Determination of triazine pesticides and related compounds in environmental water by liquid chromatography-mass spectrometry.

A method for the determination of 5 triazine herbicides and 12 degradation products in environmental water samples using liquid chromatography-electrospray ionization mass spectrometry (LC/ESI/MS) has been developed. The pesticides in water were extracted with two types of solid phase: a styrene-divinylbenzene copolymer and a graphitized carbon black. Desorption solvents for the extracted compounds were acetone for the styrene-divinylbenzene copolymer and methanol for the graphitized carbon black. Overall recoveries from ground water and river water ranged from 73% to 111%. The limits of detection (LODs) were 0.2 to 28 ng l(-1). This method was applied to several ground water samples.     

Phase Conjugation in Saturable Absorbing Dye Films by Degenerate Four-Wave Mixing and Holographic Processes Using Nanosecond Pulse and CW Lasers

We report on the simultaneous generation of phase-conjugate signals by degenerate four-wave mixing (DFWM) and holographic processes using a nanosecond pulse and a CW lasers in polyvinyl alcohol (PVA) films doped with four kinds of saturable absorbing dyes. For the pulse laser, of the four kinds of dye-doped PVA films, the erythrosine B-doped PVA and uranine doped-PVA films generate PC signals only by the DFWM process, while the other dye-doped PVA films generate PC signals simultaneously by not only the DFWM process but also the holographic process. Especially, the safranin T-doped PVA film generates strong PC signals by the holographic process. In contrast, all of the dye-doped PVA films generate the two types of PC signals for the CW laser. The fading of dye molecules is found to result in the generation of the holographic component of PC signals which governs the temporal behavior of the total PC signals.     

Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Self-Restoration Properties of VWP Networks by Spare Wavelength Optimization

The self-restoration properties in VWP networks are investigated with optimization about spare wavelength by simulations. Rapid restoration can be achieved by selection of rerouting path with long delay and no delay-limitation for new routes.     

Optimal block length for Basic mode data transmission control procedure

This paper considers two models of BASIC mode data transmission: When we transmit data with length l

1. (1) data are divided into N blocks and each block is transmitted individually

2. (2) data are divided into N sub-blocks and all sub-blocks are transmitted together.

We derive total average transmission data lengths of each model and discuss optimal numbers N* and block length B* which minimize them. In model 1, the length of one block is approximately determined independently of l. It is shown in a numerical example that when l is large, model 2 is better than model 1.     

Angular momentum effect in prescission particle multiplicities for a light system by diffusion model

The effect of angular momentum on the competition between fission and particle emission during light system fission process was studied via fission diffusion model. The prescission particle multiplicities were found to increase with decreasing angular momentum. The experimental prescission proton and α particle multiplicities can be fitted for 10.6 MeV/nucleon ⁸⁴Kr(²⁷Al,binary fission) reaction with this model. Entrance channel effect found in [1] is proved to be angular momentum effect.     

Sorption of ethanesulfonic acid by nylon-6 containing various numbers of end groups

From the analysis of the permeation of ³⁵S labeled ethanesulfonic acid, through nylon-6 films sorption isotherms were obtained. The films are characterized by their largely different content of carboxyl and amino end groups. It was found that the shape of the isotherm depends on the molar ratio of the two end groups: an S-shape curve for the film containing the carboxyl end group larger than the amino end group and a Langmuir-type curve for the film containing comparable numbers of end groups. These results were explained by the McGregor-Harris theory in which the acid dissociation constants of the two end groups in nylon were estimated experimentally.     

Optically stimulated luminescence (OSL) and thermoluminescence (TL) measurements on red TL (RTL) quartz samples using a new automated OSL/TL measuring system

A new automated OSL/TL measuring system, equipped with a small X-ray irradiator applicable to a single-aliquot method, has been developed. To ensure cross check between OSL and RTL, the naturally accumulated doses evaluated with OSL and RTL measurements were compared. The results nearly agreed with each other, although the ages estimated from the experimental data were different from the real ages of Shin-Yakushiji temple because of the uncertainty of the annual dose. Nevertheless, it was concluded that the application of this system to the dating could be performed owing to uses of the luminescence measurements.