Preconcentration of trace environmental plutonium from iron oxide matrix using DIPEX® extractant

This paper summarizes a new method for preconcentration of rusty metal samples using DIPEX^® Actinide Resin from Eichrom Technologies prior to analysis for trace environmental actinides. This method allows for preconcentration of actinides for which the existing lanthanum coprecipitation method is ill-suited. The new and existing methods were shown to provide comparable results for plutonium analysis. Performance was compared for both lab-prepared controls and environmental samples. Using actinide resin, a mean ²³⁸Pu activity of 46 ± 13 % mBq (2σ) was measured, while ²³⁸Pu activity of 40 ± 6 % mBq (2σ) was measured using lanthanum coprecipitation. Small quantities of ^239+240Pu, likely attributable to fallout, were also detected.     

Acrylonitrile Copolymerization. VIII. Radical Determination by the Spin-Trapping Technique

The technique of spin trapping of polymer radicals by 2-methyl-2-nitrosopropane has been applied to the study of acrylonitrile copolymerization. Provided the concentration of the spin trapping agent is kept low, and the samples are kept at low temperature during storage before obtaining the ESR spectra, quantitative studies of styrene-acrylonitrile copolymerization are possible. However, the spin-trapping reaction is a competitive one, and the trapping efficiency is dependent on the reactivity of the radicals present. In the case of acrylonitrile copolymerization with either vinyl chloride or vinyl acetate, these two last radicals are trapped preferentially. Furthermore, the cyclization reaction observed with many acrylonitrile copolymerization is nearly eliminated in the presence of the spin-trapping agent.     

Morphology of actinide-rich particles released from the BOMARC accident and collected from soil post remediation

The physical, chemical, and radiological characteristics of material released to the environment from accidents involving nuclear weapon components are dependent upon many factors, especially the manner in which the material is released and delivered to the environment. These characteristics will also be influenced by physical and chemical effects associated with weathering if the material remains exposed to the environment for a long period of time. This study evaluates the morphological characteristics of particles released to the environment as a result of the 1960 BOMARC incident and compares these characteristics to those described following similar incidents at Thule, Greenland (1968) and Palomares, Spain (1966). Each of these incidents involved unique circumstances and conditions that distributed actinide-rich particles to the environment with a range of distinctive morphological characteristics. Morphological and surface elemental analyses were conducted on a set of discrete particles isolated from samples of post-remediated soil collected at McGuire Air Force Base, the site of the BOMARC incident. Scanning electron microscopy and complimentary energy dispersive X-ray spectroscopy were used to perform the analyses. Non-destructive analysis of uranium and plutonium contained in each particle was measured using high-resolution gamma spectrometry. Unique characteristics of the BOMARC samples include some particles exhibiting a smooth, crystalline texture and varying elemental surface distribution of uranium and plutonium, dependent on the particle’s morphology.     

Fabrication and characterization of an irradiation facility for large-sample geometry

An irradiation facility consisting of a modified beam port shielding plug has been designed, fabricated built and characterized for use in irradiating non-standard sample geometries. The shielding plug features a graphite moderator at the core end with a hole, or “well” drilled of sufficient diameter and depth to accommodate an eight ounce (227 gram) sample bottle. Added shielding behind the graphite consists of castable neutron- and -gamma-ray shielding. The modified shielding plug can be removed relatively quickly from its irradiation position to minimize personnel exposures. It is mounted in close proximity to the Ohio State University Research Reactor reactor core to allow performance of high-sensitivity neutron activation analysis studies. Using the SAND-II unfolding code, the energy-dependent neutron flux has been measured in the sample irradiation position. When operating at 100 % power, the total flux is 3.9 × 10¹² n/cm²/s. Of this, 55 % is thermal (<0.5 eV), 23 % is epithermal (>0.5 eV, <0.5 MeV), and 22 % is “fast” (>0.5 MeV). This makes the facility suitable for neutron activation studies. Recently it has been used for irradiation of filter papers collected in a study of particulate air pollution in the form of atmospheric particulate matter in an urban environment.     

Über einige gemischte Äther des Resorcins

Ohne Zusammenfassung     

Iterative solving of variational inclusions under Wijsman perturbations

We prove that the metric regularity of set-valued mappings is stable under some Wijsman-type perturbations. Then, we solve a variational inclusion viewed as a limit-problem using assumptions on a sequence of associated problems. Finally, we apply our results to classical methods for solving variational inclusions.      

Detitanation of MgCl2‐supported Ziegler‐Natta catalysts for the study of active sites organization

Thermal treatments under vacuum of conventional supported Ziegler‐Natta precatalysts (MgCl₂/TiCl₄/Dibutylphthalate) were conducted to gradually remove titanium to modify the active sites distribution. Only limited detitanations of precatalysts were achieved paying attention not to chemically alter the internal donor (T < 150 °C). Used in combination with the required cocatalyst and external donor in the propylene slurry polymerization, the modified precatalysts exhibited a drop of activity versus decreasing titanium content but the distributed polymer properties are almost not affected (a slight narrowing of molecular weight distribution was observed). After a titanium chloride secondary impregnation (possibly done in presence of an additional Lewis base), activity resumed but polymer properties are once again unchanged. These findings highlight the difficulty to separate the different families of active sites and lead us to propose a cluster organization of titanium active sites. Active sites are composed of titanium clusters having a size distribution at the precatalyst surface, possessing a critical operating size and operating collectively in polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5461–5470, 2008     

Identification of the Givental Formula with the Spectral Curve Topological Recursion Procedure

We identify the Givental formula for the ancestor formal Gromov–Witten potential with a version of the topological recursion procedure for a collection of isolated local germs of the spectral curve. As an application we prove a conjecture of Norbury and Scott on the reconstruction of the stationary sector of the Gromov–Witten potential of ${\mathbb{C}{\rm P}^1}$ via a particular spectral curve.