Preparation of Co-Processed Excipients for Controlled-Release of Drugs Assembled with Solid Lipid Nanoparticles and Direct Compression Materials

The purpose of the study was to develop a novel, directly compressible, co-processed excipient capable of providing a controlled-release drug system for the pharmaceutical industry. A co-processed powder was formed by adsorption of solid lipid nanoparticles (SLN) as a controlled-release film onto a functional excipient, in this case, dicalcium phosphate dihydrate (DPD), for direct compression (Di-Tab^®). The co-processed excipient has advantages: easy to implement; solvent-free; industrial scaling-up; good rheological and compressibility properties; and the capability to form an inert platform. Six different batches of Di-Tab^®:SLN weight ratios were prepared (4:0.6, 3:0.6, 2:0.6, 1:0.6, 0.5:0.6, and 0.25:0.6). BCS class III ranitidine hydrochloride was selected as a drug model to evaluate the mixture’s controlled-release capabilities. The co-processed excipients were characterized in terms of powder rheology and dissolution rate. The best Di-Tab^®:SLN ratio proved to be 2:0.6, as it showed high functionality with good flow and compressibility properties (Carr Index = 16 ± 1, Hausner Index = 1.19 ± 0.04). This ratio could control release for up to 8 h, so it fits the ideal profile calculated based on biopharmaceutical data. The compressed systems obtained using this powder mixture behave as a matrix platform in which Fickian diffusion governs the release. The Higuchi model can explain their behavior.     

Pricing policies for selling indivisible storable goods to strategic consumers

Annals of Operations Research - We study the dynamic pricing problem faced by a monopolistic retailer who sells a storable product to forward-looking consumers. In this framework, the two major...     

Influence of optical constants in carbon-based dispersions for enhanced solar evaporation

Journal of Thermal Analysis and Calorimetry - Carbon-based nano- and microfluid dispersions show promise as effective media for solar-assisted desalination. They act as strong solar absorbers in...     

Hardware-in-the-loop simulation of wave energy converters based on dielectric elastomer generators

Dielectric elastomer generators (DEGs) are soft electrostatic generators based on low-cost electroactive polymer materials. These devices have attracted the attention of the marine energy community as a promising solution to implement economically viable wave energy converters (WECs). This paper introduces a hardware-in-the-loop (HIL) simulation framework for a class of WECs that combines the concept of the oscillating water columns (OWCs) with the DEGs. The proposed HIL system replicates in a laboratory environment the realistic operating conditions of an OWC/DEG plant, while drastically reducing the experimental burden compared to wave tank or sea tests. The HIL simulator is driven by a closed-loop real-time hydrodynamic model that is based on a novel coupling criterion which allows rendering a realistic dynamic response for a diversity of scenarios, including large scale DEG plants, whose dimensions and topologies are largely different from those available in the HIL setup. A case study is also introduced, which simulates the application of DEGs on an OWC plant installed in a mild real sea laboratory test-site. Comparisons with available real sea-test data demonstrated the ability of the HIL setup to effectively replicate a realistic operating scenario. The insights gathered on the promising performance of the analysed OWC/DEG systems pave the way to pursue further sea trials in the future.

     

Foliations on $$\mathbb {P}^2$$ P 2 with only one singular point

Geometriae Dedicata - We prove a criterion for Benjamini-Schramm convergence of periodic orbits of Lie groups. This general observation is then applied to homogeneous spaces and the space of...     

A Safety Strategy for Producing Poly(Acrylic Acid) of Low Molar Mass

The synthesis of poly(acrylic acid) (PAA) of low molar mass under safe conditions is difficult due to the high polymerization rate of acrylic acid (AA) and the fast heat generation. The aqueous‐solution “semibatch” polymerization of non‐ionized AA in almost starved conditions involves high initiator loads when low molar masses are required. This article proposes the simultaneous feeding of AA and nonconventional chain transfer agents (CTA) as a strategy aimed at controlling both the molar masses and the generated heat rate. Three CTAs are investigated: 2‐mercaptoethanol, thioglycolic acid, and isopropyl alcohol. Even when PAA of relatively low molar mass can be produced by adequately selecting the flow rates and concentrations of both AA and CTA, it is found that the nature of CTA can have a significant effect on the polymerizations kinetics. The mechanisms responsible for these effects are discussed with the help of a representative mathematical model.

     

Application of thermal analysis for evaluating the digestion of microwave pre-treated sewage sludge

The effect of microwave pre-treatment (MwP) on anaerobic digestion of sewage sludge was studied by means of thermal analysis and evolved gas analysis. The effect of the pre-treatment at low energy input (<1000 kJ L^?1) on sludge solubilisation was studied with the aid of response surface methodology. The pre-treatment process was subsequently studied at energies of 488–2700 kJ L^?1 to evaluate the improvement in biogas production under mesophilic conditions. Organic matter modifications were studied using a Setaram TGA92 analyser at atmospheric pressure coupled to an MSC200 quadrupole mass spectrometer from Balzers. Particle size analysis was carried out using a Laser Diffraction Particle Size Analyser LS 13 320 Beckmann Coulter for evaluating the effect of MwP on sludge particles. Results showed an increase in organic matter solubilisation with the increase in the energy applied. Modifications in the specific surface area of the organic matter due to the MwP resulted in increments in methane yields. However, an accumulation of complex compounds was observed in thermal profiles at the maximum energy input (2700 kJ L^?1). Semi-continuous digestion experiments were evaluated using as substrate pre-treated sludge at the optimum energy value (975 kJ L^?1). Results showed a significant increase in methane yield (43 %) when evaluating the process at hydraulic retention times (HRTs) of 25–10 days.     

Cooperative Chemotaxis of Magnesium Microswimmers for Corrosion Spotting

Numerous artificial micro- and nanomotors, as well as various swimmers have been inspired by living organisms that are able to move in a coordinated manner. Their cooperation has also gained a lot of attention because the resulting clusters are able to adapt to changes in their environment and to perform complex tasks. However, mimicking such a collective behavior remains a challenge. In the present work, magnesium microparticles are used as chemotactic swimmers with pronounced collective features, allowing the gradual formation of macroscopic agglomerates. The formed clusters act like a single swimmer able to follow pH gradients. This dynamic behavior can be used to spot localized corrosion events in a straightforward way. The autonomous docking of the swimmers to the corrosion site leads to the formation of a local protection layer, thus increasing corrosion resistance and triggering partial self-healing.