On a class of new and practical performance indexes for approximation of fold bifurcations of nonlinear power flow equations

Efficient measurement of the performance index (the distance of a loading parameter from the voltage collapse point) is one of the key problems in power system operations and planning and such an index indicates the severity of a power system with regard to voltage collapse. There exist many interesting methods and ideas to compute this index. However, some successful methods are not yet mathematically justified while other mathematically sound methods are often proposed directly based on the bifurcation theory and they require the initial stationary state to be too close to the unknown turning point to make the underlying methods practical.This paper first gives a survey of several popular methods for estimating the fold bifurcation point including the continuation methods, bifurcation methods and the test function methods (Seydel's direct solution methods, the tangent vector methods and the reduced Jacobian method) and discuss their relative advantages and problems. Test functions are usually based on scaling of the determinant of the Jacobian matrix and it is generally not clear how to determine the behaviour of such functions. As the underlying nonlinear equations are of a particular type, this allows us to do a new analysis of the determinants of the Jacobian and its submatrices in this paper. Following the analysis, we demonstrate how to construct a class of test functions with a predictable analytical behaviour so that a suitable index can be produced. Finally, examples of two test functions from this class are proposed. For several standard IEEE test systems, promising numerical results have been achieved.     

LAXS investigation of finger phantoms

Osteoporosis is a bone condition that is caused mainly by the degradation of trabecular and cortical bone resulting in the decrease of bone strength and eventually leads to bone fracture. A low angle X-ray scattering (LAXS) system that uses mainly the coherent scattering process for the characterisation of materials was constructed to study such bone conditions. Several finger phantoms were fabricated to simulate bone of varying densities. The LAXS method was able to identify the changes in bone density quite well by comparing energy dispersive X-ray diffraction patterns as well as the angular patterns. Quantitative information can be extracted from such patterns that relate to bone loss. Signature patterns at low exposure times were produced in order to reduce the dose received with reasonable identification power but at slightly higher statistical errors compared with long exposure patterns. Use of other parameters to increase the sensitivity was attempted.     

One-carbon homologation of carboxylic acids via BtCH(2)TMS: a safe alternative to the Arndt--Eistert reaction

Carboxylic acids are converted into the corresponding homologated acids or esters, using easily available 1-(trimethylsilylmethyl)benzotriazole (1) as a one-carbon synthon. The effectiveness of the reaction has been investigated on six aryl and seven alkyl carboxylic acids.     

Spectrophotometric determination of ciprofloxacin in pure form and in tablets through charge-transfer complexation reactions

Three simple, quick and sensitive spectrophotometric methods are described for the determination of ciprofloxacin. The methods are based on the reaction of this drug as ann-electron donor with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), 7,7,8,8,-tetracyanoquinodimethane (TCNQ) andp-chloranil (CL) as -acceptors to give highly coloured complex species. The coloured products are quantitated spectrophotometrically at 460, 843 and 550 nm for DDQ, TCNQ and CL, respectively. Optimization of the different experimental conditions is described. Beer's law is obeyed in the concentration ranges 5–50, 1.5–15 and 20–200 g ml^–1 ciprofloxacin, but the concentration ranges for best accuracy are 10–48, 2.5–15 and 35– 195 g ml^–1 of drug for DDQ, TCNQ and CL, respectively. The relative standard deviations are less than 1.5%. Applications of the suggested methods to ciprofloxacin tablets are presented and compared with the USP method. The stability constants of the 11 DDQ and CL complexes were 1.086 × 10⁴ and 2.581 × 10⁴ lmol^–1, respectively, whereas for the 12 TCNQ complex it was 3.62 × 10⁸1. mol^–1.     

Reaction of Cα,O-dilithiooximes with functionalized carbonyl compounds. Part 2 . Reaction with α-chloroketones and α,β-unsaturated aldehydes and ketones

The reaction of Cα,O-Dilithiooximes 2 and α-chloroketones afforded 5-(hydroxymethyl)-Δ²-soxazolines 4 . α,β-Unsaturated aldehydes and ketones reacted with 2 to give the corresponding acyclic 1,2-addition products 5 . The latter were cyclized with phosphorus pentoxide to 5-vinyl-Δ²-isoxazolines 6 .     

Comparison of Py*+/dU*- charge transfer state dynamics in 5-(1-pyrenyl)-2'-deoxyuridine nucleoside conjugates with amido-, ethylenyl-, and ethynyl linkers

Femtosecond, picosecond, and nanosecond transient absorbance (TA) and picosecond emission kinetics results are presented for three 5-(1-pyrenyl)-2'-deoxyuridine nucleosides each with a different two-atom linker joining pyrenyl C-1 to uracil C-5. The linkers are respectively -NHCO-, -(CH(2))(2)-, and -C[triple bond]C- for PAdU, PEdU, and PYdU. For all three nucleoside conjugates, most conformers undergo intramolecular charge transfer (CT) from their pyrenyl (1)(pi,pi) excited states to form Py(*+)/dU(*-) CT products in ultrashort times: 相似文献   

Pyrazoles and Pyrazolo[4,3- e]pyrrolo[1,2- a]pyrazines, I. Synthesis and Antimicrobial Activity

The synthesis of the title compounds was achieved using 1-phenyl-5-(pyrrol-1-yl)-1H-pyrazole-3-carboxylic acid azide as starting material. The latter compound was allowed to react with alcohols and amines to afford the corresponding carbamates and urea derivatives. Alkaline hydrolysis of the carbamates gave the corresponding amine, which was acylated and/or aroylated to give amide derivatives. These and the urea derivatives were subjected to cyclodehydration to give the title compounds. Antibacterial and antifungal activities were observed for several derivatives.     

Asphaltene self-association and water-in-hydrocarbon emulsions

The configuration of asphaltenes on the water-oil interface was evaluated from a combination of molar mass, interfacial tension, drop size distribution, and gravimetric measurements of model emulsions consisting of asphaltenes, toluene, heptane, and water. Molar mass measurements were required because asphaltenes self-associate and the level of self-association varies with asphaltene concentration, the resin content, solvent type, and temperature. Plots of interfacial tension versus the log of asphaltene molar concentration were employed to determine the average interfacial area of asphaltene molecules on the interface. The moles of asphaltenes per area of emulsion interface were determined from the molar mass data as well as drop size distributions and gravimetric measurements of the model emulsions. The results indicate that asphaltenes form monolayers on the interface even at concentrations as high as 40 kg/m(3). As well, large aggregates with molar masses exceeding approximately 10,000 g/mol did not appear to adsorb at the interface. The area occupied by the asphaltenes on the interface was constant indicating that self-associated asphaltenes simply extend further into the continuous phase than nonassociated asphaltenes. The thickness of the monolayer ranged from 2 to 9 nm.     

Spectrothermal investigation of the decomposition course of lanthanum acetate hydrate

Thermogravimetry, differential thermal, X-ray diffraction and infrared spectroscopy analyses showed La(CH₃COO)₃·1.5H₂O to decompose completely at 700°C yielding La₂O₃. The results revealed that the compound dehydrates in two steps at 130 and 180°C, and recrystallizes at 210°C. Water thus produced hydrolyzes surface acetates (at 310°C), releasing acetic acid into the gas phase. At 334°C, the anhydrous acetate releases gas phase CH₃COCH₃ to give La₂(CO₃)₃ residue, which decomposes to La₂O₂(CO₃) via the intermediate La₂O(CO₃)₂. On further heating up to 700°C, La₂O₃ is formed. IR spectroscopy of the gaseous products indicated a chemical reactivity at gas/solid interfaces formed throughout the decomposition course. As a result, CH₃COCH₃ was involved in a surface-mediated, bimolecular reaction, releasing CH₄ and C₄H₈ (isobutene) into the gas phase. Non-isothermal kinetic parameters, the rate constantk, frequency factorA, and activation energy ΔE, were calculated on the basis of temperature shifts experienced in the thermal processes encountered, at various heating rates (2–20 deg·min^?1).