含铈类水滑石的制备及其衍生物催化研究

采用共沉淀水热法制备了镍铝铈三元复合层状氢氧化物.详细探讨了合成体系pH值、Ce/Al比及陈化条件对合成产物物相的影响;通过XRD,ICP,TG-DTA手段研究了合成物物相、组成及热行为.考察了以合成物为前驱体经焙烧后转化为镍铝铈复合金属氧化物在催化消除NO反应中的应用.实验结果表明,合成镍铝铈三元复合层状氢氧化物的适宜条件是:M2 /M3 =2,Ce/Al=0.07～0.75,pH=5.5～6.9,水热处理条件为110℃,5 h;在pH=5.5～6.9条件下,合成原料配比不同,产物物相相同,但组成不同;合成物热稳定性较差,在T=100～400℃之间,层间吸附水及层间平衡阴离子NO3-脱去,转化为复合氧化物,将此氧化物应用于NO消除反应中,表现出高的低温活性,400℃进行反应,NO转化率达95%,N2选择性几乎100%.     

Controlled peak wavelength shift of Ca1−xSrx(SySe1−y):Eu phosphor for LED application

The highly efficient red-orange-yellow-emitting phosphor (Ca_1−xSr_x)(S_1−ySe_y):Eu²⁺ in combination with commercial green phosphor SrGa₂S₄:Eu²⁺ and blue LED are proposed for a three-band white LED. The luminescence mechanism and optimization parameters are discussed on the basis of proposed peak wavelength diagram.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Synthesis of fluoride garnets {Na3}[M3+2](Li3)F12 (M = Al,Cr, and Fe) from aqueous solution and their properties

The garnet-type fluorides, Na₃M₂Li₃F₁₂ (M = Al, Cr, and Fe) were synthesized as the coprecipitates of ～1 to 10 μm powders from HF solutions. The garnet structures were always obtained under acidic conditions. The incorporation of water molecules into the structure of the Cr and Fe garnets was observed. After heat treatment at 300°C, very small unknown peaks were observed in the X-ray powder pattern in addition to the garnet phase which had a slightly smaller value of the lattice constant than that of hydrous garnets. From the measurement of magnetic properties and Mössbauer effects, the Fe and Cr garnets were found to be paramagnetic with both ions in the trivalent state. Presentation of infrared spectra of the garnets is also included.     

Cationic ring-opening transfer polymerization of spiro ortho esters initiated by carbon black

The ring-opening transfer polymerization of spiro ortho esters (SOE) initiated by carbon black was investigated. In the absence of carbon black, no polymerization occurred at all. In the presence of channel black containing carboxyl group, the ring-opening transfer polymerization of SOE was initiated at 50-70°C. to give polyether ester, namely alternating copolymer of epoxide and lactone. The rate of polymerization of 1,4,6-trioxaspiro[4.4]nonane and 1,4,6-trioxaspiro[4.5]decane was considerably small compared with that of 1,4,6-trioxaspiro[4.6]undecane. The activation energy of the polymerization of 2-chloromethyl-1,4,6-trioxaspiro[4.6]undecane was estimated to be 6.0 kcal/mol. The initiating activity of carbon black increased with an increase in carboxyl group content of carbon black. Furnace black that contained no carboxyl group was unable to initiate the polymerization. Furthermore, the carbon black lost the initiating ability of the polymerization upon the blocking of carboxyl group on the surface by the treatment with potassium hydroxide or diazomethane. Based on these results, it was concluded that carboxyl group on carbon black plays an important role in the initiation. During the polymerization, a part of the polymer formed was grafted onto carbon black: the grafting ratio was 10–30%. The mechanisms of initiation and grafting were discussed.     

Spectrophotometric and thermal analytical studies on the dehydration of copper(II) sulfate and its double salts

Spectrophotometric (diffuse reflection) and TG-DTA data on the dehydration of CuSO₄ · 5H₂O, Na₂Cu(SO₄)₂ · 2H₂O, M₂Cu(SO₄)₂ · 6H₂O(M⁺ = K⁺, Rb⁺, Cs⁺ and NH⁺₄) and Co₂Cu(SO₄)₃ · 18H₂O are given. Although complete dehydration of CuSO₄ · 5H₂O brings about a striking color change from blue to white, it was found that there is only a slight decrease in the v?_max. of its d-d band in the course of this change, and the total light absorption in the visible-UV region increases at the same time. The dehydration of the alkali metal and ammonium double salts, most of which contain [Cu(OH₂)₆]²⁺ aquo ions (in contrast to the [Cu(OH₂)₄]²⁺ in CuSO₄ · 5H₂O), occurs generally more easily than that of CuSO₄ - 5H₂O, and their v?_max. increases slightly in the change, leading to blue or green anhydrous products, although the formation of a white modification was observed with the potassium salt. It was also found that the v?_max. of the Cu²⁺ ion in the dehydrated cobalt(II) double salt is still lower than that in anhydrous CuSO₄, i.e., the ligand field and/or tetragonality around it is decreased by the presence of Co²⁺ ions.     

Determination of kynurenic acid levels in rat brain microdialysis samples and changes in kynurenic acid levels induced by N‐acetylaspartic acid

The levels of kynurenic acid, an endogenous antagonist of α₇ nicotinic acetylcholine and N‐methyl‐D ‐aspartate receptors, were measured in microdialysis samples obtained from the prefrontal cortices of rats using column‐switching high‐performance liquid chromatography with fluorescence detection. When the perfusate was constantly infused at a rate of 1.0 μ/min, the in vitro recovery of kynurenic acid through the dialysis membrane was approximately 20.4%, and the precision was within 1.31%. Endogenous kynurenic acid in the microdialysis sample was clearly detected using column‐switching high‐performance liquid chromatography. As an application study, N‐acetyl‐L ‐aspartic acid, an endogenous metabolite and precursor of N‐acetyl‐L ‐aspartyl‐L ‐glutamic acid, which is an agonist of metabotropic glutamate receptors, was infused for 120 min through the microdialysis probe. The kynurenic acid level significantly increased during the infusion of N‐acetyl‐L ‐aspartic acid, suggesting that kynurenic acid might have some association with N‐acetyl‐L ‐aspartic acid in vivo. Copyright © 2009 John Wiley & Sons, Ltd.     

Analysis of cigarette smoke by an online thermal desorption system and multidimensional GC-MS

Single puffs of cigarette smoke with a wide continuous range of volatility are directly analyzed using a new system. The system consists of a smoking machine, an online thermal desorption system (TDS), and a multidimensional gas chromatograph-mass spectrometer (MDGC-MS) system. The online TDS with the smoking machine collects the single-puff cigarette smoke with glass beads as the cryogenic adsorbent. The MDGC is composed of three capillary columns, Poraplot Q, and DB-WAX for separation and a deactivated capillary column for pressure balance, which enables simultaneous separation of the two different phases. The smoke desorbed from the TDS is divided into vapor and semivolatile phases and analyzed individually with each column by the MDGC. Thus, the system enables the overall analysis of the two phases simultaneously, including acetaldehyde and 1,4-benzenediol. This system also provides more appropriate analysis for compounds crossing the two phases such as toluene and pyridine. For the approach of introducing internal standards, a gas mixture of toluene-d(8) and o-xylene-d(10) is applied and the compounds are detected in the vapor and semivolatile phases, respectively.     

Evaluations of vertical resolution of conductive polymer three-dimensional microstructures photofabricated in transparent polymer sheet

Conductive polymer three-dimensional microstructures were photofabricated utilizing the two-photon absorption of a sensitizer dye. The resulting three-dimensional structures were excised from the transparent polymer sheet using a micro-manipulator. The processing precisions for the vertical direction of the conductive polymer three-dimensional microstructure obtained in the transparent polymer sheet were evaluated in the present study. As a result, for the configurations of the obtained polypyrrole line deposition, the line height/line width ratios were around 5: 1; this ratio is higher than that of other UV resin works (h: w 2:4–3: 1) and the cross section distortion is not negligible for maintaining the higher reproducibility of the photofabrication.