Average heat transfer rates measured and numerically analyzed for combined convection of air in an inclined cylindrical enclosure due to both magnetic and gravitational fields

The average heat transfer rates were measured for natural convection of air in a shallow cylindrical enclosure heated from below and cooled from above in a bore space of an inclined super-conducting magnet. Depending on the location of the enclosure in the bore space, the angle of inclination and the strength of magnetic field, the net acceleration force could be arbitrarily varied and in this report, two locations where mostly axial magnetizing force prevails were selected. The average heat transfer rates varied with the angle of inclination due to the change in the total net acceleration of gravitational and magnetizing forces. Numerical computations were also carried out for the similar system under the combined magnetizing and gravitational forces and the computed average Nusselt numbers agreed mostly with the measured results. Detailed flow modes were graphically presented for the computed cases.     

Strong instability of solitary waves for nonlinear Klein–Gordon equations and generalized Boussinesq equations

We study here instability problems of standing waves for the nonlinear Klein–Gordon equations and solitary waves for the generalized Boussinesq equations. It is shown that those special wave solutions may be strongly unstable by blowup in finite time, depending on the range of the wave's frequency or the wave's speed of propagation and on the nonlinearity.     

Radiation sterilization of enzyme hybrids with biodegradable polymers

Ionizing radiations, which have already been utilized for the sterilization of medical supplies as well as gas fumigation, should be the final candidate to decontaminate “hybrid” biomaterials containing bio-active materials including enzymes because irradiation induces neither heat nor substances affecting the quality of the materials and our health. In order to check the feasibility of ⁶⁰Co-gamma rays on these materials, we selected commercial proteases including papain and bromelain hybridized with commercial activated chitosan beads and demonstrated that these enzyme-hybrids suspended in water showed the significant radiation durability of more than twice as much as free enzyme solution at 25-kGy irradiation. Enhanced thermal and storage stability of the enzyme hybrids were not affected by the same dose level of irradiation, either, indicating that commercial irradiation sterilization method is applicable to enzyme hybrids without modification.     

Secondary hypervalent I(III)...O interactions: synthesis and structure of hypervalent complexes of diphenyl-lambda3-iodanes with 18-crown-6

Reported here for the first time are the synthesis and characterization of supramolecular complexes between diaryl-lambda(3)-iodanes and 18-crown-6 (18C6). Slow evaporation of solvents afforded 1:1 and 2:1 complexes between Ph(2)IBF(4) and 18C6 as stable crystals, depending on the conditions. X-ray crystal structures of these complexes indicated that each iodine atom contacts with the three adjacent oxygen atoms of 18C6 through two hypervalent secondary bonding and a weak interaction. (1)H NMR analyses and CSI-MS spectra showed that, in dichloromethane solution, Ph(2)IBF(4) exclusively forms the 1:1 complex with 18C6 (binding constant K(a), 1.02 x 10(3) M(-)(1)). The binding constants decrease with the increased solvent donor ability (Gutmann's DN). Changing the heteroatom ligand from BF(4) to the less nucleophilic PF(6) and AsF(6) increased the binding constant by about six times. Substitution of an electron-withdrawing group onto the para position of Ph(2)IBF(4) tends to increase in the complex stability. A linear Hammett relationship (rho = 0.59) between log K(a) and sigma(p)(+) values of substituents indicates that the diaryl-lambda(3)-iodanes with electropositive iodine(III) interact more efficiently with 18C6. Decreased binding magnitude was measured with 15C5, dibenzo-18C6, dibenzo-21C7, and dibenzo-30C10.     

An alternate synthesis of 6-substituted-5-deazapteridines

A procedure for synthesis of 2,4-diamino-6-substituted-5-deazapteridines (pyrido[2,3-d]pyrimidines) is described. Condensation of 1-piperidino-1-propene with ethoxymethylenemalononitrile afforded an enamino malononitrile adduct, which when treated with ammonia yielded 2-amino-3-cyano-5-methylpyridine. Cyclization to 2,4-diamino-6-methyl-5-deazapteridine could be effected with guanidine. Similar condensation of piperidinopropene with ethyl methoxymethylenecyanoacetate followed by cyclization with hydroxylamine gave 2-amino-3-carbethoxy-6-methylpyridine 1-oxide. Reduction with phosphorus trichloride afforded the pyridine base, however, attempts to cyclize the amino ester to 2-amino-4-hydroxy-6-methyl-5-deazapteridine were unusccessful.     

A new stereoselective synthesis of 2-subsdtituted 1,3-bis(trimethylsilyl)propene derivatives and their conversion to cyclopentane and cyclohexane derivatives

Ester $\text{2}$ on treatment with sodium salt of sulfone or sulfoxide afforded 2-substituted 1,3-bis(trimethylsily)propene $\text{3}$ in good yield, from which cyclopentane and cyclohexane derivatives bearing a trimethylsilyl group in the molecules were synthesized.     

Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.     

A gravimetric method for the determination of oxygen in uranium oxides and ternary uranium oxides by addition of alkaline earth compounds

A simple gravimetric determination of oxygen in uranium oxides and ternary uranium oxides is described. In alkaline earth uranates which are formed by heating in air at 800–1100°C, uranium is in the hexavalent state over certain continuous ranges of alkaline earth-to-uranium ratios. Thus, if an alkaline earth uranate or a compound containing an alkaline earth element, e.g. MgO, is mixed with the oxide sample and heated in air under suitable conditions, oxygen can be determined from the weight change before and after the reaction. The standard deviation of the O:U ratio for a UO_2+x test sample is ±0.0008–0.001, if a correction is applied for atmospheric moisture absorbed during mixing.     

Influence of drawing and heat treatment on surface free energies of polyethylene terephthalate fibers

The surface free energies of polyethylene terepthalate fibers with different draw ratios were experimentally determined by contact angle measurements inn-alkane/water systems. The dispersive component of the surface free energy increased with increasing draw ratio, whereas the nondispersive one remained almost constant. After heat treatment, the dispersive surface free energy increased, but was reduced above 140°C. The nondispersive component increased by heat treatment at 190°C. The increases in the density and birefringence of the fibres due to the drawing and heat treatment suggested that the increase in the dispersive surface free energy was caused by the increase in the atomic density at the fiber surface due to drawing and heat treatment. ESCA results indicated that the increment in the nondispersive surface free energy due to heat treatment was caused by the addition of functional groups to the fiber surface due to heat treatment.     

The crystal structures of α- and β-CdUO4

The structural parameters of α- and β-CdUO₄ crystals are determined by X-ray powder diffraction technique. α-CdUO₄ is rhombohedral and cell parameters are a = 6.233(3) Å and α = 36.12(5)°. β-CdUO₄ crystallizes in a C-centered orthorhombic cell with a = 7.023(4), b = 6.849(3), c = 3.514 (2) Å. The space groups are $\text{R}\text{3}\text{m}$ for α-CdUO₄ and Cmmm for β-CdUO₄. α-CdUO₄: 1U in (000), 1Cd in ($\text{1}\text{2}\text{1}\text{2}\text{1}\text{2}$), 2O(1) in ±(uuu), 2O(2) in ±(vvv); u = 0.113, v = 0.350, Z = 1. β-CdUO₄: 2U in ($\text{000;}\text{1}\text{2}\text{1}\text{2}\text{0}$), 2Cd in ($\text{1}\text{2}\text{0}\text{1}\text{2}\text{; 0}\text{1}\text{2}\text{,}\text{1}\text{2}$), 4O(1) in ($\text{0, ±y, 0;}\text{1}\text{2}\text{,}\text{1}\text{2}\text{±y, 0}$), 4O(2) in ($\text{±x, 0,}\text{1}\text{2}\text{;}\text{1}\text{2}\text{±x,}\text{1}\text{2}\text{,}\text{1}\text{2}$); x = 0.159, y = 0.278, Z = 2. β-CdUO₄ contains collinear uranyl UO²⁺₂ groups with a UO(1) distance of 1.91 Å, located either along or parallel to the c axis whereas the UO(1) bond length in α-CdUO₄ is 1.98 Å which is longer than the usual uranyl bond length.