Accurate intensity calibration for low wavenumber (−150 to 150 cm−1) Raman spectroscopy using the pure rotational spectrum of N2

We report on an accurate intensity calibration method for low wavenumber Raman spectroscopy. It uses the rotational Raman spectrum of N₂. The intensity distributions in the rotational Raman spectra of diatomic molecules are theoretically well established. They can be used as primary intensity standards for intensity calibration. The intensity ratios of the Stokes and anti‐Stokes transitions originating from the same rotational levels are not affected by thermal population. Taking the effect of rotation–vibration interactions appropriately into account, we are able to calculate these intensity ratios theoretically. The comparison between the observed and calculated ratios of the N₂ pure rotational spectrum provides an accurate relative sensitivity curve (error ~5 × 10⁻⁴) in the wavenumber region of −150 to 150 cm⁻¹. We determine the temperature of water solely from the low wavenumber Raman spectra, using a thus calibrated spectrometer. The Raman temperature shows an excellent agreement with the thermocouple temperature, with only 0.5 K difference. The present calibration technique will be highly useful in many applications of low wavenumber quantitative Raman spectroscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Total synthesis of unsaturated imine venom alkaloids of Costa Rican ant by way of Schmidt reaction via allyl/pentadienyl cations

Total synthesis of α,β-, and α,β,γ,δ-unsaturated imine ant venom alkaloids is described. The labile two conjugated imine alkaloids were synthesized by late stage intramolecular Schmidt reaction via allyl and pentadienyl cation intermediates.     

Analytical aspects of cyanobacterial volatile organic compounds for investigation of their production behavior

In order to fully understand the role of volatile organic compounds (VOCs) under natural conditions, an adaptable analytical method was developed as the first step. β-Ionone, β-cyclocitral, 2-methyl-1-butanol and 3-methyl-1-butanol were simultaneously analyzed in addition to geosmin and 2-MIB using GC/MS with SPME. The slight modification of a known method allowed the simultaneous detection and quantification of these VOCs. The SIM of the 3-methyl-1-butanol was always accompanied by a shoulder peak, suggesting the presence of two compounds. In order to separate both compounds, the GC/MS conditions were optimized, and the additional peak was identified as 2-methyl-1-butanol by direct comparison of the authentic compound, indicating that the Microcystis strain always produces a mixture of 2-methyl-1-butanol and 3-methyl-1-butanol. Furthermore, it was found that 2-methyl-1-butanol and 3-methyl-1-butanol were predominant in the dissolved fractions. β-Cyclocitral was easily oxidized to provide the oxidation product, 2,6,6-trimethylcyclohexene-1-carboxylic acid, which causes the blue color formation of cyanobacteria as a consequence of acid stress. The intact acid could be satisfactorily analyzed using the usual GC/MS without derivatization.     

High concentration trans form unsaturated lipids detected in a HeLa cell by Raman microspectroscopy

High concentration trans form unsaturated lipids have been found in a HeLa cell by Raman microspectroscopy. Two CC stretch bands are observed simultaneously at 1669 cm⁻¹ (trans form) and at 1656 cm⁻¹ (cis form) in a Raman spectrum obtained from a small area (1 µm in diameter) in a HeLa cell. The intensity ratio 1669/1656 indicates that the concentration of the trans form is as high as that of the cis. It is demonstrated that Raman microspectroscopy provides a powerful and unique means for in situ and noninvasive structural characterization of unsaturated lipids in a living cell. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of hybrid microcapsules and application to self‐healing agent

It was tried to prepare hybrid microcapsules composed of porous inorganic particles and epoxy resin shell and to apply to the self‐healing agent. A water soluble imidazole of gelation promoting agent as the core material was microencapsulated in the porous inorganic particles, which were coated with epoxy resin. The porous inorganic particles were prepared with the interfacial reaction between sodium silicate and calcium ion in the (W/O) dispersion. In the experiment, the concentration of sodium silicate and the mixing speed to form the (W/O) dispersion were mainly changed. The porous inorganic particles were immersed in the aqueous solution dissolving imidazole and then, added in the corn oil dissolving epoxy resin to be microencapsulated with gelated epoxy resin. The hybrid microcapsules containing imidazole with the mean diameters from 200 to 400 µm were able to be prepared and to induce the gelation reaction of epoxy resin by breaking the hybrid microcapsule shell due to heating. Copyright © 2013 John Wiley & Sons, Ltd.     

A study on the reaction between chlorine trifluoride gas and glass-like carbon

The reaction between glass-like carbon (GC) and chlorine trifluoride (ClF₃) gas was investigated with weight measurements, surface analysis, and gas desorption measurements, where the ClF₃ gas is used for the in situ cleaning of tubes in silicon-related fabrication equipment. From Auger electron spectroscopy and X-ray photoelectron spectroscopy measurements, a carbon mono-fluoride, –(CF)_n–, film near the surface of GC is considered to be grown onto the GC surface above 400 °C by the chemical reaction with ClF₃, and this thickness of the fluoride film depends on the temperature. The grown fluoride film desorbs by annealing in a vacuum up to 600 °C. Although GC is apparently etched by ClF₃ over 600 °C, the etch rate of GC is much lower than that of SiC and quartz.