Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

Enantioselective spiro ene-carbocyclization of 1,6-enynes catalyzed by tropos rhodium(I) complex with skewphos ligand

A tropos rhodium(I) complex having skewphos ligand is shown to be a highly enantioselective catalyst for asymmetric ene-type carbocyclization of 1,6-enynes with tri-substituted olefins to control quaternary stereogenic centers or spiro-rings.     

Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method

Laser-induced backside wet etching (LIBWE) of silica glass plates was performed to fabricate an imprinting template for hot embossing in polymer substrates such as polystyrene and silicone resin. Well-defined inverse surface-micropatterns of gratings and grid arrays on the substrates were produced by the hot embossing using a surface-structured silica glass as the template. These results indicate that the LIBWE method allows us to generate robust glass molding tools that exhibit the inverse shapes of the intended microstructures. PACS 52.38.Mf; 68.47.Mn; 81.05.Kf; 81.05.Lg; 83.50.Uv     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Pressure response of Raman spectra of water and its implication to the change in hydrogen bond interaction

In situ Raman spectroscopic measurements of water in the region of OH vibration were conducted up to 0.4 GPa at 23 and 52 degrees C. The frequencies of the decomposed OH stretching bands initially decreased with increasing pressure, reached a minimum at 0.15 GPa and increased up to 0.3 GPa and then decreased, which corresponds to the variations of the strength of hydrogen bonding. This variation was observed at 23 degrees C, but not at 52 degrees C, which suggests a change in pressure dependence on the hydrogen bond interaction between these two temperatures. Based on the equilibration model between hydrogen-bonded and nonhydrogen-bonded molecules, the present experimental results indicate that the pressure variation of the viscosity depends on the ratio of hydrogen-bonded molecules, rather than the strength of hydrogen bonding between molecules.     

Preparation and physical properties of flame retardant acrylic resin containing nano-sized aluminum hydroxide

Poly(methylmethacrylate) (PMMA) shows high strength and transparency but is a flammable material. In this study, the surface of aluminum hydroxide was modified with methacrylate containing phosphoric acid moieties before dispersion in MMA, and organic-inorganic nano-hybrid materials were obtained by bulk polymerization in the presence of the surface-modified aluminum hydroxide. The resulting hybrid materials retained the high transparency of PMMA, with transparency values similar to that of pure PMMA. Moreover, the flame resistance of the hybrid materials was improved in comparison with that of pure PMMA, with depression of the horizontal burning rate becoming a maximum at an inorganic content of 3 wt%. These results suggest that the use of aluminum hydroxide surface-modified with phosphoric acid groups is an efficient method for obtaining good performance fire-resistant polymer materials.     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.     

Synthesis of 21-nor-22-oxa-1α,25-dihydroxyvitamin D3 derivatives in quest of a drug with low calcemic activity

Two 21-nor-22-oxa-1α,25-dihydroxyvitamin D₃ derivatives have been synthesized in quest of a drug with lower calcemic activity than Maxacalcitol, 22-oxa-1α,25-dihydroxyvitamin D₃, being used as antihyperparathyroidism and antipsoriatic drug. Of two 21-nor products obtained, the product carrying one carbon elongated side chain with diethylcarbinol moiety has been found to exhibit comparable differentiation-inducing activity to Maxacalcitol with much lower exhibition of calcemic activity.