Determination of internuclear distances in uniformly labeled molecules by rotational-resonance solid-state NMR

Rotational-resonance magic-angle spinning NMR experiments are frequently used to measure dipolar couplings and to determine internuclear distances. So far most measurements were performed on samples containing isolated spin pairs. Thus, extensive structure elucidation, for example in biomolecules, requires the preparation of a whole set of doubly labeled samples. Here, we describe the analysis of the rotational-resonance polarization-exchange curves obtained from a single, uniformly labeled sample. It is shown experimentally that, at a magnetic field of 14.09 T, the rotational-resonance conditions in uniformly (13)C-labeled threonine are sufficiently narrow to permit the measurement of five distances between the four carbon spins with an accuracy of better than 10%. The polarization-exchange curves are analyzed using a modified two-spin model consisting of the two active spins. The modified model includes an additional offset in the final polarization, which comes from the coupling to the additional, passive, spins. The validity of this approach is experimentally verified for uniformly (13)C-labeled threonine. The broader applicability of such a model is demonstrated by numerical simulations which quantify the errors as a function of the most relevant parameters in the spin system.     

Comparative study of recent wide-pore materials of different stationary phase morphology, applied for the reversed-phase analysis of recombinant monoclonal antibodies

Various recent wide-pore reversed-phase stationary phases were studied for the analysis of intact monoclonal antibodies (mAbs) of 150 kDa and their fragments possessing sizes between 25 and 50 kDa. Different types of column technology were evaluated, namely, a prototype silica-based inorganic monolith containing mesopores of ～250 Å and macropores of ～?1.1 μm, a column packed with 3.6 μm wide-pore core-shell particles possessing a wide pore size distribution with an average around 200 Å and a column packed with fully porous 1.7 μm particles having pore size of ～300 Å. The performance of these wide-pore materials was compared with that of a poly(styrene–divinyl benzene) organic monolithic column, with a macropore size of approximately 1 μm but without mesopores (stagnant pores). A systematic investigation was carried out using model IgG1 and IgG2 mAbs, namely rituximab, panitumumab, and bevacizumab. Firstly, the recoveries of intact and reduced mAbs were compared on the two monolithic phases, and it appeared that adsorption was less pronounced on the organic monolith, probably due to the difference in chemistry (C18 versus phenyl) and the absence of mesopores (stagnant zones). Secondly, the kinetic performance was investigated in gradient elution mode for all columns. For this purpose, peak capacities per meter as well as peak capacities per time unit and per pressure unit (PPT) were calculated at various flow rates, to compare performance of columns with different dimensions. In terms of peak capacity per meter, the core-shell 3.6 μm and fully porous 1.7 μm columns outperformed the two monolithic phases, at a temperature of 60 °C. However, when considering the PPT values, the core-shell 3.6 μm column remained the best phase while the prototype silica-based monoliths became very interesting, mostly due to a very high permeability compared with the organic monolith. Therefore, these core-shell and silica-based monolith provided the fastest achievable separation. Finally, at the maximal working temperature of each column, the core-shell 3.6 μm column was far better than the other one, because it is the only one stable up to 90 °C. Lastly, the loading capacity was also measured on these four different phases. It appeared that the organic monolith was the less interesting and rapidly overloaded, due to the absence of mesopores. On the other hand, the loading capacity of prototype silica-based monolith was indeed reasonable.     

Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

聚(4-乙烯基吡啶)硫酸氢盐: 一个新的高效催化剂用于无溶剂条件下合成13-芳香基-茚并 [1,2-b] 石脑油 [1,2-e] 吡喃-12(13H)-酮（英文）

An facile and efficient protocol for the synthesis of 13‐aryl‐indeno[1,2‐b]naphtha[1,2‐e]pyran‐ 12(13H)‐ ones has been developed that proceeds via the one‐pot three‐component sequential reaction of an aromatic aldehyde with β‐naphthol and 2H‐indene‐1,3‐dione under solvent‐free conditions in the presence of a poly(4‐vinylpyridinium)hydrogen sulfate(P(4‐VPH)HSO4) catalyst. The catalyst can be reused several times, making this procedure facile, practical, and sustainable. The simple experimental procedure, solvent‐free reaction conditions, use of an inexpensive catalyst, short react time, and excellent yields are some of the major advantages of this methodology.     

二氧化硫脲:一锅合成吡喃并[4,3-b] 吡喃类化合物的高效可重复使用有机催化剂（英文）

A series of pyrano[4,3‐b]pyran derivatives have been synthesized in excellent yields by the reaction of aromatic aldehydes with malononitrile or cyanoacetate and 4‐hydroxy‐6‐methylpyran‐2‐one in water at 80 °C, with the transformation being catalyzed by an aqueous solution of thiourea dioxide(TUD). Upon completion of the reaction, the product was isolated by filtration or extraction and the remaining aqueous TUD solution could be reused several times without any discernible impact on its catalytic activity. This procedure offers several advantages over existing procedures, including high yields, operational simplicity, the use of a non‐toxic catalyst and solvent, short reaction time and minimum pollution of the environment, making it a useful and attractive process for the preparation of pyrano[4,3‐b]pyran derivatives.     

An eco-friendly catalytic route for one-pot synthesis of 2-amino-6-(2-oxo-2Hchromen-3-yl)-4-arylnicotinonitrile derivatives by silica-supported perchloric acid (HClO4–SiO2) under solvent-free conditions

A facile and environmentally benign synthesis of some 2-amino-6-(2-oxo-2H-chromen-3-yl)-4-arylnicotinonitrile derivatives from the reaction of 3-acetylcoumarin, aromatic aldehydes, and malononitrile under solvent-free condition in the presence of silica-supported perchloric acid (HClO₄–SiO₂) is described. The ability to reuse the catalyst, the high yields, and ease of purification are the important features of this process.     

Aqueous media preparation of 2-amino-4,6-diphenylnicotinonitriles using cellulose sulfuric acid as an efficient catalyst

A convenient approach to the synthesis of 2-amino-4,6-diphenylnicotinonitriles via four-component reaction of aromatic aldehydes, acetophenone derivatives, malononitrile and ammonium acetate is described. The reactions were done in water as solvent using cellulose sulfuric acid as catalyst. This simple protocol offer advantages such as shorter reaction times, simple work-up procedure, excellent yields and catalyst recovery.     

Suppression of radiative losses of surface polaritons on nanostructured thin metal films

The strong electromagnetic coupling between surface plasmon polariton modes on opposite interfaces of a finite thickness periodically nanostructured metal film has been studied. Surface polariton dispersion and associated electromagnetic field distributions have been analyzed. It was shown that at a frequency that corresponds to the crossing of film Bloch modes of different symmetries, the radiative losses of surface polaritons that are related to the polaritons' coupling to light during propagation on the structured surface are suppressed.     

Chlorkalkprüfung

Analytical and Bioanalytical Chemistry -     

Copper-mediated N- and O-arylations with arylboronic acids in a continuous flow microreactor: a new avenue for efficient scalability

A continuous flow procedure has been elaborated for the copper(II)-mediated N- and O-arylation of a range of compounds with arylboronic acids using a commercial microreactor setup. The compounds could be continuously generated in good yields paving the way for efficient scalability.