HPTLC Determination of Antioxidants in the Polymer Container of Parenteral Infusion Fluid

JPC – Journal of Planar Chromatography – Modern TLC -     

Mn(III)-catalyzed oxidation of sulfides to sulfoxides with hydrogen peroxide

Sulfides were selectively oxidized to the corresponding sulfoxides in good yields with hydrogen peroxide using a manganese(III) Schiff-base complex as a catalyst in glacial acetic acid as solvent under mild conditions.     

Determination of Hg(II) in Environmental Water Samples Using DLLME Method Prior to GC-FID

Mercury exists in two forms in environment, inorganic salts and organic compounds. Determination of mercury is very important, due to its health effects. In the present research, diphenylation of mercury using phenylboronic acid as a derivatization reagent was used for the determination of Hg(II) in real water samples. A simple, rapid and cheap method named dispersive liquid–liquid microextraction was used for the extraction of analyte under the following conditions: extraction solvent 16 μL of carbon tetrachloride, disperser solvent 1 mL of ethanol and sample volume 5 mL. Under the optimal conditions, the enrichment factor for diphenylmercury was 931 and the limit of detection calculated on the basis of five replicates was 0.004 μg mL^?1. The repeatability of the method expresses as relative standard deviation was 5.1 (n = 6). The linear range was between 0.01 and 10 μg mL^?1. The performance of the proposed technique was evaluated for the determination of mercury in different environmental water samples.     

Determination of chlorophenols in environmental water samples using directly suspended droplet liquid-liquid-liquid phase microextraction prior to high-performance liquid chromatography

A new sample preparation method named directly suspended droplet liquid-liquid-liquid phase microextraction was used in this research for determination of three chlorophenols in environmental water samples. The analytes (2-chlorophenol, 3-chlorophenol and 4-chlorophenol) were extracted from 4.5?mL acidic donor phase, (pH 2, P1) into an organic phase, 350?µL?of benzene/1-octanol (90?:?10 v/v, P2) and then were back-extracted into a 7?µL droplet of an basic (pH 13) aqueous solution (acceptor phase, P3). In this method, contrary to the ordinary single drop liquid-phase microextraction technique, an aqueous large droplet is freely suspended on the surface of the organic solvent, without using a microsyringe as supporting device. This aqueous microdroplet is delivered at the top-centre position of an immiscible organic solvent which is laid over the aqueous donor sample solution while the solution is being agitated. Then, the acceptor phase containing chlorophenols was withdrawn back into a HPLC microsyringe and neutralised by adding of 7?µL HCl 0.1?M. The total amount was eventually injected into the HPLC system with UV detection at 225?nm for further analysis. Parameters such as the organic solvent, phases volumes, extraction and back-extraction times, stirring rate and pH values were optimised. The calibration graphs are linear in the range of 10–2000?µg?L^?1 with r?≥?0.9973. The enrichment factors were ranged from 115 to 170, and the limit of detection (LOD, n?=?7) varied from 5 to 10?µg?L^?1. The relative standard deviations (RSDs, n?=?5) were found 6.8 to 7.4 at S/N?=?3. All experiments were carried out at room temperature, (22?±?0.5°C).     

Nonlinear signal-processing model for signal generation in multilevel two-dimensional optical storage

A two-dimensional optical storage (TwoDOS) format with binary modulation is being developed in which channel bits are arranged on a two-dimensional hexagonal lattice [W. M. J. Coene, in Optical Data Storage, Vol. 88 of OSA Trends in Optics and Photonics Series (Optical Society of America, Washington, D.C., 2003), pp. 90-92]. The aim is to increase the capacity by a factor of 2 and the data rate by a factor of 10 over third-generation Blu-ray Disc technology. Following a route similar to that used in one-dimensional conventional optical storage [Jpn. J. Appl. Phys. 42, 1074 (2003)] could lead to a further increase in capacity by the addition of another dimension to writing data, such as the use of multiple levels instead of the two levels (pit and land) used in the binary TwoDOS disk format. We present a nonlinear signal-processing model for signal waveform generation as a function of the M-ary channel symbols, as well as simulated signal readouts for multilevel TwoDOS.     

Template-based growth of titanium dioxide nanorods by a particulate sol-electrophoretic deposition process

TiO 2 nanorods have been successfully grown into a track-etched polycarbonate (PC) membrane by a particulate sol-electrophoretic deposition from an aqueous medium.The prepared sols had a narrow particle size distribution around 17 nm and excellent stability against aging,with zeta potentials in the range of 47-50 mV at pH 2.It was found that TiO 2 nanorods were grown from dilute aqueous sol with a low,0.1-M concentration.Fourier transform infrared spectroscopy (FT-IR) analysis confirmed that a full conversi...     

Application of the localized surface plasmon resonance of gold nanoparticles for the determination of 1,1-dimethylhydrazine in water: Toward green analytical chemistry

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles that are smaller than the incident wavelength. In this work, we proposed a simple, fast, and green method for spectrophotometric determination of unsymmetrical 1,1-dimethylhydrazine (UDMH) based on LSPR property of gold nanoparticles (AuNPs). An LSPR band is produced via reduction of Au³⁺ ions in solution by UDMH as active reducing agent in the presence of cetyltrimethylammonium chloride as a capping agent. Some important parameters in the formation of LSPR including Au(III) concentration, pH, concentration of stabilizer, and reaction time were studied and optimized. Under optimum conditions, the LSPR intensity displays linear response with the increasing UDMH concentration in the range from 0.5–10 μg/mL at 550 nm with a detection limit of 0.2 μg/mL. Also, the relative standard deviation for ten replicate determination of 5.0 μg/mL of UDMH was 3%. Usage of AuNPs as new nontoxic reagent instead of hazardous reagents in the spectrophotometric determination of UDMH is a step toward green analytical chemistry. The proposed method was successfully applied for determination of UDMH in water and wastewater samples.     

Cadmium(II) N-acetylcysteine complex formation in aqueous solution

The complex formation between Cd(II) ions and N-acetylcysteine (H(2)NAC) in aqueous solution was investigated using Cd K- and L(3)-edge X-ray absorption and (113)Cd NMR spectroscopic techniques. Two series of 0.1 M Cd(II) solutions with the total N-acetylcysteine concentration c(H2NAC) varied between 0.2-2 M were studied at pH 7.5 and 11.0, respectively. At pH = 11 a novel mononuclear [Cd(NAC)(4)](6-) complex with the average Cd-S distance 2.53(2) ? and the chemical shift δ((113)Cd) = 677 ppm was found to dominate at a concentration of the free deprotonated ligand [NAC(2-)] > 0.1 M, consistent with our previous reports on cadmium tetrathiolate complex formation with cysteine and glutathione. At pH 7.5 much higher ligand excess ([HNAC(-)] > 0.6 M) is required to make this tetrathiolate complex the major species. The (113)Cd NMR spectrum of a solution containing c(Cd(II)) = 0.5 M and c(H2NAC) = 1.0 M measured at 288 K showed three broad signals at 421, 583 and 642 ppm, which can be attributed to CdS(3)O(3), CdS(3)O and CdS(4) coordination sites, respectively, in oligomeric Cd(II)-NAC species with single thiolate bridges between the cadmium ions.     

Directly Suspended Droplet Three Liquid Phase Microextraction of Diclofenac Prior to LC

Directly suspended droplet liquid–liquid–liquid microextraction (LLLME) has been used to determine residues of diclofenac (2-[2-(2,6-dichlorophenyl) aminophenyl] ethanoic acid), in environmental water samples. In this technique a free suspended droplet of an aqueous solvent is delivered to the top-center position of an immiscible organic solvent floating on the top of an aqueous sample while being agitated by a stirring bar placed on the bottom of the sample cell. Recently, diclofenac was found as an environmental contaminant in sewage, surface, ground and drinking water samples. In the present work, diclofenac was extracted from water samples by LLLME and analysed by HPLC with UV detection at 281 nm. Factors such as organic solvent, extraction and back extraction times, stirring rate and the pH of acceptor and donor phases were optimized. Enrichment factor and detection limit (LOD, n = 7) were 102 and 0.1 μg L⁻¹, respectively. The linearity ranged from 0.5 to 2,000 μg⁻¹ with a %RSD (n = 5) of 7.2 at S/N = 3. All experiments were carried out at room temperature (22 ± 0.5 °C).