Iron speciation by solid phase extraction and flame atomic absorption spectrometry using N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane

A new Schiff base, N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane, has been synthesized for the very sensitive determination of iron(III) and iron(II) in natural water samples. It enabled a very selective and rapid method for iron determination to be developed. The method has also been applied to total iron determination in sediment samples. In the preconcentration system, the Schiff base reagent is mixed with the samples and chelates containing iron(III). The complexes are then adsorbed on silica gel within a column system. Elution of the adsorbed chelate from the silica gel was performed with a small volume of acetone containing 2.5% nitric acid. The iron is measured off-line by flame atomic absorption spectrometry. The method can be applied to the preconcentration, separation and speciation of iron. The effects of parameters such as pH, sample flow rate, eluent flow rate, foreign ions and ligand concentration have been investigated. The effect of humic acid that can produce complexes with metal ions in natural systems has also been investigated. The results obtained indicate that the method is not affected by the presence of up to 10 ppm humic acid, which would be a very high concentration to be present in natural systems. The solid phase extraction method developed has been applied to the determination of iron in both natural water samples and sediment samples. The LOD was found to be 0.17 mg L⁻¹ when no preconcentration was used, although preconcentration factors of 100 could be achieved. The recovery values for spiked samples were between 100 and 104%. The results were compared statistically with those from the standard 1,10 phenanthroline method used for iron speciation in water systems. A Student’s t-test indicated no significant difference between the two methods. In addition, this method was applied to the analysis of a certified sediment sample, LGC 6156. Generally, a 10-fold preconcentration factor was required for the analysis of natural water samples.     

Effective binuclear Pd(II) complexes for Suzuki reactions in water

A series of new ionic binuclear Pd(II) complexes supported by water‐soluble bis(α‐diimine) ligands were prepared and employed as catalysts for the palladium‐catalyzed Suzuki reaction in aqueous media. The binuclear nature of the complexes increased the reaction rate, while electronic and steric modification of the ligand frameworks had a remarkable influence upon the catalytic activity of the palladium complexes. The catalysts were shown to be homogeneous through mercury poisoning experiments and complexes could be recycled more than 10 times without loss of catalytic activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Statistics and characterization of matrices by determinant and trace

The Ramanujan Journal - Answering a question of Erdös, Komlós proved in 1968 that almost all $$n\times n$$ Bernoulli matrices are nonsingular as $$n\rightarrow \infty $$ . In this paper,...     

A novel amperometric hydrogen peroxide biosensor based on pyrrole-PAMAM dendrimer modified gold electrode

Horseradish peroxidase (HRP) was immobilized into an electrochemically prepared copolymer of pyrrole–PAMAM (PAMAM; polyamidoamine) dendrimers for the construction of amperometric hydrogen peroxide biosensor. First, second, and third generation amidoamine–pyrrole dendrons having branched amine periphery and focal pyrrole functionality were synthesized via divergent pathway. Pyrrole dendrimers were covalently attached onto the electrode surface and polymerized by electrochemical copolymerization with pyrrole monomer. The synthesized dendrimers and copolymers have been characterized by FTIR-ATR and NMR. These copolymers have been utilized as conducting films for amperometric hydrogen peroxide sensing. The HRP retains its bioactivity after immobilization into the dendronized pyrrole-copolymers. Amperometric response was measured as a function of concentration of hydrogen peroxide, at fixed potential of +0.35 V vs. Ag/AgCl in a phosphate buffered saline (pH 7.5). The effect of pH and temperature of the medium, storage, and reusability properties were investigated. The results indicate an efficient immobilization of enzyme onto the PAMAM type dendrimer modified surface containing pyrrole monomer, which leads to high enzyme loading, and increased lifetime stability of the electrode.     

Established and emerging strategies for polymer chain-end modification

The development of “controlled” and “living” polymerization processes with high end-group fidelity has enabled an unprecedented range of polymeric materials with specific chain-end functionality to be prepared. This highlight provides an overview of available strategies and evaluation of recent approaches for the chain-end functionalization of polymers prepared through controlled chain-growth polymerizations. As a tribute to Professor Robert B. Grubbs on the occasion of his 75th birthday, we also take this opportunity to highlight methods for the chain-end modification of polymers prepared by ring-opening metathesis polymerization within the broader context of functional group tolerant, living polymerizations. Finally, we focus attention toward new directions in polymer chain-end modifications, describing existing gaps in current strategies, and detailing recently reported protocols that show significant improvements over traditional methods. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2903–2914     

Optimal Groomings with Grooming Ratios Six and Seven

Grooming uniform all‐to‐all traffic in optical (SONET) rings with grooming ratio C requires the determination of a decomposition of the complete graph into subgraphs each having at most C edges. The drop cost of such a grooming is the total number of vertices of nonzero degree in these subgraphs, and the grooming is optimal when the drop cost is minimum. The determination of optimal C‐groomings has been considered for , and completely solved for . For , it has been shown that the lower bound for the drop cost of an optimal C‐grooming can be attained for almost all orders with 5 exceptions and 308 possible exceptions. For , there are infinitely many unsettled orders; especially the case is far from complete. In this paper, we show that the lower bound for the drop cost of a 6‐grooming can be attained for almost all orders by reducing the 308 possible exceptions to 3, and that the lower bound for the drop cost of a 7‐grooming can be attained for almost all orders with seven exceptions and 16 possible exceptions. Moreover, for the unsettled orders, we give upper bounds for the minimum drop costs.     

Aequorin mutants with increased thermostability

Bioluminescent labels can be especially useful for in vivo and live animal studies due to the negligible bioluminescence background in cells and most animals, and the non-toxicity of bioluminescent reporter systems. Significant thermal stability of bioluminescent labels is essential, however, due to the longitudinal nature and physiological temperature conditions of many bioluminescent-based studies. To improve the thermostability of the bioluminescent protein aequorin, we employed random and rational mutagenesis strategies to create two thermostable double mutants, S32T/E156V and M36I/E146K, and a particularly thermostable quadruple mutant, S32T/E156V/Q168R/L170I. The double aequorin mutants, S32T/E156V and M36I/E146K, retained 4 and 2.75 times more of their initial bioluminescence activity than wild-type aequorin during thermostability studies at 37 °C. Moreover, the quadruple aequorin mutant, S32T/E156V/Q168R/L170I, exhibited more thermostability at a variety of temperatures than either double mutant alone, producing the most thermostable aequorin mutant identified thus far.     

A Complete Solution to Spectrum Problem for Five‐Vertex Graphs with Application to Traffic Grooming in Optical Networks

A G‐design of order n is a decomposition of the complete graph on n vertices into edge‐disjoint subgraphs isomorphic to G. Grooming uniform all‐to‐all traffic in optical ring networks with grooming ratio C requires the determination of graph decompositions of the complete graph on n vertices into subgraphs each having at most C edges. The drop cost of such a grooming is the total number of vertices of nonzero degree in these subgraphs, and the grooming is optimal when the drop cost is minimum. The existence spectrum problem of G‐designs for five‐vertex graphs is a long standing problem posed by Bermond, Huang, Rosa and Sotteau in 1980, which is closely related to traffic groomings in optical networks. Although considerable progress has been made over the past 30 years, the existence problems for such G‐designs and their related traffic groomings in optical networks are far from complete. In this paper, we first give a complete solution to this spectrum problem for five‐vertex graphs by eliminating all the undetermined possible exceptions. Then, we determine almost completely the minimum drop cost of 8‐groomings for all orders n by reducing the 37 possible exceptions to 8. Finally, we show the minimum possible drop cost of 9‐groomings for all orders n is realizable with 14 exceptions and 12 possible exceptions.