Study on crystalline properties of Er-Si-O compounds in relation to Er-related 1.54 μm photoluminescence and electrical properties

Er-Si-O crystalline compounds, which exhibit superlattice structures and sharp and strong Er-related 1.54 μm photoluminescence (PL) spectra at room temperature have been formed by self-assembling growth mechanism. Oxidation of the starting materials which have Si and Er at an atomic ratio of 2:1 are prepared and then oxidation and succeeding high-temperature annealing in Ar above 1250 °C cause a self-assembled superlattice-structured Er-Si-O crystalline compounds. The control of the ratio of Si and Er, as well as the following oxidation and annealing processes, is found to be sensitive to the crystalline properties, PL spectra and electrical properties. In this study, Er-Si-O crystalline thin films are formed on Si substrates by sol-gel and MOMBE methods, and their crystalline properties such as crystalline orientation and concentration ratio of Er, Si and O are investigated. Crystalline Er-Si-O films of high orientation are successfully grown on Si(1 0 0) and its inclined surface. The PL and excitation spectra, fluorescence decay and the electrical properties are found to be strongly related to the crystalline properties. Excess O causes a broader 1.54 μm PL spectra, slower fluorescence decay, lower carrier-mediated excitation and higher resistivity. A precise control of O is found to be necessary to grow superlattice-structured Er-Si-O compounds, which are semiconducting and are excitable via carrier-mediated excitation mechanism.     

In situ observations of domain wall motion in Mn–Zn and Ni–Zn ferrites by Lorentz microscopy and electron holography

Domain wall motion in Mn–Zn and Ni–Zn ferrites with applied magnetic fields is investigated by in situ observations with Lorentz microscopy and electron holography. It is found that both Mn–Zn and Ni–Zn ferrites have a mean grain size of approximately 10 μm and several pores with sizes ranging from 0.2 to 1.1 μm. In situ observations by Lorentz microscopy with an applied magnetic field reveals that in Mn–Zn ferrite, the domain walls move easily across the grain boundary, while in Ni–Zn ferrite, the domain walls move along the grain boundary but are pinned at the grain boundary and pores. From in situ observations of Ni–Zn ferrite by electron holography, it is clarified that domain wall pinning at the grain boundary retards a sensitive increase in magnetic flux parallel to the applied field direction, which is considered to result in high hysteresis loss.     

Micro-phase sorbent extraction for trace analysis via in situ sorbent formation: application to the spectrophotometric determination of nitrite in environmental waters.

A micro-phase sorbent in situ formation from an aqueous solution was proposed for the sensitive spectrophotometric determination of nitrite in environmental waters. Nitrite in a 10 mL sample solution was converted into a cationic azo dye by the reaction with 4-trifluoromethylanilinium ion and N-1-naphthylethylenediammonium ion in an acidic medium. Addition of dodecylbenzenesulfonate ion caused the formation of a suspension of ion associate in the solution. Centrifugation of the solution led to the isolation of a liquid organic phase that extracted the azo dye at the bottom of the centrifuge tube. The volume of the new phase was ca. 5 microL. After the aqueous phase was discarded, the organic phase was dissolved with 1 mL of 2-methoxyethanol to measure the absorbance. Nitrogen as NO2- at concentrations from 1.5 to 30 microg L(-1) was determined with sufficient precision. When 0.2 mL of 2-methoxyethanol was applied to dissolve the organic phase, 0.3-4.8 microg NO2--N L(-1) was determined. The recovery tests for nitrite added to some river water and seawater were satisfactory. This method is very simple and rapid. It takes only 30 min from the dye formation to the measurement of the absorbance.     

Polymorphy in the stereostructure of periodic polymer backbones

We theoretically investigated the polymorphy of the stereostructures of a periodic polymer. Using the polymer's internal conformation parameters of bond lengths, bond angles, and internal rotation angles, we extended the mathematical treatment for designing polymer backbones. We considered those periodic polymers whose unit cell consists of one (m = 1), two (m = 2), or three (m = 3) kinds of atoms. Moreover, for these three types of polymers, we supposed two catenation types for the skeleton atoms; one is a “homorotatory” sequence and the other is a “heterorotatory” one. To specify the backbone's stereostructure, we introduced several conformation parameters such as the helical pitch number n, the translation distance d, and the inclination angle of the skeleton plane Θ. By combining these parameters, we can systematically understand the variety and the possible polymorphy in the stereostructure of a periodic polymer backbone. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2829–2849, 2003     

A Pseudo-Random Frequency Modulation Continuous Wave Coherent Lidar Using an Optical Field Correlation Detection Method

We propose a new detection method for a pseudo-random frequency modulation continuous wave (RM-CW) coherent lidar. The feature of this method is modulation of local beam with a time delayed pseudo-random sequence. Heterodyne detection and correlation detection between the received beam and the local beam are simultaneously carried out in an optical field. In the RM-CW coherent lidar using the optical field correlation detection method, the received equipment is greatly simplified. We carried out preliminary experiments and demonstrated that the new method is effective for detection of a CW coherent lidar.     

Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

The acid-catalyzed rearrangement of 1-N-allylindolines

Zinc chloride-catalyzed rearrangement of 1-N-allylindoline and 1-N-(2-methylallyl)indoline proceeds readily in refluxing xylene to give 7-allylindoline and 7-(2-methylallyl)indoline in 73% and 86% yields, respectively. The reaction of 1-N-2-butenylindoline and zinc chloride give rise to the mixture of 7-(1-methylallyl)indoline, 7-(cis- and trans-1-methyl-1-propenyl)indoline, and 7-(trans-2-butenyl)indoline. On the other hand, the similar reaction of 1-N-(3-methyl-2-butenyl)indoline with zinc chloride led to the formation of a mixture of 1,2,5,6-tetrahydro-4,4-dimethyl-4H-pyrrolo[3,2,1-ij]quinoline and 7-(3-methyl-2-butenyl)indoline.