Thermal extrusion of cellulose using hydroxypropyl methylcellulose

Cellulose - Hydroxypropyl methylcellulose (HPMC), a cellulose derivative, is highly water soluble, viscoelastic, and thermoplastic. However, the thermoplasticity of HPMC has not yet been studied in...     

A cost-scaling algorithm for minimum-cost node-capacitated multiflow problem

Mathematical Programming - Many practical integer programming problems involve variables with one or two-sided bounds. Dunkel and Schulz (A refined Gomory–Chvátal closure for polytopes...     

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.     

A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.     

Cyclization from Higher Excited States of Diarylethenes Having a Substituted Azulene Ring

The cyclization reaction of diarylethenes having an azulene ring occurs only via higher excited states. Novel diarylethenes having an azulene ring with a strong donor or acceptor were synthesized and examined in these reactions. A derivative having an electron-donating 1,3-benzodithiol-2-ylidenemethyl group at the 1-position of the azulene ring showed photochromism, whereas neither a derivative having a π-conjugated electron-donating group at the 3-position of the azulene ring nor derivatives having a π-conjugated electron-withdrawing group at the 1- or 3-position of the azulene ring showed any photochromism. The photoreactivities of these compounds were explained by calculating forces and bond orders on the excited states using density functional theory (DFT) and time-dependent (TD)-DFT.     

meso-Diazacorrphycenes: Neighboring Effect of Two Nitrogen Atoms

The neighboring effect of two adjacent heteroatoms influences the structures and properties of heterocyclic compounds. Herein, we demonstrated that the introduction of two adjacent sp² nitrogen atoms into a porphyrinic skeleton significantly enhanced its Brønsted basicity due to the repulsive interaction between two lone pairs on the nitrogen atoms. Palladium- and copper-templated ring closure of dichlorobis(dipyrrin) with hydrazine hydrate provided meso-diazacorrphycene palladium and copper complexes in good yields. The structural, magnetic, and electrochemical properties of the diazacorrphycene complexes were investigated experimentally and theoretically to elucidate the effect of the meso-nitrogen atoms.