Explicit H1-Estimate for the Solution of the Lamé System with Mixed Boundary Conditions

In this paper we consider the Lamé system on a polygonal convex domain with mixed boundary conditions of Dirichlet-Neumann type. An explicit L² norm estimate for the gradient of the solution of this problem is established. This leads to an explicit bound of the H¹ norm of this solution. Note that the obtained upper-bound is not optimal.     

Low-temperature formation and characterization of Cu2O nanoparticles in the binary gold alloys

Thermal analyses, using differential scanning calorimetry (DSC) and dilatometry, reveal an important anomaly at low temperature for Au-25 wt.% Cu composition after homogenization at 700°C during 2 hours under vacuum followed by heating up to 160°C before water quenching. This anomaly has been already observed and not explained. Surface characterization, using scanning electron microscopy (SEM), atomic force microscopy (AFM), and scanning tunneling microscopy (STM), exhibits a specific topography, consisting of a nanostructured surface. The precipitates of nanostructured particles are homogeneously scattered all over the surface for this 18-carat gold alloy. Moreover, X-ray photoelectron spectroscopy (XPS) shows that the composition of the observed particles corresponds to cuprous oxide phase (Cu₂O). The formation of such material can be explained by the diffusion of copper atoms from the lattice to the surface at 160°C. Pulsed radio-frequency glow discharge optical emission spectroscopy (RF GD-OES) further proves the proposed Cu₂O formation through a diffusion process. The appearance of such cuprous oxide nanoparticles on the Au-Cu alloy surface explains the low-temperature DSC and dilatometry anomaly and affects directly the surface electrical resistance at low temperature. These results might open a large gate for new ideas to investigate in catalytic, electronic, and antimicrobial activities.     

In Vitro Biomineralization and Bulk Characterization of Chitosan/Hydroxyapatite Composite Microparticles Prepared by Emulsification Cross-Linking Method: Orthopedic Use

Chitosan/hydroxyapatite composite microparticles were prepared by a solid-in-water-in-oil emulsification cross-linking method. The characteristics and activity in presence of simulated body fluid for 14 and 21?days were investigated. The size distribution, surface morphology, and microstructure of these biomaterials were evaluated. The scanning electron microscopy revealed an aggregate of microparticles with a particle size, ranged from 4 to 10???m. The deposited calcium phosphate was studied using X-ray diffraction analysis, Fourier transform infrared spectroscopy, and inductively coupled plasma/atomic emission?spectroscopy analysis of phosphorus. These results show that the mineral, formed on microparticles, was a mixture of carbonated hydroxyapatite and calcite. Scanning electron microscopy revealed that calcium phosphate crystals growth was in form of rods organized as concentric triangular packets interconnected to each other by junctions. Interaction between chitosan and growing carbonated hydroxyapatite and calcite crystals are responsible for a composite growth into triangular and spherical shapes. The results demonstrated that these microparticles were potential materials for bone repair.     

Influence of deposition conditions on the optical properties of erbium-doped yttrium oxide films grown by aerosol-UV assisted MOCVD

Erbium-doped Y₂O₃ films were prepared by aerosol-UV assisted metal-organic chemical vapour deposition (MOCVD) at 410 °C. The effects of humidity of carrier gas and UV-assistance on their structure and optical properties were investigated on the as-deposited and thermal annealed films using infrared spectroscopy, X-ray diffraction and transmission electron microscopy. It was found that the as-deposited Er:Y₂O₃ films crystallise in the Y₂O₃ cubic structure and present a very low organic contamination when the deposition takes place under high air humidity and, even better, with UV-assistance. After annealing, two different structural phases are observed corresponding to the cubic and the monoclinic structures of Y₂O₃. The Er³⁺ luminescence analysed in the visible and IR regions, shows the classical green transitions. The best optical properties were obtained with as-deposited and annealed Er:Y₂O₃ films grown under high air humidity with UV-assistance. Under such deposition conditions, ⁴I_13/2 lifetimes was found to be 3.07 and 6.1 ms for films annealed at 800 and 1000 °C, respectively, and up-conversion phenomena were underlined. This indicates that the deposition conditions, in particular air humidity, play an important role in the luminescent properties even after annealing.     

Estimating the Scale Parameter of a Lévy-stable Distribution via the Extreme Value Approach

The characteristic exponent α of a Lévy-stable law S _α (σ, β, μ) was thoroughly studied as the extreme value index of a heavy tailed distribution. For 1 < α < 2, Peng (Statist. Probab. Lett. 52: 255–264, 2001) has proposed, via the extreme value approach, an asymptotically normal estimator for the location parameter μ. In this paper, we derive by the same approach, an estimator for the scale parameter σ and we discuss its limiting behavior.      

Resolution approach for multi-objective problems with uncertain demands

The job-shop scheduling problem (JSP) is one of the hardest problems (NP-complete problem). In a lot of cases, the combination of goals and resource exponentially increases search space. The objective of resolution of such a problem is generally, to maximize the production with a lower cost and makespan. In this paper, we explain how to modify the objective function of genetic algorithms to treat the multi-objective problem and to generate a set of diversified “optimal” solutions in order to help decision maker. We are interested in one of the problems occurring in the production workshops where the list of demands is split into firm (certain) jobs and predicted jobs. One wishes to maximize the produced quantity, while minimizing as well as possible the makespan and the production costs. Genetic algorithms are used to find the scheduling solution of the firm jobs because they are well adapted to the treatment of the multi-objective optimization problems. The predicted jobs will be inserted in the real solutions (given by genetic algorithms). The solutions proposed by our approach are compared to the lower bound of the cost and makespan in order to prove the quality and robustness of our proposed approach.     

Computational insights about the dynamic behavior for the inclusion process of deprotonated and neutral aspirin in β-cyclodextrin

A high-efficiency microwave irradiation (MW) assisted protocol was proposed to synthesize series SPE-β-CD with specific degree of substitution (DS) in the sodium hydroxide solution. This protocol provided an eco-friendly way to modify the cyclodextrins with bulky sulfopropyl substituent on the purpose of avoiding organic solvents and high quantities of thermal energy. Temperature and energy distribution became more uniform under the new method accordingly. Therefore, not only the reaction time reduced significantly from over 20 h to a few hours, but also the DS increased up according to ¹H NMR spectroscopy, MS and elemental analysis results. Most importantly, the effects of reaction parameters on DS were compared both under MW method and conventional heating method, and were sufficiently studied to guarantee the aforementioned results could be better reproduced and DS of products could become more specific through the synthesis process. Products structures were characterized by FT-IR, DSC, and ¹³C NMR spectroscopy.     

Electronic and optical properties under pressure effect of alkali metal oxides

We report results of first-principles calculations for the electronic and optical properties under pressure effect of Li₂O, Na₂O, Ki₂O and Rb₂O compounds in the cubic antifluorite structure, using a full relativistic version of the full-potential augmented plane-wave plus local orbitals (FP-APW+lo) method based on density functional theory, within the local density approximation (LDA) and the generalized gradient approximation (GGA). Moreover, the alternative form of GGA proposed by Engel and Vosko (GGA-EV) is also used for band structure calculations. The calculated equilibrium lattices and bulk moduli are in good agreement with the available data. Band structure, density of states, and pressure coefficients of the fundamental energy gap are given. The critical point structure of the frequency dependent complex dielectric function is also calculated and analyzed to identify the optical transitions. The pressure dependence of the static optical dielectric constant is also investigated.     

Topology change from quantum instability of gauge theory on fuzzy CP

Many gauge theory models on fuzzy complex projective spaces will contain a strong instability in the quantum field theory leading to topology change. This can be thought of as due to the interaction between space–time via its noncommutativity and the fields (matrices) and it is related to the perturbative UV–IR mixing. We work out in detail the example of fuzzy CP²${\mathbf{CP}}^2$ and discuss at the level of the phase diagram the quantum transitions between the 3 spaces (space–times) CP²${\mathbf{CP}}^2$, S²${\mathbf{S}}^2$ and the 0-dimensional space consisting of a single point {0}$\{0\}$.