Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

Binding position of azathioprine with bovine serum albumin determined by measuring nuclear magnetic resonance relaxation time.

The interaction between azathioprine (AZ) and bovine serum albumin (BSA) is mainly due to hydrophobic binding according to the dependence of the binding constant on the ionic strength obtained by equilibrium dialysis. The binding constant and partition coefficient of AZ were smaller than those of warfarin, phenylbutazone and ibuprofen. Little variation in the proton chemical shift of AZ was observed whether there was an absence or presence of BSA (7.25 x 10(-5) M). The spin-lattice relaxation time (T1) of AZ decreased in the presence of BSA to 6-22%. The spin-spin relaxation rate (1/T2) of AZ increased 16-24 times for the methyl group and the imidazole ring and 8-13 times for the purine ring in the presence of BSA. The ratio of the spin-spin relaxation rate of the free AZ to the bound AZ ((1/T2)b/(1/T2)f) of the methyl group and the imidazole ring was 2-3 times larger than that of the purine ring. The binding of AZ to BSA was concluded to be mainly at the methyl group on the imidazole ring of AZ.     

A stability of the steady flow of compressible viscous fluid with respect to initial disturbance (v∞ ≠ 0)

We consider a compressible viscous fluid with the velocity at infinity equal to a strictly non‐zero constant vector in ?³. Under the assumptions on the smallness of the external force and velocity at infinity, Novotny–Padula (Math. Ann. 1997; 308 :439– 489) proved the existence and uniqueness of steady flow in the class of functions possessing some pointwise decay. In this paper, we study stability of the steady flow with respect to the initial disturbance. We proved that if H³‐norm of the initial disturbance is small enough, then the solution to the non‐stationary problem exists uniquely and globally in time, which satisfies a uniform estimate on prescribed velocity at infinity and converges to the steady flow in L_q‐norm for any number q? 2. Copyright © 2006 John Wiley & Sons, Ltd.     

Real-time monitoring of the desorption process of chlorine-covered Si(111)-‘1×1’ surface with second-harmonic generation

To elucidate the fundamental process underlying the semiconductor surface fabrication, isothermal desorption from a Cl/Si(111)-‘1×1’ surface was monitored by means of second-harmonic generation with 1064 nm light. During the desorption, surface Cl-coverages were obtained in real time. The temperature dependence of the desorption rates revealed that the energy barrier against chloride desorption is 2.1 eV. A very slow second phase in the recovery of the second-harmonic intensity is associated with reconstruction of 7×7 DAS structure following the desorption. The activation energy for the reconstruction was 2.4 eV.     

Trinucleon cluster structure at high-excitation energies in A=6 nuclei

Trinucleon molecular structures in ⁶He and ⁶Be were investigated by using the ⁶Li(⁷Li, ⁷Be)⁶He reaction at 455 MeV and ⁶Li(³He, t)⁶Be reaction at 450 MeV, respectively. Binary decays into t + t from a broad state at E _x =18.0±1.0 MeV in ⁶He and into ³He + ³He from one at E _x =18.0±1.2 MeV in ⁶Be, respectively, were observed by measuring trinucleon cluster decays in coincidence with reaction particles. The branching ratios for binary decay were estimated to be about 0.7 for ⁶He and ⁶Be. These large branching ratios show that a trinucleon cluster state exists as an isobaric partner around E _x =18 MeV in ⁶He and ⁶Be.     

A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Electroneutrality coupling of electron transfer at an electrode surface and ion transfer across the interface between thin-layer of 1-octyl-3-methylimidazolium bis(perfluoroalkylsulfonyl)imide covering the electrode surface and an outer electrolyte solution.

The electrode reaction of decamethylferrocene (DMFc) dissolved in a thin layer of a room-temperature molten salt (RTMS), 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C8mimC1C1N) or 1-octyl-3-methylimidazolium bis(pentafluoroethylsulfonyl)imide (C8mimC2C2N), on a self-assembled monolayer-modified gold electrode is coupled with the ion transfer across the interface between the RTMS and the outer aqueous solution (W) to give a voltammogram whose shape resembles a voltammogram of a simple one-electron transfer process. The electroneutrality of the RTMS layer during the oxidation of DMFc to decamethylferricenium ion is maintained by the concomitant dissolution of C8mim+ ion from the RTMS phase to the W phase, and the reduction of decamethylferricenium ion to DMFc is accompanied by the transfer of either C1C1N- or C2C2N- from RTMS to W. The midpoint potential of the voltammogram varies with the concentration of the salt in the aqueous phase, C8mimCl or LiCnCnN (n = 1 or 2), in a Nernstian manner, showing that the phase-boundary potential between the RTMS and the W is controlled by the partition of these ions. Although the phase-boundary potential across the RTMS / W interface is Nernstian with respect to the ions common to both phases at the equilibrium, the polarization at the RTMS / W interface under current flow distorts the shape of the voltammograms, resulting in a wider peak separation in the voltammogram.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Phase Conjugation in Saturable Absorbing Dye Films by Degenerate Four-Wave Mixing and Holographic Processes Using Nanosecond Pulse and CW Lasers

We report on the simultaneous generation of phase-conjugate signals by degenerate four-wave mixing (DFWM) and holographic processes using a nanosecond pulse and a CW lasers in polyvinyl alcohol (PVA) films doped with four kinds of saturable absorbing dyes. For the pulse laser, of the four kinds of dye-doped PVA films, the erythrosine B-doped PVA and uranine doped-PVA films generate PC signals only by the DFWM process, while the other dye-doped PVA films generate PC signals simultaneously by not only the DFWM process but also the holographic process. Especially, the safranin T-doped PVA film generates strong PC signals by the holographic process. In contrast, all of the dye-doped PVA films generate the two types of PC signals for the CW laser. The fading of dye molecules is found to result in the generation of the holographic component of PC signals which governs the temporal behavior of the total PC signals.     

Transfructosylation of rebaudioside A (a sweet glycoside of Stevia leaves) with Microbacterium beta-fructofuranosidase.

It was found that a beta-fructofuranosidase produced by Microbacterium sp. H-1 has potent trans-beta-fructofuranosylation activity from sucrose (donor). By means of this enzyme system, rebaudioside A (RA), the second major sweet steviol glycoside of the leaves of Stevia rebaudiana, was subjected to transfructosylation, affording a mono-beta-fructofuranosylated product (RA-F) in a high yield. The structure of RA-F was elucidated as beta-D-fructofuranosyl-(2----6)-beta-D-glucopyranosyl ester of steviol-13-O-[beta-D-glucopyranosyl-(1----2)]- [beta-D-glucopyranosyl-(1----3)]-beta-D-glucopyranoside. Some improvement in the quality of sweetness was observed for RA-F.