Front Cover: Enhancement of dielectrophoresis-based particle collection from high conducting fluids due to partial electrode insulation

Dielectrophoresis (DEP) is a successful method to recover nanoparticles from different types of fluid. The DEP force acting on these particles is created by an electrode microarray that produces a nonuniform electric field. To apply DEP to a highly conducting biological fluid, a protective hydrogel coating over the metal electrodes is required to create a barrier between the electrode and the fluid. This protects the electrodes, reduces the electrolysis of water, and allows the electric field to penetrate into the fluid sample. We observed that the protective hydrogel layer can separate from the electrode and form a closed domed structure and that collection of 100 nm polystyrene beads increased when this occurred. To better understand this collection increase, we used COMSOL Multiphysics software to model the electric field in the presence of the dome filled with different materials ranging from low-conducting gas to high conducting phosphate-buffered saline fluids. The results suggest that as the electrical conductivity of the material inside the dome is reduced, the whole dome acts as an insulator which increases electric field intensity at the electrode edge. This increased intensity widens the high-intensity electric field factor zone resulting in increased collection. This informs how dome formation results in increased particle collection and provides insight into how the electric field can be intensified to the increase collection of particles. These results have important applications for increasing the recovery of biologically-derived nanoparticles from undiluted physiological fluids that have high conductance, including the collection of cancer-derived extracellular vesicles from plasma for liquid biopsy applications.     

Iridium‐Catalyzed Enantioselective Allylic Alkylation with Functionalized Organozinc Bromides

Iridium‐catalyzed enantioselective allylic alkylation of branched racemic carbonates with functionalized alkylzinc bromide reagents is described. Enabled by a chiral Ir/(P,olefin) complex, the method described allows allylic substitution with various primary and secondary alkyl nucleophiles with excellent regio‐ and enantioselectivities. The developed reaction was showcased in a concise, asymmetric synthesis of (?)‐preclamol.     

3D Dynamic analysis of soil–tool interaction using the finite element method

Previous experimental and finite element studies have shown the influence of both soil initial conditions and blade operating conditions on cutting forces. However, most of these finite element analyses (FEA) are limited to small blade displacements to reduce element distortion which can cause solution convergence problems. In this study a dynamic three-dimensional FEA of soil–tool interaction was carried out based on predefined failure surfaces to investigate the effect of cutting speed and angle on cutting forces over large blade displacements. Sandy soil was considered in this study and modeled using the hypoplastic constitutive model implemented in the commercial FEA package, ABAQUS. Results reveal the validity of the concept of predefined failure surfaces in simulating soil–tool interaction and the significant effect of cutting acceleration on cutting forces.     

Multi-species detection using multi-mode absorption spectroscopy (MUMAS)

The detection of multiple species using a single laser and single detector employing multi-mode absorption spectroscopy (MUMAS) is reported. An in-house constructed, diode-pumped, Er:Yb:glass micro-laser operating at 1,565 nm with 10 modes separated by 18 GHz was used to record MUMAS signals in a gas mixture containing C₂H₂, N₂O and CO. The components of the mixture were detected simultaneously by identifying multiple transitions in each of the species. By using temperature- and pressure-dependent modelled spectral fits to the data, partial pressures of each species in the mixture were determined with an uncertainty of ±2 %.     

Homogeneous Catalytic Hydrogenation of Amides to Amines

Hydrogenation of amides in the presence of [Ru(acac)₃] (acacH=2,4‐pentanedione), triphos [1,1,1‐tris‐ (diphenylphosphinomethyl)ethane] and methanesulfonic acid (MSA) produces secondary and tertiary amines with selectivities as high as 93 % provided that there is at least one aromatic ring on N. The system is also active for the synthesis of primary amines. In an attempt to probe the role of MSA and the mechanism of the reaction, a range of methanesulfonato complexes has been prepared from [Ru(acac)₃], triphos and MSA, or from reactions of [RuX(OAc)(triphos)] (X=H or OAc) or [RuH₂(CO)(triphos)] with MSA. Crystallographically characterised complexes include: [Ru(OAc‐κ¹O)₂(H₂O)(triphos)], [Ru(OAc‐κ²O,O′)(CH₃SO₃‐κ¹O)(triphos)], [Ru(CH₃SO₃‐κ¹O)₂(H₂O)(triphos)] and [Ru₂(μ‐CH₃SO₃)₃(triphos)₂][CH₃SO₃], whereas other complexes, such as [Ru(OAc‐κ¹O)(OAc‐κ²O,O′)(triphos)], [Ru(CH₃SO₃‐κ¹O)(CH₃SO₃‐κ²O,O′)(triphos)], H[Ru(CH₃SO₃‐κ¹O)₃(triphos)], [RuH(CH₃SO₃‐κ¹O)(CO)(triphos)] and [RuH(CH₃SO₃‐κ²O,O′)(triphos)] have been characterised spectroscopically. The interactions between these various complexes and their relevance to the catalytic reactions are discussed.