Mono-Aryl/Alkylthio-Substituted (Hetero)acenes of Exceptional Thermal and Photochemical Stability by the Thio-Friedel–Crafts/Bradsher Cyclization Reaction

The highly substituted mono-aryl/alkylthio-(hetero)acenes prepared in this study have been found to be thermally more stable (T_decomp.=331–354 °C) than the known di-aryl/alkylthio-substituted acenes by an average of 25 °C. They are also much more photostable at 254 and 365 nm (in both argon and air) than the parent anthracene and other reported anthracenes. The most photostable aryl/alkylthio-anthracenes at 254 nm were found to be 60–70 (in air) and 130 (in argon) times more stable in solution than the unsubstituted anthracene, and much more stable than known EDG/EWG-substituted anthracenes (EDG=electron-donating group, EWG=electron-withdrawing group) with an extended aromatic core. Furthermore, the acenes showed significantly higher photostability at 365 nm in both air and argon. The anthracenes were obtained by the novel thio-Friedel–Crafts/Bradsher cyclization reaction of hitherto unknown [o-(1,3-dithian-2-yl)aryl](aryl)methyl thioethers. The developed approach provides a general access to mono-aryl/alkylthio-substituted (hetero)acene frameworks containing at least three fused (hetero)aromatic rings. The characteristic feature of this approach, which leads to highly substituted acenes, is that the substituents, unlike in other methods, may be introduced at an early stage of the synthesis. DFT and TD-DFT calculations confirmed the stabilizing role of the aryl/alkylthio substituent in the mono-aryl/alkylthio-substituted anthracenes, which are the most stable anthracenes prepared to date. Their high photostability is mainly due to the quenching of singlet oxygen by the acene and the quenching of the acene S₁ state by molecular oxygen.     

Randomization helps to perform independent tasks reliably

This paper is about algorithms that schedule tasks to be performed in a distributed failure‐prone environment, when processors communicate by message‐passing, and when tasks are independent and of unit length. The processors work under synchrony and may fail by crashing. Failure patterns are imposed by adversaries. Linearly‐bounded adversaries may fail up to a constant fraction of the processors. Weakly‐adaptive adversaries have to select, prior to the start of an execution, a subset of processors to be failure‐prone, and then may fail only the selected processors, at arbitrary steps, in the course of the execution. Strongly adaptive adversaries have a total number of failures as the only restriction on failure patterns. The measures of complexity are work, measured as the available processor steps, and communication, measured as the number of point‐to‐point messages. A randomized algorithm is developed, that attains both ??(n log*n) expected work and ??(n log*n) expected communication, against weakly‐adaptive linearly‐bounded adversaries, in the case when the numbers of tasks and processors are both equal to n. This is in contrast with performance of algorithms against strongly‐adaptive linearly‐bounded adversaries, which has to be Ω(n log n/log log n) in terms of work. © 2003 Wiley Periodicals, Inc. Random Struct. Alg., 2004     

57Fe Mössbauer Study of One-Hour Annealing in Argon of Radiation Damage in Metamict Gadolinite from Ytterby

Hyperfine Interactions - Gadolinite, REE2FeBe2Si2O10, belongs to the group of metamict minerals. Metamict minerals incorporate uranium and thorium in their structures. Alpha-decays of uranium and...     

The effect of fluorine-based plasma treatment on morphology and chemical surface composition of biocompatible silicone elastomer

X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) have been used to investigate the effect of reactive ion etching (RIE) on poly(methylhydrogensiloxane-co-dimethylsiloxane) surface in fluorine-based plasmas. Polysiloxane layers supported on the standard silicon wafers were etched using SF₆ + O₂ or CF₄ + O₂ plasmas. SEM studies show that the polysiloxane morphology depends on plasma chemical composition strongly. Presence of a columnar layer likely covered with a fluorine rich compound was found on the elastomer surface after the CF₄ + O₂ plasma exposure. After the SF₆ + O₂ or CF₄ + O₂ plasma treatment the polysiloxane surface enriches with fluorine or with fluorine and aluminum, respectively. Different morphologies and surface chemical compositions of the silicone elastomer etched in both plasmas indicate different etching mechanisms.     

Structure and Magnetic Properties of Ce3Ge0.66In4.34 and Ce11Ge4.74In5.26

New indides Ce₃Ge_0.66In_4.34 and Ce₁₁Ge_4.74In_5.26 were synthesized from the elements by arc‐melting and subsequent annealing at 870 K. Single crystals were grown through special annealing procedures in sealed tantalum tubes in a high‐frequency furnace. Both compounds were investigated on the basis of X‐ray powder and single crystal data: I4/mcm, La₃GeIn₄ type, a = 848.8(1), c = 1192.0(2) pm, Z = 4, wR2 = 0.0453, 499 F² values, 17 variables for Ce₃Ge_0.66In_4.34 and I4/mmm, Sm₁₁Ge₄In₆ type (ordered version of the Ho₁₁Ge₁₀ type), a = 1199.3(2), c = 1662.0(3) pm, wR2 = 0.0507, 1217 F² values, 41 variables for Ce₁₁Ge_4.74In_5.26. The Ce₃Ge_0.66In_4.34 structure shows a mixed Ge/In occupancy on the 4c Wyckoff position. This site is octahedrally coordinated by cerium atoms. These octahedra share all edges, leading to a three‐dimensional network. The latter is penetrated by a two‐dimensional indium substructure which consists of flattened tetrahedra at In–In distances of 291 and 300 pm. The Ce₁₁Ge_4.74In_5.26 structure contains three crystallographically independent germanium sites. The latter are coordinated by eight or nine cerium neighbors. These CN8 and CN9 polyhedra are condensed to a complex network which is penetrated by a three‐dimensional indium network with In–In distances of 301–314 pm. The 16m site shows a mixed In/Ge occupancy. Chemical bonding in both compounds is dominated by the p elements. Both ternaries studied exhibit localized magnetism due to the presence of Ce³⁺ ions. The compound Ce₃GeIn₄ remains paramagnetic down to 1.72 K, whereas Ce₁₁Ge₄In₆ orders ferromagnetically at T_C = 7.5 K.     

Acyclic congener of cucurbituril: synthesis and recognition properties

The cucurbit[n]uril (CB[n]) family of macrocycles occupies a prominent role in molecular recognition and self-assembly studies despite the current inability to access specific cucurbit[n]uril homologues, derivatives, and analogues by straightforward tailor-made synthetic procedures. In this paper, we explore an approach that circumvents the challenges posed by the tailor-made synthesis of macrocyclic CB[n] by preparing 1, which functions as an acyclic CB[6] congener. The o-xylylene connections to the glycoluril rings preorganize 1 into the (a,a,a,a)-1 conformation required for binding and reduce its tendency to undergo self-association. We surveyed the binding properties of 1 toward 16 amines (K(a) 相似文献   

New evidence on the structure of potassium salts of 12-tungstophosphoric acid, KxH3-xPW12O40

Physicochemical properties and compositions of KxH(3-x)PW12O40 salts, where 2 < or = x < or = 3, have been investigated. It has been found that freshly prepared K2HPW12O40 salt (drying at 313 K) contains particles of heteropolyacid and particles of the neutral potassium salt, the sample being in 78.6% amorphous. On aging at room temperature, the heteropolyacid spreads to form a surface layer covering the neutral potassium salt particles K3PW12O40. Heat treatment of KxH(3-x)PW12O40 salts, where 2 < or = x < 3, from 313 K to higher temperatures induces the transformation of the heteropolyacid-covering K(3) core into a well-dispersed, amorphous surface layer. On further heating of the acidic potassium salts, the surface layer decomposes between 855 and 915 K with the formation of a PW8O26-type bronze as a new phase, the K3PW12O40 salt remaining unchanged. The latter starts to decompose at 1093 K, and in the case of all samples, the process is completed at about 1183 K. Rietveld structure refinement, XPS, and 31P NMR measurements of acidic potassium salts indicate that the core of these salts is always formed by the K3PW12O40 salt, which is covered by a heteropolyacid. Comparison of lattice parameters of the K3 salt and HPW leads to the conclusion that the layer is composed of partially or completely dehydrated heteropolyacid molecules. The coverage of the core by HPW in the K2 sample was estimated to be equal to one monolayer.     

The maximal monotonicity of the subdifferentials of convex functions: Simons' problem

In the paper we deal with the problem when the graph of the subdifferential operator of a convex lower semicontinuous function has a common point with the product of two convex nonempty weak and weak^* compact sets, i.e. when graph (Q × Q ^*) 0. The results obtained partially solve the problem posed by Simons as well as generalize the Rockafellar Maximal Monotonicity Theorem.