Hamiltonian models of interacting fermion fields in quantum field theory

We consider Hamiltonian models representing an arbitrary number of spin 1 / 2 fermion quantum fields interacting through arbitrary processes of creation or annihilation of particles. The fields may be massive or massless. The interaction form factors are supposed to satisfy some regularity conditions in both position and momentum space. Without any restriction on the strength of the interaction, we prove that the Hamiltonian identifies to a self-adjoint operator on a tensor product of antisymmetric Fock spaces and we establish the existence of a ground state. Our results rely on new interpolated \(N_\tau \) estimates. They apply to models arising from the Fermi theory of weak interactions, with ultraviolet and spatial cutoffs.

     

Recent developments concerning the investigation of exocytosis with amperometry

In this article, we have summarized the recent important results related to the electrochemical detection of vesicular exocytosis by amperometry with microelectrodes over the past three years. In this fascinating scientific field that began 40 years ago, the historical carbon fiber amperometry method still continues to be used to address biological questions by the pioneered groups of the field but also by other research groups thus showing this has become an indispensable routine technique for analyzing exocytosis. Furthermore, new methodologies (coupling with fluorescence, use of nanoelectrodes, microarrays) have blossomed and demonstrated how new analytical methods could be built to push back the limits of the initial technique.     

Expanded Mercaptocalixarenes: A New Kind of Macrocyclic Ligands for Stabilization of Polynuclear Thiolate Clusters

The syntheses and properties of expanded 4-tert-butyl-mercaptocalix[4]arenes, in which the methylene linkers are replaced by −CH₂NRCH₂− or −CH₂NRCH₂− and −CH₂NRCH₂CH₂CH₂NRCH₂− units, are described. The new macrocycles were obtained in a step-wise manner, utilizing fully protected, i. e. S-alkylated, derivatives of the oxidation-sensitive thiophenols in the cyclisation steps. Reductive cleavage of the macrobicyclic or macrotricyclic intermediates ( 6 , 7 , 11 ) afforded the free thiophenols (H₄ 8 , H₄ 9 , and H₄ 12 ) in preparative yields as their hydrochloride salts. The protected proligands can exist in two conformations, resembling the “cone” and “1,3-alternate” conformations found for the parent calix[4]arenes. The free macrocycles do not show conformational isomerism, but are readily oxidized forming intramolecular disulfide linkages. Preliminary complexation experiments show that these expanded mercaptocalixarenes can serve as supporting ligands for tetranuclear thiolato clusters.     

A fluidic-muscle driven force-controlled parallel platform for physical simulation of virtual spatial force-displacement laws

Described in this paper is a six-legged Stewart-Gough parallel platform driven by a relatively new type of fluidic muscles. The advantage of the platform is that it is virtually free of stick-slip effects. Thus, the device is well-suited for fine-tuned force control and for physical simulation of virtual force-displacement laws. The legs of the platform are of type RRPS and are equipped with a coaxial coil spring and a fluidic muscle providing push and pull forces. Each leg is equipped with a force sensor, a pressure sensor, and a magnetostrictive position encoder. The control for the platform consists of six control loops for the six operated actuators with model-based force control comprising individual gas models as well as the rubber nonlinearities for each leg. The control law also includes the gas flow in the proportional directional control valve in 3/3-way function. The present paper describes the basic architecture of the platform, the dynamic models, as well as testbed results for the existing fluidic-muscle parallel platform DynaHex. It is shown that the presented control scheme leads to a stable force control of the platform for quasi-static motion. As an application, the device will be employed in fields of biomechanics, as well as in general environments requiring physical simulation.     

Instrumental Dependent Dissociations of n-Propyl/Isopropyl Phosphonate Isomers: Evaluation of Resonant and Non-Resonant Vibrational Activations

Structural elucidation and distinction of isomeric neurotoxic agents remain a challenge. Tandem mass spectrometry can be used for this purpose in particular if a “diagnostic” product ion is observed. Different vibrational activation methods were investigated to enhance formation of diagnostic ions through consecutive processes from O,O-dialkyl alkylphosphonates. Resonant and non-resonant collisional activation and infrared multiphoton dissociation (IRMPD) were used with different mass spectrometers: a hybrid quadrupole Fourier transform ion cyclotron resonance (Qh-FTICR) and a hybrid linear ion trap-Orbitrap (LTQ/Orbitrap). Double resonance (DR) experiments, in ion cyclotron resonance (ICR) cell, were used for unambiguous determination of direct intermediate yielding diagnostic ions. From protonated n-propyl and isopropyl O-O-dialkyl-phosphonates, a diagnostic m/z 83 ion characterizes the isopropyl isomer. This ion is produced through consecutive dissociation processes. Conditions to favor its formation and observation using different activation methods were investigated. It was shown that with the LTQ, consecutive experimental steps of isolation/activation with modified trapping conditions limiting the low mass cut off (LMCO) effect were required, whereas with FT-ICR by CID and IRMPD the diagnostic ion detection was provided only by one activation step. Among the different investigated activation methods it was shown that by using low-pressure conditions or using non-resonant methods, efficient and fast differentiation of isomeric neurotoxic agents was obtained. This work constitutes a unique comparison of different activation modes for distinction of isomers showing the instrumental dependence characteristic of the consecutive processes. New insights in the dissociation pathways were obtained based on double-resonance IRMPD experiments using a FT-ICR instrument with limitation at low mass values.

Critical Evaluation of Kinetic Method Measurements: Possible Origins of Nonlinear Effects

The kinetic method is a widely used approach for the determination of thermochemical data such as proton affinities (PA) and gas-phase acidities (ΔH° _acid ). These data are easily obtained from decompositions of noncovalent heterodimers if care is taken in the choice of the method, references used, and experimental conditions. Previously, several papers have focused on theoretical considerations concerning the nature of the references. Few investigations have been devoted to conditions required to validate the quality of the experimental results. In the present work, we are interested in rationalizing the origin of nonlinear effects that can be obtained with the kinetic method. It is shown that such deviations result from intrinsic properties of the systems investigated but can also be enhanced by artifacts resulting from experimental issues. Overall, it is shown that orthogonal distance regression (ODR) analysis of kinetic method data provides the optimum way of acquiring accurate thermodynamic information.      

Incompatible reaction evaluation and accident investigation of various acids in chemical industries

This article covers the incompatible properties of nitric acid (HNO₃) with formic acid (CH₂O₂), and more generally with various acids such as sulfuric acid (H₂SO₄), hydrochloric acid (HCl), and acetic acid (C₂H₄O₂). Differential scanning calorimetry (DSC) was employed to determine the thermal hazard such as heat of decomposition (ΔH _d), exothermic onset temperature (T ₀), etc., in various acids. T ₀ of HNO₃ and CH₂O₂ were determined as 50 °C using DSC. Thus it has been observed that HNO₃ mixed with CH₂O₂ should be prohibited during transportation, storage, and use. And more generally, process safety engineers and operator must take care to handle tanker and storage tank of typical acids in the transportation, storage, and manufacturing process. It is clear that there exists a need to follow and enforce in the chemical industries safety data sheets, globally harmonized system of classification and labeling of chemicals of United Nations (UN), education of safety and health, emergency response system, and process safety management. It is the aim of the present study concerning HNO₃ with various acids.     

Fluoroalkyl Radical Generation by Homolytic Bond Dissociation in Pentacarbonylmanganese Derivatives

Thermal decarbonylation of the acyl compounds [Mn(CO)₅(COR_F)] (R_F=CF₃, CHF₂, CH₂CF₃, CF₂CH₃) yielded the corresponding alkyl derivatives [Mn(CO)₅(R_F)], some of which have not been previously reported. The compounds were fully characterized by analytical and spectroscopic methods and by several single-crystal X-ray diffraction studies. The solution-phase IR characterization in the CO stretching region, with the assistance of DFT calculations, has allowed the assignment of several weak bands to vibrations of the [Mn(¹²CO)₄(eq-¹³CO)(R_F)] and [Mn(¹²CO)₄(ax-¹³CO)(R_F)] isotopomers and a ranking of the R_F donor power in the order CF₃<CHF₂<CH₂CF₃≈CF₂CH₃. The homolytic Mn−R_F bond cleavage in [Mn(CO)₅(R_F)] at various temperatures under saturation conditions with trapping of the generated R_F radicals by excess tris(trimethylsilyl)silane yielded activation parameters ΔH^≠ and ΔS^≠ that are believed to represent close estimates of the homolytic bond dissociation thermodynamic parameters. These values are in close agreement with those calculated in a recent DFT study (J. Organomet. Chem. 2018 , 864, 12–18). The ability of these complexes to undergo homolytic Mn−R_F bond cleavage was further demonstrated by the observation that [Mn(CO)₅(CF₃)] (the compound with the strongest Mn−R_F bond) initiated the radical polymerization of vinylidene fluoride (CH₂=CF₂) to produce poly(vinylidene fluoride) in good yields by either thermal (100 °C) or photochemical (UV or visible light) activation.