear when the issue of accuracy is appropriately considered. Fully viscoelastic problems, which are only feasible using the FEM formulation, shed new insight on the role of viscoelasticity of the matrix fluid in drop deformation. Copyright © 2001 John Wiley & Sons, Ltd.     

Speciation of copper(II) complexes in an ionic liquid based on choline chloride and in choline chloride/water mixtures

A deep-eutectic solvent with the properties of an ionic liquid is formed when choline chloride is mixed with copper(II) chloride dihydrate in a 1:2 molar ratio. EXAFS and UV-vis-near-IR optical absorption spectroscopy have been used to compare the coordination sphere of the cupric ion in this ionic liquid with that of the cupric ion in solutions of 0.1 M of CuCl(2)·2H(2)O in solvents with varying molar ratios of choline chloride and water. The EXAFS data show that species with three chloride ions and one water molecule coordinated to the cupric ion as well as species with two chloride molecules and two water molecules coordinated to the cupric ion are present in the ionic liquid. On the other hand, a fully hydrated copper(II) ion is formed in an aqueous solution free of choline chloride, and the tetrachlorocuprate(II) complex forms in aqueous choline chloride solutions with more than 50 wt % of choline chloride. In solutions with between 0 and 50 wt % of choline chloride, mixed chloro-aquo complexes occur. Upon standing at room temperature, crystals of CuCl(2)·2H(2)O and of Cu(choline)Cl(3) formed in the ionic liquid. Cu(choline)Cl(3) is the first example of a choline cation coordinating to a transition-metal ion. Crystals of [choline](3)[CuCl(4)][Cl] and of [choline](4)[Cu(4)Cl(10)O] were also synthesized from molecular or ionic liquid solvents, and their crystal structures were determined.     

Structure and dynamics of water in nonionic reverse micelles: A combined time-resolved infrared and small angle x-ray scattering study

We study the structure and reorientation dynamics of nanometer-sized water droplets inside nonionic reverse micelles (water/Igepal-CO-520/cyclohexane) with time-resolved mid-infrared pump-probe spectroscopy and small angle x-ray scattering. In the time-resolved experiments, we probe the vibrational and orientational dynamics of the O-D bonds of dilute HDO:H(2)O mixtures in Igepal reverse micelles as a function of temperature and micelle size. We find that even small micelles contain a large fraction of water that reorients at the same rate as water in the bulk, which indicates that the polyethylene oxide chains of the surfactant do not penetrate into the water volume. We also observe that the confinement affects the reorientation dynamics of only the first hydration layer. From the temperature dependent surface-water dynamics, we estimate an activation enthalpy for reorientation of 45 ± 9 kJ mol(-1) (11?±?2 kcal mol(-1)), which is close to the activation energy of the reorientation of water molecules in ice.     

Ring expansion and hydrogen scrambling in the molecular ion of 3-methylthiophene

The ratio [M ? D]/{[M-D] + [M ? H]} in the 70 eV mass spectra of six deuterated 3-methylthiophenes has been determined. From these values the mole fractions of the molecular ions that lose hydrogen atoms specifically from the various positions of the molecule were calculated, as well as the mole fraction in which the hydrogen atoms are fully scrambled before hydrogen elimination. It appears that hydrogen atoms are mainly lost from a fully scrambled [C₅H₆S]⁺· ion and from the α-position of the original molecular ion. A deuterium isotope effect of 1·60 to 1·72 was calculated for the hydrogen elimination. The reaction was also studied at low electron energies. In order to determine the degree of scrambling in the [C₅H₅S]⁺ ions, some decomposition reactions of this ion were investigated.     

Precision study on capillary electrophoresis methods for metacycline

A CE method for metacycline (MTC) determination was investigated in an inter-laboratory experiment. Many problems were encountered in this study, most of which were related to the transfer of the method to different CE equipment. The reported problems could be classified into different categories: problems related to the precision, to the parameters in the protocol, and to the MTC peak shape. As the peak shape problem was partially responsible for the poor precision, a new CE method was developed in order to obtain a good MTC peak shape on all equipment. The precision of this new method for MTC determination was examined in an intermediate precision study, where the influence of the factors "time" and "equipment" was investigated. Although the new method could be transferred to different instruments, the precision remained poor mainly due to the contributions of the between-replicate and the between-injection variances.     

Screening approach for chiral separation of pharmaceuticals IV. Polar organic solvent chromatography

The aim of this work is to determine generic screening conditions and an initial simple separation strategy allowing the rapid separation of drug enantiomers in polar organic solvent chromatography (POSC). Four cellulose/amylose-based stationary phases were investigated in detail using two mobile phase basis solvents commonly applied in this mode, i.e. acetonitrile and methanol. Polar mode is interesting for use in purification of enantiomers. In a first step, the parameters potentially influencing the separation, such as addition of an alcohol to the polar organic solvent or the type of mobile phase additive(s), were examined by means of experimental designs. Afterwards, the factors found most important are investigated in more detail. Results showed that the cellulose- and amylose-based stationary phases have very broad and complementary enantiorecognition abilities in the POSC mode. The type of organic solvent for the mobile phase appeared to have a dramatic influence on the quality of the separation. Based on the results, a screening strategy was proposed. Enantioseparation was observed in more than 85% of the tested compounds and analysis times of last eluted peak were usually below 10 min.     

A chiroptical molecular switch with perfect stereocontrol

A modified version of the first generation unidirectional molecular motor showed >99% stereoselectivity in photo-induced isomerizations in both directions, thus functioning as a perfect chiroptical molecular switch.