Biphotonic recording effect of polarization gratings based on dye-doped liquid crystal films

This study investigates a holographic recording effect of biphotonic polarization gratings (BPGs) written on dye-doped liquid crystal (DDLC) films. One linearly polarized green light (λ_G = 514.5 nm) and a polarization-modulated interference pattern formed by two mutually coherent orthogonal (±45° with respect to the polarization of the green light) polarized red lights simultaneously excite the DDLC films to generate a BPG. The formation of BPGs depends primarily on the dichroism of the dye molecules and a sequence of mechanisms: photoisomerization, anisotropic adsorption and inhibition of dye adsorption. The cis-isomer absorbance-modulated distribution associated with the red polarization-modulation pattern induces the dye adsorption-modulated pattern, in turn, yielding the permanent BPG which generates a modulated twisted nematic (TN) structure pattern in the sample. It is found that each BPG is verified to be electrically switchable and thermally erasable. The switching time is in the order of milliseconds. Additionally, the recording time to form a BPG decreases with increasing intensity of the green pump beam.     

Determination of sulphonated azo dyes in food by ion-pair liquid chromatography with photodiode array and electrospray mass spectrometry detection

An ion-pair liquid chromatography method with on-line photodiode-array and electrospray mass spectrometry detection was developed to determine 10 commonly used sulphonated azo dyes (Tartrazine, Amaranth, New Coccine, Sunset Yellow FCF, Allura Red AC, Ponceau R, Ponceau 3R, Orange I, Orange II and Metanil Yellow) in food. A reversed phase C(18) column with gradient elution was utilized to separate these compounds. Triethylamine was added in the mobile phase as an ion-pair reagent for chromatographic separation. Photodiode-array detection was employed for quantitative determination and electrospray mass spectrometry was used for identification. Good linearity (0.05-10 ppm, r(2)=0.999) and detection limit (<0.01 ppm) were determined with 5 mul injection. In addition, precision and accuracy associated with this newly developed method will be presented. A liquid extraction method was also developed to extract these dyes from different foodstuffs. The application of this method was demonstrated by analyzing sulphonated azo dyes in soft drinks, fruit jam, and salted vegetables.     

Effect of surface condition on liquid crystal photoalignment by light-induced azo dye adsorption phenomena

The effect of surface condition on the photoalignment of light-induced methyl red (MR) adsorption phenomena on various substrates based on azo dye-doped liquid crystals is investigated. The results show that the polar surface energy determines the initiation of MR adsorption phenomena. The surface polarity energy of different substrates, which are modulated by oxygen plasma treatment (OPT), is further examined using the sessile drop method. The results also indicate that the uniformity and efficiency of MR adsorption can be enhanced by OPT. Light intensity influences the MR adsorption rate. The uniformity of MR adsorption onto various substrates is analysed via polarised optical microscopy.     

Preliminary Investigation of the Effect of Select Pollutants on Marine Phytoplankton Using Multidimensional Fluorescence Measurements

Abstract

The use of multidimensional fluorescence for detecting the effects of select pollutants on algal fluorescence and production is demonstrated. Multidimensional fluorescence is ideally suited to rapidly measure algal fluorescence generated by both chlorophyll a and accessory pigments, as well as any changes induced by pollutants. Laboratory cultured and natural algae samples from classes Chlorophyceae, Bacillariophyceae, and Cyanophyceae were exposed to substituted nitroaromatics and fluorescence spectra of the algae recorded. Notable spectroscopic changes and fluorescence quenching were observed. In addition, a novel method for rapidly preconcentrating dilute natural marine samples is described.     

Fluorescence studies of the interaction between chloramphenicol and nitrogen-doped graphene quantum dots and determination of chloramphenicol in chicken feed

Chloramphenicol (CAP) is a veterinary antibiotic that has been banned due to its severe side effects in humans. Through the application of manure, veterinary antibiotics can enter the soil, where they can be taken up by crops and vegetables and pose a potential health hazard to humans. Thus, it is highly desirable to develop a rapid and sensitive tool for on-site detection of CAP to ensure food safety and to control the abuse of antibiotics. To this end, nitrogen-doped graphene quantum dots (N-GQDs) were successfully prepared via microwave-assisted synthesis using citric acid and urea as carbon and nitrogen sources, respectively. Analytical results suggested that the interaction between N-GQDs and CAP could occurs via π-π stacking, which quenched N-GQD fluorescence. CAP spiked into chicken feed could be rapidly extracted with ethanol and quantified based on N-GQD fluorescence quenching without further separation. This method showed good recovery (97–102.6%), a low detection limit (1.8 ppm), and was not affected by interference from florfenicol, and thiamphenicol, legal substitute antibiotics. This method has excellent potential for determination of CAP in livestock feed and soil.     

Thin-disc piezoceramic ultrasonic motor. Part II: system construction and control

Design and performance evaluation of an ultrasonic motor was discussed in [Wen et al., Thin-disc piezoelectric ultrasonic motor. Part I: design and performance evaluation, Ultrasonics]. Higher precision position control of piezoceramic ultrasonic motor depends on mechanical design and servo control of a very precise and adequate metrology. This paper proposes the design of a driving circuit and controller to deal with non-linearities behavior in the model of piezoceramic-driving ultrasonic motor. The performance of the driver and the effectiveness of the proposed controller are demonstrated by command inputs of sinusoidal and step signals. For comparison purpose, the ultrasonic motor is controlled using two methods: i.e., proportional-integral-derivative (PID) and sliding-mode control (SMC). It was proven that SMC would compensate automatically for unmodeled behaviors such as piezoceramic non-linearities and mechanical stick-slip phenomena. Furthermore, SMC scheme has been successfully applied to position tracking to demonstrate the excellent robust performance in noise rejection.     

Detecting unstable periodic orbits embedded in chaotic systems using the simplex method

This paper proposes an approach for detecting unstable periodic orbits embedded in chaotic systems by using the simplex method. The simplex algorithm is easily implemented and does not require the derivatives of the function to be optimized. As a result, it is also applicable to chaotic systems with discontinuities or in which functions contain noise.     

Fluid forces on a square cylinder in oscillating flows with non‐zero‐mean velocities

The unsteady forces on a square cylinder in sinusoidally oscillating flows with non‐zero‐mean velocities are investigated numerically by using a weakly compressible‐flow method with three‐dimensional large eddy simulations. The major parameters in the analysis are Keulegan–Carpenter number (KC) and the ratio between the amplitude and the mean velocities of the approaching flow (A_R). By varying the values of KC and A_R the resulting drag and lift of the cylinders are analyzed systematically at two selected approaching‐flow attack angles (0 and 22.5^°). In the case of the non‐zero attack angle, results show that both the drag and lift histories can be adequately described by Morison equations. However, Morison equations fail to correctly describing the lift history as the attack angle is zero. In addition, when the ratio of A_R/KC is near the Strouhal number of the bluff‐body flow, the resulting drag is promoted due to the occurrence of resonance. Based on the results of systematic analyses, finally, the mean and inertia force coefficients at the two selected attack angles are presented as functions of KC and A_R based on the Morison relationships. Copyright © 2008 John Wiley & Sons, Ltd.     

Effective Synthesis of N‐Arylformamide from α‐Halo‐N‐arylacetamides

A convenient synthetic method for N‐arylformamide derivatives was successfully developed by reacting α‐iodo‐N‐arylacetamides with formamide. This method was applicable to α‐iodo‐N‐arylacetamide substrates bearing electron‐donating or electron‐withdrawing groups, N‐(benzo[d][1,3]dioxol‐5‐yl)‐2‐iodoacetamide, 2‐iodo‐N‐(pyridin‐2‐yl)acetamide, and 2‐iodo‐N‐(naphthalen‐4‐yl)acetamide to give the corresponding N‐arylformamides in moderate to excellent yields (65–94%). A plausible mechanism was proposed to account for the new transformation.     

Issues pertaining to the analysis of buprenorphine and its metabolites by gas chromatography–mass spectrometry

“Substitution therapy” and the use of buprenorphine (B) as an agent for treating heroin addiction continue to gain acceptance and have recently been implemented in Taiwan. Mature and widely utilized gas chromatography–mass spectrometry (GC–MS) technology can complement the low cost and highly sensitive immunoassay (IA) approach to facilitate the implementation of analytical tasks supporting compliance monitoring and pharmacokinetic/pharmacogenetic studies. Issues critical to GC–MS analysis of B and norbuprenorphine (NB) (free and as glucuronides), including extraction, hydrolysis, derivatization, and quantitation approaches were studied, followed by comparing the resulting data against those derived from IA and two types of liquid chromatography–tandem mass spectrometry (LC–MS/MS) methods. Commercial solid-phase extraction devices, highly effective for recovering all metabolites, may not be suitable for the analysis of free B and NB; acetyl-derivatization products exhibit the most favorable chromatographic, ion intensity, and cross-contribution characteristics for GC–MS analysis. Evaluation of IA, GC–MS, and LC–MS/MS data obtained in three laboratories has proven the 2-aliquot GC–MS protocol effective for the determination of free B and NB and their glucuronides.