Surface Engineering of Conjugated Polybenzothiadiazoles and Integration with Cobalt Oxides for Photocatalytic Water Oxidation

Conjugated polymers feature promising structure and properties for photocatalytic water splitting. Herein, a hydrolysis strategy was demonstrated to rationally modulate the surface hydrophilicity and band structures of conjugated poly-benzothiadiazoles. High hydrophilicity not only enhances the dispersions of polymeric solids in an aqueous solution but also reduces the absorption energy of water molecules. Besides, both theoretical and experimental results reveal that a more positive valence band potential is generated, which contributes to enhancing the photocatalytic water oxidation performance. Accordingly, the surface-modified conjugated polymers show largely promoted photocatalytic water oxidation activities by deposition of cobalt oxides as cocatalysts.     

高温退火工艺对直流反应磁控溅射制备蓝宝石基氮化铝模板的影响

采用直流反应磁控溅射与高温退火工艺大批量制备了膜厚为200 nm、400 nm及800 nm的2英寸蓝宝石基氮化铝模板,并对高温退火前后不同膜厚模板使用各种表征手段进行对比分析.结果 表明:采用磁控溅射制备膜厚为200 nm的模板经高温退火后晶体质量得到显著提升,退火前后整片(0002)面和(10-12)面高分辨率X射线衍射摇摆曲线半高宽分别从632 ～ 658 arcsec和2 580 ～2 734 arcsec下降至70.9 ～ 84.5 arcsec和273.6 ～ 341.6 arcsec;模板5 μm×5μm区域内均方根粗糙度小于1 nm;紫外波段260 ～280 nm吸收系数为14 ～20 cm-1;高温退火前后拉曼图谱E2(high)声子模特征峰半高宽从13.5 cm-1降至5.2 cm-1,峰位从656.6 cm-1移动至657.6 cm-1,表明氮化铝模板内的拉应力经高温退火后得到释放,接近无应力状态.     

Porphyrin-like porous nanomaterials as drug delivery systems for ibuprofen drug

In recent years, nanomaterial-based drug delivery carriers have become some of the most attractive to be studied. The purpose of this study is to investigate the interaction of C60 fullerene, carbon nanotube and graphene having porphyrin-like FeN4 clusters with a non-steroidal anti-inflammatory drug (ibuprofen) by means of the density functional theory. Results showed that the graphene with FeN4 clusters could remarkably increase the tendency of graphene for adsorption of ibuprofen drug. Also, our ultraviolet–visible results show that the electronic spectra of the complexes exhibit a blue shift toward lower wavelengths (higher energies). It was found that Ibp/FeN4-graphene had high chemical reactivity, which was important for binding of the drug onto the target site. In order to go further and gain insight into the binding features of considered systems with ibuprofen drug, the Atoms in Molecules analysis was performed. Our results determine the electrostatic features of the Ibp/FeN4-graphene bonding. Consequently, the results demonstrated that the FeN4-graphene could be used as potential carriers for the delivery of ibuprofen drug.     

A sensitive DNA biosensor based on the distance dependent quenching of Silica@Ru(bpy)32+-chitosan-GO electrochemiluminescence by Ferrocene@Gold nanoparticles

A sensitive electrochemiluminescence (ECL) biosensor for the specific DNA sequence of hepatitis C virus (HCV) was developed based on the efficient quenching effect of the ferrocene cluster functionalized gold nanoparticles (Fc@AuNPs) on the ECL of electrodeposited silica@Ru(bpy)₃²⁺-chitosan-graphene oxide nanocomposite (SiO₂@Ru−CS−GO). Graphene oxide (GO) can accelerate electron transfer rate, thus improving the ECL of Ru(bpy)₃²⁺ on electrode surface. The molecular beacons (MB) was fixed to SiO₂@Ru−CS−GO by glutaraldehyde (GA) using the Schiff reaction between amino groups of chitosan (CS) and MB. The ECL of SiO₂@Ru−CS−GO was depressed greatly by the Fc@AuNPs labelled at the end of MB, then, a stronger ECL was observed when the distance between Fc@AuNPs and SiO₂@Ru−CS−GO increased after the hybridization of target DNA with MB. Under optimum conditions, the restored ECL intensity increased linearly with the target DNA concentration in the range of 1.0×10⁻¹⁶∼1.0×10⁻¹⁰ mol ⋅ L⁻¹, and the limit of detection (LOD) is 1.4×10⁻¹⁷ mol ⋅ L⁻¹. The proposed method exhibits acceptable stability and reproducibility. In general, the constructed HCV biosensor can be used for the sensitive detection of HCV in human serum, suggesting potential application prospects in bioanalysis.     

Palladium and Ruthenium Dual-Single-Atom Sites on Porous Ionic Polymers for Acetylene Dialkoxycarbonylation: Synergetic Effects Stabilize the Active Site and Increase CO Adsorption

Heterogeneous single-metal-site catalysts usually suffer from poor stability, thereby limiting industrial applications. Dual Pd₁−Ru₁ single-atom-sites supported on porous ionic polymers (Pd₁−Ru₁/PIPs) were constructed using a wetness impregnation method. The two isolated metal species in the form of a binuclear complex were immobilized on the cationic framework of PIPs through ionic bonds. Compared to the single Pd- or Ru-site catalyst, the dual single-atom system exhibits higher activity with 98 % acetylene conversion and near 100 % selectivity to dialkoxycarbonylation products, as well as better cycling stability for ten cycles without obvious decay. Based on DFT calculations, it was found that the single-Ru site exhibited a strong CO adsorption energy of −1.6 eV, leading to an increase in the local CO concentration of the catalyst. Notably, the Pd₁−Ru₁/PIPs catalyst had a much lower energy barrier of 2.49 eV compared to 3.87 eV of Pd₁/PIPs for the rate-determining step. The synergetic effect between neighboring single sites Pd₁ and Ru₁ not only enhanced the overall activity, but also stabilized Pd^II active sites. The discovery of synergetic effects between single sites can deepen our understanding of single-site catalysts at the molecular level.     

A Microporous Hydrogen-Bonded Organic Framework Based on Hydrogen-Bonding Tetramers for Efficient Xe/Kr Separation

Hydrogen-bonded organic frameworks (HOFs) have been emerging as a new type of very promising microporous materials for gas separation and purification, but few HOFs structures constructed through hydrogen-bonding tetramers have been explored in this field. Herein, we report the first microporous HOF (termed as HOF-FJU-46) afforded by hydrogen-bonding tetramers with 4-fold interpenetrated diamond networks, which shows excellent chemical and thermal stability. What's more, activated HOF-FJU-46 exhibits the highest xenon (Xe) uptake of 2.51 mmol g⁻¹ and xenon/krypton (Kr) selectivity of 19.9 at the ambient condition among the reported HOFs up to date. Dynamic breakthrough tests confirmed the excellent Xe/Kr separation of HOF-FJU-46a, showing high Kr productivity (110 mL g⁻¹) and Xe uptake (1.29 mmol g⁻¹), as well as good recyclability. The single crystal X-ray diffraction and the molecular simulations revealed that the abundant accessible aromatic and pyrazole rings in the pore channels of HOF-FJU-46a can provide the multiple strong C−H⋅⋅⋅Xe interactions with Xe atoms.     

Effect of emulsification processes on the stability of Pickering emulsions stabilized by organomontmorillonites

In this paper, effect of emulsification processes on the properties of Pickering emulsions stabilized by organomontmorillonites (OMts) was studied. Results of micro-morphology and X-ray diffraction showed that the structure of OMt in emulsion depended on the emulsification processes and had an effect on the stability of emulsion. We propose a schematic diagram to reveal the relationship between emulsification processes-OMt laminates structure-stability of Pickering emulsion. In emulsion prepared by ultrasonic, OMt showed uniform dispersion, loose structure, and irregular crystalline. In emulsion prepared by vortex mixing method, OMt illustrated stacking and coagulation structure. In emulsion prepared by microwave method, OMt showed interacting structure and had a little interaction with oil/water interface, and thus the properties of emulsion prepared by microwave was weakly related to oil/water ratios. Emulsification processes had a profound effect on the structure of OMt and stability of Pickering emulsion, which can be used as a trigger to prepare emulsion for various applications.     

Synthesis of Fluorescent Carbon Dots and Their Application in Ascorbic Acid Detection

Water-soluble fluorescent carbon dots (CDs) were synthesized by a hydrothermal method using citric acid as the carbon source and ethylenediamine as the nitrogen source. The repeated and scale-up synthetic experiments were carried out to explore the feasibility of macroscopic preparation of CDs. The CDs/Fe³⁺ composite was prepared by the interaction of the CDs solution and Fe³⁺ solution. The optical properties, pH dependence and stability behavior of CDs or the CDs/Fe³⁺ composite were studied by ultraviolet spectroscopy and fluorescence spectroscopy. Following the principles of fluorescence quenching after the addition of Fe³⁺ and then the fluorescence recovery after the addition of asorbic acid, the fluorescence intensity of the carbon dots was measured at λex = 360 nm, λem = 460 nm. The content of ascorbic acid was calculated by quantitative analysis of the changing fluorescence intensity. The CDs/Fe³⁺ composite was applied to the determination of different active molecules, and it was found that the composite had specific recognition of ascorbic acid and showed an excellent linear relationship in 5.0–350.0 μmol·L⁻¹. Moreover, the detection limit was 3.11 μmol·L⁻¹. Satisfactory results were achieved when the method was applied to the ascorbic acid determination in jujube fruit. The fluorescent carbon dots composites prepared in this study may have broad application prospects in a rapid, sensitive and trace determination of ascorbic acid content during food processing.