Palladium-catalyzed pseudo-domino cyclizations: An easy entry toward polycondensed pyrrolidone derivatives

A new type I palladium-catalyzed pseudo-domino process is developed, in which a single Pd-based catalytic system promotes two mechanistically unrelated, sequential catalytic cycles in chronologically distinct order. Suitable precursors undergo an allylic alkylation and a Heck coupling in sequence, affording polycondensed pyrrolidone derivatives. Depending on the starting precursors, intra/inter or doubly intramolecular processes can be obtained. The allylic alkylation process takes place always very smoothly. On the other hand, the Heck coupling turns out to be rather difficult either when the process is intermolecular, or when an intramolecular process generates polycondensed structures featuring three fused bonds connected to a common carbon atom. In such difficult cases, use of the Herrmann-Beller phosphapalladacycle allowed to catalyze the coupling. This study demonstrates also that allylic alkylations can be catalyzed by the Herrmann-Beller phosphapalladacycle.     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

Crystal and molecular structure of nitrosyl(1,10-phenanthroline)-bis(triphenylphosphine)iridium(I) Dihexafluorophosphate, [Ir(NO)(phen)(PPh3)2][PF6]2

Summary The structure of [Ir(NO)(phen)(PPh₃)₂][PF₆]₂ has been determined from x-ray diffractometer data. The compound crystallizes in space groupPnam with four molecules in a unit cell witha = 19.924(12),b = 14.793(9) andc = 16.348(9) A. Full-matrix least-squares refinement has led to a final R value of 0.061 for the 4796 observed reflections. The structure consists of well-separated ions, and the geometry around the metal is trigonal bipyramidal with nitrosyl and bidentate 1,10-phenanthroline (in spite of the very narrow bite angle of 75.8°) ligands occupying the equatorial positions and the triphenylphosphine ligands the axial positions. The cation has an imposed crystallographicm symmetry. Important bond lengths are as follows: Ir-P, 2.391(3): Ir-N (nitrosyl) 1.700(12): Ir-N (1,10-phenanthroline) 2.103(12) and 2.142(11): N-O, 1.201(18)A. The nitrosyl ligand is linear [Ir-N-O = 179.9(9)°] so that this complex can be formulated as an NO⁺ complex of iridium(I).     

FLUORESCENCE OF Euglena gracilis PHOTORECEPTOR PIGMENT: AN in vivo MICROSPECTROFLUOROMETRIC STUDY

Abstract— The spectroscopic characterization of the photoreceptor pigment is one of the main questions in the study of the photosensory transduction chains in photomotile microorganisms. One of the possible techniques that can be used is in vivo microspectrofluorometry. By means of a tunable dye-laser microspectrofiuorometer developed by us, we have investigated some of the spectroscopic properties of the photoreceptor pigment of the green flagellate Euglena gracilis. The in vivo fluorescence excitation spectrum has been determined and the fluorescence quantum yield has been measured. The results show that flavins are indeed present in the paraflagellar body of E. gracilis and that their fluorescence quantum yield is much lower than that of a free flavin. An estimate of the order of magnitude of the rate constants for primary molecular reactions is tentatively given.     

The crystal structure of tris(acetonitrile)nitrosylbis(triphenylphosphine)iridium(III) dihexafluorophosphate. An unusual iridium nitrosyl hexacoordinate complex

Summary The structure of [Ir(NCMe)₃(NO)(PPh₃)₂][PF₆]₂ has been ] determined by x-ray methods. Crystals are orthorhombic, space groupPca 2₁ , witha = 21.753(14),b = 11.678(10),c = 18.474(12) Å and Z = 4. The structure has been solved from diffractometer data and refined by full-matrix leastsquares to R = 0.076 for 2776 observed reflections. The cation is a hexacoordinate and not a pentacoordinate species as expected. The extra acetonitrile molecule,trans to the nitrosyl ligand, is much more weakly bound to the metal atom [Ir-N 2.360(26) against 1.965(20) and 1.912(14) Å for the other two acetonitriles]. The nitrosyl is bent [Ir-N-O 111(1)° Å] and acts as the formally one-electron donor NO^–.     

Synthesis,characterization and coordination chemistry of the new tetraazamacrocycle 4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-bis(methanephosphonic acid monoethyl ester) dipotassium salt

A new potentially hexadentate tetraazamacrocycle based on the cyclen skeleton has been synthesized and fully characterized. The macrocycle 4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-bis(methanephosphonic acid monoethyl ester) dipotassium salt (Me2DO2PME) contains mutually trans monoethyl ester phosphonate acid substituents on two nitrogen atoms, and trans methyl substituents on the other two nitrogen atoms. The protonation constants of this macrocycle and the stability constants of its complexes with Cu2+, Zn2+, Gd3+ and Ca2+ ions have been determined by pH potentiometric titrations. The protonation sequence of the macrocycle has been studied by 1H, 31P[1H] and 13C[1H] NMR spectroscopy: the first and second protonation steps take place at the methyl-substituted nitrogen atoms, while the third protonation involves one oxygen from a phosphonate group. Upon protonation, all the CH2 ring protons become magnetically inequivalent on the NMR time scale due to a slow conformational rearrangement, most likely occasioned by the formation of multiple hydrogen bonds within the macrocyclic ring. Me2DOPM forms neutral, mononuclear complexes with all the metals investigated. The presence of hydroxo complexes was observed for Ca2+ and Zn2+ at high pH values. Structural information on the neutral complex [Cu(Me2DO2PME)] has been obtained by a solution X-Band EPR study. It is proposed that Me2DO2PME binds Cu2+ in a distorted octahedral structure using all of its donor atoms, i.e. the four nitrogen atoms and the two phosphonate oxygen atoms. The redox chemistry of [Cu(Me2DO2PME)] in dimethyl sulfoxide and water has been studied by electrochemical measurements. Cyclic voltammetry in DMSO shows the complex to undergo a quasireversible one-electron reduction step leading to an unstable CuI species.     

Long-term diffusive samplers for the indoor air quality evaluation

Three kinds of diffusion samplers, conceived to perform long-term samplings in indoor sites are illustrated in this work. Two of them, in part deriving from the previous "Analyst for VOC" device, extend the field of application up to the semi-volatile organic compounds (SVOC), PAHs and nicotine in particular. A third device, which employs a basic barium hydroxide solution as an absorbing medium, is proposed for the determination of carbon dioxide levels which indicate the air change quality in the indoor sites. Laboratory and field experiments, performed in order to assess the reliability of the proposed devices, are shown. A monthly monitoring campaign, performed at three private apartments in Rome and its outskirts highlights that the indoor pollution levels are a complex function of various concurrent and opposite factors, like external air pollution, internal sources, air change rate and sink effect of surfaces, which contribute to depletion phenomena through adsorption and/or decomposition processes.     

Structure and dynamics of the hydrogen-bond network around (R,R)-pterocarpans with biological activity in aqueous solution

Molecular dynamics simulations were carried out in the presence of 2380 water molecules (TIP3P) to explore the conformational preferences of 3,9-dimethoxy-4-prenylpterocarpan (bitucarpin A) and 3,9-dihydroxy-4,8-diprenylpterocarpan (erybraedin C) and the H-bond network around them, using the empirical general AMBER force field (GAFF). Specific angle and torsional parameters have been improved in order to match the geometries of the minimum energy structures obtained from an earlier DFT/ab initio study in vacuo, taking into account a few configurations [Alagona, G.; Ghio, C.; Monti, S. Phys. Chem. Chem. Phys. 2004, 6, 2849-2857]. RESP partial charges were assigned to reproduce the electrostatic potential determined at the HF/6-31G level of theory. The analysis of trajectories allowed the conformations of bitucarpin and erybraedin as well as the distribution of water molecules around them to be elucidated. During one of the simulations only, the scaffold of erybraedin undergoes interconversion from its most stable Ht conformation to the Ot one and vice versa. Radial distribution functions, coordination numbers, and angular distributions put forward the extent of solvent structure and the hydrogen bonding behavior of their various (methoxy, hydroxyl, or ethereal) oxygen atoms. The distribution of solvent molecules in the first and second solvation shells as well as the residence times for the different solute-solvent interacting sites have been considered.     

Mechanical properties decay and morphological behaviour of biodegradable films for agricultural mulching in real scale experiment

The use of plastic materials in agriculture causes the serious drawback of huge quantities of waste. The introduction of biodegradable materials, which can be disposed directly into the soil, can be one possible solution to this problem. Biodegradable materials are actually innovative materials; therefore, their physical properties must be evaluated in relation to their functionality during the use in field. In the present research results of experimental tests carried out on biodegradable films used in strawberries protected cultivation are presented. The decay of some relevant physical parameters of biodegradable films during the cultivation period was monitored by laboratory tests (SEM analysis, mechanical tensile tests and infrared reflectance spectroscopy). Infrared spectroscopy clearly indicated that the mechanical degradation starts from the starch component of the material. Tensile tests showed that the value of elongation at break of biodegradable materials decreased in some cases by 300% after 10 days of field application.