The Effect of Boundary Conditions on Gas-phase Synthesised Silver Nanoparticles

We have prepared spherical non-agglomerated silver nanoparticles by an evaporation–condensation–dilution/cooling technique. Silver was evaporated from a crucible in a tubular flow reactor. A porous tube diluter was used to quench the carrier gas at the outlet of the reactor to enhance the formation of small particles and to suppress agglomeration and other particle growth mechanisms. The number size distribution of the prepared particles was measured with a differential mobility analyser–condensation nucleus counter combination and the size and the shape of the particles were analysed with transmission electron microscope. The system was modelled using a sectional aerosol dynamics computer code to estimate the importance of different aerosol processes. In all conditions the particles obtained were non-agglomerated and spherical. The mean particle diameter varied from 4 to 10-nm depending on boundary conditions. From the modelling studies it can be concluded that the nucleation rate is the most important parameter controlling the final particle size.     

The kink of cellular automaton rule 18 performs a random walk

We give an exact characterization of the movement of a single kink in the elementary cellular automaton Rule 18. It is a random walk with independent increments as well as independent delay times. Its statistical parameters are computed to confirm the earlier simulation results by Grassberger.     

Supercritical fluid extraction combined with solid phase extraction as sample preparation technique for the analysis of β-blockers in serum and urine

A method is developed for the determination of β-blockers in serum and urine at levels of 0.5 μg/mL. The technique uses a combination of solid phase extraction (SPE) with in situ derivatization and supercritical fluid extraction (SFE) with subsequent gas chromatography mass spectrometry. The optimization of the SFE step shows that a static extraction period can be eliminated. The method gives good linearity (r = 0.991–0.999) and repeatability in the concentration range of 0.5 to 5 μg/mL. Relative standard deviations for oxprenolol, propanolol and metoprolol were less than 5% in serum and 5–11% in urine. Received: 23 May 1997 / Revised: 28 July 1997 / Accepted: 5 August 1997     

Derivatives of pentamidine designed to target the Leishmania lipophosphoglycan

The Leishmania lipophosphoglycan (LPG) is the most abundant cell surface glycoconjugate of a family of infectious protozoa. Pentamidine, a common drug used in the treatment of Leishmania infections, has been modified with boronic acids so that it might bind more selectively to the phosphodisaccharide repeating unit of the LPG. This could serve to target the drug to the protozoan surface and increase its efficacy in vivo.     

Quantum-chemical gas-phase calculations on the protonation forms oftrans- andcis-urocanic acid

The neutral, cationic, and anionic structures of both prototropic tautomers oftrans- andcis-urocanic acid [(E)- and (Z)-3-(1H-imidazol-4(5)-yl)propenoic acid, respectively] were studied by using semiempirical andab initio gas-phase calculations. Potential energy surfaces of the structures were calculated by using the semiempirical AM1 method, and the geometries corresponding to global minima on these surfaces were optimized up to the MP2/6-31G^* level of theory. The calculated protonation forms of each urocanic acid isomer have a planar molecular structure due to a delocalized -electron system, and all of them prefer thes-trans conformation with respect to the bond between the imidazole and the propenoic acid moieties. Thecis-urocanic acid structures are stabilized by an intramolecular hydrogen bond. The chargedcis-urocanic acid isomers have a lower molecular energy than the correspondingtrans-isomers, whereas the neutral molecules have, after inclusion of thermodynamic corrections, approximately the same energy. The cationic urocanic acid structures have about 2500 kJ mol^–1 lower energy than the anionic ones and about 1000 kJ mol^–1 lower energy than the neutral ones. The nonzwitterionic forms of the neutral urocanic acid isomers have about 200 kJ mol^–1 lower energy than the zwitterionic ones. These energy differences are explained by the proton affinities of the imidazole and the propenoic acid moieties of the urocanic acid structures.     

Electronic spectroscopy of C2 in solid rare gas matrixes

Electronic spectroscopy of the C(2) molecule is investigated in Ar, Kr, and Xe matrixes in the 150-500 nm range. In the Ar matrix, the D ((1)Sigma(u)(+)) <-- ((1)Sigma(g)(+)) Mulliken band near 240 nm is the sole absorption in the UV range, whereas in the Kr matrix additional bands in the 188-209 nm range are assigned to the Kr(n)()(+)C(2)(-) <-- Kr(n)()C(2) charge-transfer absorptions. Because of the formation of a bound C(2)Xe species, the spectral observations in the Xe matrix differ dramatically from the lighter rare gases: the Mulliken band is absent and new bands appear near 300 and 423 nm. The latter is assigned to the forbidden B'((1)Sigma(g)(+)) <-- X ((1)Sigma(g)(+)) transition, but the origin of the former remains unclear. The spectral assignments are aided by electronic structure calculations at the MCSCF, CCSD(T), and BCCD(T) levels of theory and correlation consistent basis sets. A significant presence of multireference character of the C(2)Xe system was noted and a linear ground-state structure is predicted. The computational results contradict previous density functional studies on the same system.     

Structural Changes of Cellulose Crystallites Induced by Mercerisation in Different Solvent Systems; Determined by Powder X-ray Diffraction Method

The completeness of mercerisation can be evaluated by investigating the changes in the crystalline regions of cellulose from cellulose I (C-I) to cellulose II (C-II) by the X-ray powder diffraction method. Mercerisation experiments in four different solution systems: ethanol/water, acetone, DMSO and xylene, are reported. Also the effect of some additives, external pressure, treatment time and alkalisation temperature were studied. In two-phase solvent systems, structural changes of cellulose crystallites depended primarily on the distribution and solubility of sodium hydroxide in the solvent phases. The sodium hydroxide concentration in the hydrophilic phase must exceed 7–8 w/w-% before complete crystal change from C-I to C-II can occur. The precipitation of sodium hydroxide due to high concentration prevents the successful use of one-phase ethanol/water system in slurry process. On the contrary, the 2-propanol/water/sodium hydroxide system separates into two layers; to the water-rich lower layer and the 2-propanol-rich upper layer, where the sodium hydroxide remains mainly in the water-rich lower layer. This prevents the precipitation of sodium hydroxide and promotes the alkalisation of cellulose. Ammonium chloride and ammonium hydroxide clearly had a positive effect by promoting the crystal changes, however, the urea concentration used in this study was obviously too small. In the advantageous two-phase 2-propanol/water systems, the alkalisation time was only 15 min when the treatment temperature was kept between 0 and 10 °C. Reduced external pressure was found to have a small but still detectable positive effect on cellulose alkalisation while over-pressure prevented crystal changes.