Harmonically pump a femtosecond optical parametric oscillator to 1.13 GHz by a femtosecond 515 nm laser

We demonstrate a harmonically pumped femtosecond optical parametric oscillator(OPO)laser using a frequency-doubled mode-locked Yb:KGW laser at a repetition rate of 75.5 MHz as the pump laser.Based on a bismuth borate nonlinear crystal,repetition rates up to 1.13 GHz are realized,which is 15 times that of the pump laser.The signal wavelength is tunable from 700 nm to 887 nm.The maximum power of the signal is 207 m W at the central wavelength of 750 nm and the shortest pulse duration is 117 fs at 780 nm.The beam quality(M^2 factor)in the horizontal and vertical directions of the output beam are 1.077 and 1.141,respectively.     

The moire topography based on optical logic operation

The optical logic-operated moire,which is proposed on the basis of optical logicoperation,is a new method to obtain specific moire beat pattern.Its advantages lie in the ca-pability to select carrier-free,sharpened fringes with high contrast.The experimental methodand results of the application of the optical logic-operared moire in moire topography are pre-sented in this paper.     

全息散斑条纹的提取及图像处理

介绍了一种新的全息散斑条纹的提取方法.理论和实验表明:对全息散斑底片逐点再现时,两伴生亮斑条纹是全息散斑底片一级衍射光的杨氏干涉条纹,与中央的杨氏条纹是一致的,有较高的条纹对比度且没有背景光晕的影响.利用计算机数字图像处理技术对伴生散斑条纹进行处理,定量测试了受静载物体的面内位移.     

不同结构形态的NdOHCO3中Nd3+的增强电子拉曼光谱研究

利用X射线粉末衍射、场发射电子扫描显微术和透射电子显微术TEM,对不同方法制备的形态、颗粒大小不同的MdOHCO3进行钕离子的增强电子拉曼光谱和FT-IR光谱研究,发现结构形态不同的NdOHCO3由于配位环境变化,导致钕离子的电子拉曼光谱在2600～1600cm-1附近拉曼谱带的峰形、峰位和峰的数目产生显著变化.     

生物质裂解产物的制备及HPLC检测其成分的虚拟仿真实验开发

In order to improve university laboratory teaching and practical education under the background of information technology, as well as overcome the difficulty for practical training, develop a virtual simulation experiment platform for rapid pyrolysis of natal materials and high-performance liquid chromatographic (HPLC) detection of its components. The experiment integrates the actual operation process of the plant to produce cleaved products by rapid pyrolysis of biomass with HPLC detection. The virtual experiment is divided into biomass sample pretreatment, rapid biomass pyrolysis, bio-oil extraction, and HPLC determination of complex components, making the biomass cleavage workshop "real" through simulation. This virtual simulation experiment fully integrates the utilization of biomass resources and basic chemistry courses (such as organic chemistry, instrumental analysis, chemical engineering principles, etc.), which are widely involved in agricultural and forestry majors with advantageous characteristics value.     

Analytical time-dependent distributions for two common signaling systems

The chemical master equation (CME) in principle provides a method for quantifying the probabilistic behavior of any reaction network including signaling networks with time-varying reaction rates, but solving this equation is a great challenge. Here, we apply the Doi–Peliti formalism combined with both the Wei–Norman method and Lie algebra to analytically solve the CME. When this method is applied to two common signaling modules with time-varying reaction rates: a reversible binding motif and an irreversible modification motif, we successfully derive the analytical transient distribution for each motif, including the time-dependent joint and marginal distributions for all the reactive species. The stochastic simulations confirm the correctness of our analytical results. The method proposed here has broad applications in finding the time-evolutional distributions of biochemical networks with time-varying reaction rates.     

Optimization of mobile phase for the determination of Esomeprazole and related compounds and investigation of stress degradation by LC–MS

In this study, the objective was to investigate the degradation behavior of Esomeprazole under different recommended stress conditions according to International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use [1] by HPLC. Our research showed that the effect of mobile phase species on separation was significant for the determination of Esomeprazole and its related compounds. Successful separation of the drug from its related impurities and degradation products formed under different stress conditions was achieved using ammonium acetate buffer/ACN by a gradient elution. Compared with phosphate buffer/ACN, ammonium acetate buffer/ACN under same pH and gradient showed a great improvement in resolution due to the change of elution order. The drug was subjected to stress conditions including acidic, alkaline, oxidative, photolytic, and thermal conditions. Extensive degradation occurred in acidic and oxidative conditions, while mild degradation was observed in alkaline and photolytic conditions. Besides, it turned out the drug was extremely stable under thermal condition. The stability‐indicating LC–UV method was validated with respect to linearity, precision, accuracy, specificity, and robustness. The LC–MS method was also adopted for the characterization of degradation products. Based on the m/z values and fragmentation patterns, the degradation pathway of the drug has been proposed.     

高效液相色谱法结合一测多评法对隔山消发酵前后3种苯乙酮类化合物含量变化的分析

采用高效液相色谱法结合一测多评法测定了隔山消发酵前后2,4-二羟基苯乙酮、2,5-二羟基苯乙酮和白首乌二苯酮等3种苯乙酮类化合物的含量。分别制备发酵前后的隔山消样品溶液,色谱分析中采用Thermo C18色谱柱作为固定相,用不同比例的水(A)、乙腈(B)和甲醇(C)的混合液作为流动相进行梯度洗脱,达到上述3种组分的良好分离。采用二极管阵列检测器在相同的检测波长(265nm处)分别测定3种组分的峰面积。分别用一测多评法(QAMS)和外标法计算所测定组分的含量,结果表明两种计算方法所得结果相似性极高,据此认为在隔山消发酵前后的样品溶液中各组分的质量评价中采用QAMS是可行的。按上述方法分析了同一批隔山消样品12份,取其中6份经发酵处理,对所得结果的平均值进行了比较,未经发酵的样品溶液中2,4-二羟基苯乙酮的质量分数为0.208mg·g^-1、2,5-二羟基苯乙酮的质量分数为0.152mg·g^-1,与经发酵的样品溶液中的质量分数(2,4-二羟基苯乙酮的质量分数为0.235mg·g^-1、2,5-二羟基苯乙酮的质量分数为0.180mg·g^-1)相比呈升高趋势,而白首乌二苯酮的质量分数由未经发酵样品溶液中的0.678mg·g^-1下降为发酵样品溶液中的0.543mg·g^-1。此外,研究结果还表明,不同含量的2,5-二羟基苯乙酮和白首乌二苯酮相对于2,4-二羟基苯乙酮(参照物)的相对校正因子和相对保留时间基本相同。     

球形纤维素吸附剂对Cu~(2+)的吸附动力学与热力学研究

以离子液体([Bmim]Cl)为反应介质,丙烯酸为单体,对纤维素进行均相接枝共聚,并采用油包水反相悬浮技术制得球形纤维素吸附剂。采用静态吸附实验方法研究了该吸附剂对水溶液中Cu2+的吸附性能,包括各种因素(溶液pH值,溶液初始浓度,吸附时间,吸附温度)对吸附效果的影响。研究结果表明,适当提高溶液pH值,增加溶液初始浓度,以及延长吸附时间都有利于改善吸附效果;球形纤维素吸附剂对Cu2+的吸附符合Langmuir吸附等温式,吸附过程是自发的放热过程;吸附剂对Cu2+的吸附符合二级吸附动力学模型,吸附过程由膜扩散和颗粒内扩散联合控制。球形纤维素吸附剂对Cu2+的具有很好的吸附性并具有良好的再生性能,可以循环使用。