Study of flame-retardant finishing of cellulose fibres: Organic–inorganic hybrid versus conventional organophosphonate

The aim of this study was to introduce a non-formaldehyde inorganic–organic hybrid sol–gel flame-retardant precursor (SiOP) containing phosphorous, nitrogen, and silicon and to compare its functional properties with those of the conventional formaldehyde-containing organic flame-retardant agent, organophosphonate (OP). SiOP was used at concentrations of 2%, 4%, and 8%, and OP was used at a concentration of 200 g/dm³. Both agents were applied to 100% cotton (CO) woven fabric by the pad-dry-cure method under the appropriate conditions. The presence of the SiOP and OP coatings on the CO fabric was confirmed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The results of the vertical tests of flammability and the thermogravimetric analyses showed that the presence of the SiOP coating changed the thermal degradation pathway of the CO fabric and resulted in an increase in the thermo-oxidative stability of the cellulose fibres. The thermo-oxidative stability was enhanced by the addition of higher amount of dry solids. At comparable dry solids contents, OP preserved significantly greater flame retardancy and thermo-oxidative stability than did SiOP. These results indicated that the SiOP precursor could not act as an effective alternative to the OP agent in the flame-retardant protection of CO fabric.     

Twist-grain boundary phase induced by Au nanoparticles in a chiral liquid crystal host

We report on the stabilisation of the liquid-crystalline, twist-grain boundary A (TGB_A) phase in mixtures of a chiral liquid crystal and surface-functionalised spherical Au nanoparticles (NPs) of 10 nm diameter. The results, obtained by calorimetric, optical, small-angle X-ray and plasmon resonance measurements, demonstrate that a TGB_A phase, which is metastable for the pure liquid crystal host, can be effectively stabilised for a 3 K range in the presence of NPs. Moreover, the role of NPs size on the TGB_A stabilisation is briefly discussed.     

Novel multifunctional water- and oil-repellent,antibacterial, and flame-retardant cellulose fibres created by the sol–gel process

This research aimed to prepare cotton fibres with novel multifunctional water- and oil-repellent, antibacterial, and flame-retardant properties. A three-component equimolar sol mixture, which included 1H,1H,2H,2H-perfluorooctyltriethoxysilane, 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride, and P,P-diphenyl-N-(3-(trimethoxysilyl)propyl) phosphinic amide, was applied to the cotton fabric using the sol–gel process. The presence of the coating on the cotton fibres was confirmed by Fourier transform-infrared spectroscopy and X-ray photoelectron spectroscopy. The functional properties of the coated cotton fabric were determined from liquid contact angle measurements and antibacterial activity, burning behaviour, and thermo-oxidative stability studies. The results demonstrate that a unique, compatible, and uniform organic-inorganic hybrid polymer network was formed on the fabric surface, which preserved its simultaneous hydrophobic (water contact angle of 135 ± 2°), oleophobic (n-hexadecane contact angle of 117 ± 1°), and bactericidal (bacterial reduction of 100 %) properties and incorporated the enhanced thermo-oxidative stability of the modified cellulose fibres.     

Blue phase III widening in CE6-dispersed surface-functionalised CdSe nanoparticles

The phase transition behaviour of the chiral liquid crystal CE6 doped with spherical surface-functionalised CdSe nanoparticles has been examined by means of high-resolution adiabatic scanning calorimetry and polarising microscopy. The addition of nanoparticles results in an essentially stabilised blue phase III. The phase diagram is displayed upon heating and cooling and the enthalpy changes involved in the conversion between the blue phases are determined. The dispersion of functionalised nanoparticles is prominent for the stabilisation of blue phase III, which is potentially useful for applications, especially if applied on liquid crystals that exhibit blue phases close to room temperature.     

Experimental and Theoretical Studies of Bromination of Diethyl 2,4,6‐Trimethyl‐1,4‐dihydropyridine‐3,5‐dicarboxylate

A reaction of diethyl 2,4,6‐trimethyl‐1,4‐dihydropyridine‐3,5‐dicarboxylate with 1, 2, and more equivalents of N‐bromosuccinimide (NBS) in methanol was investigated by NMR spectroscopy at a temperature interval ranging from 25 to 40°C. The reaction was found to proceed through several steps. The structures of the intermediates diethyl 3‐bromo‐2,4,6‐trimethyl‐3,4‐dihydropyridine‐3,5‐dicarboxylate, diethyl 3‐bromo‐2‐methoxy‐2,4,6‐trimethyl‐1,2,3,4‐tetrahydropyridine‐3,5‐dicarboxylate, and diethyl 3,5‐dibromo‐2‐methoxy‐2,4,6‐trimethyl‐2,3,4,5‐tetrahydropyridine‐3,5‐dicarboxylate were identified by multinuclear (¹H, ¹³C, and ¹⁵N) NMR spectral data. The optimal structures of all species participating in the reaction as well as changes in their relative energies along with the proposed pathway of the reaction were analyzed by quantum‐chemical calculations. The mechanism of bromination of diethyl 2,4,6‐trimethyl‐1,4‐dihydropyridine‐3,5‐dicarboxylate with NBS in methanol was found to favor the bromination in the 2,6‐methyl side chains as the only products in full agreement with experimental observations.     

Proton Diffusion andT1Relaxation in Polyacrylamide Gels: A Unified Approach Using Volume Averaging

The structure of polyacrylamide gels was studied using proton spin–lattice relaxation and PFG diffusion methods. Polyacrylamide gels, with total polymer concentrations ranging from 0.25 to 0.35 g/ml and crosslinker concentrations from 0 to 10% by weight, were studied. The data showed no effect of the crosslinker concentration on the diffusion of water molecules. The Ogston–Morris and Mackie–Meares models fit the general trends observed for water diffusion in gels. The diffusion coefficients from the volume averaging method also fit the data, and this theory was able to account for the effects of water-gel interactions that are not accounted for in the other two theories. The averaging theory also did not require the physically unrealistic assumption, required in the other two theories, that the acrylamide fibers are of similar size to water molecules. Contrary to the diffusion data,T₁relaxation measurements showed a significant effect of crosslinker concentration on the relaxation of water in gels. The model developed using the Bloch equations and the volume averaging method described the effects of water adsorption on the gel medium on both the diffusion coefficients and the relaxation measurements. In the proposed model the gel medium was assumed to consist of three phases (i.e., bulk water, uncrosslinked acrylamide fibers, and a bisacrylamide crosslinker phase). The effects of the crosslinker concentration were accounted for by introducing the proton partition coefficient,K^eq, between the bulk water and crosslinker phase. The derived relaxation equations were successful in fitting the experimental data. The partition coefficient,K^eq, decreased significantly as the crosslinker concentration increased from 5 to 10% by weight. This trend is consistent with the idea that bisacrylamide tends to form hydrophobic regions with increasing crosslinker concentration.     

Thermal Pretreatment of Harvest Residues and Their Use in Anaerobic Co-digestion with Dairy Cow Manure

Several batch experiments were conducted on the anaerobic co-digestion of dairy cow manure (DCM) with three harvest residues (HR) (soybean straw, sunflower stalks, and corn stover). The influence of thermal pretreatment of HR on biogas production was investigated, where the HR were thermally pretreated at two different temperatures: T = 121 °C and T = 175 °C, during t = 30 and t = 90 min, respectively. All anaerobic co-digestion batch experiments were performed simultaneously under thermophilic regime, at T = 55 °C. Biogas and methane yields were significantly improved in experiments performed with corn stover thermally pretreated at 175 °C for 30 min (491.37 cm³/g VS and 306.96 cm³/g VS, respectively), if compared to experiments performed with untreated corn stover. The highest VS and COD removal rates were also observed in the same group of experiments and were 34.5 and 50.1%, respectively. The highest biogas and methane yields with soybean straw (418.93 cm³/g VS and 261.44 cm³/g VS, respectively) were obtained when soybean straw pretreated at 121 °C during 90 min. The highest biogas and methane yields with sunflower stalk (393.28 cm³/g VS and 245.02 cm³/g VS, respectively) were obtained when sunflower stalk was pretreated at 121 °C during 90 min.     

Antimicrobial cotton fibres prepared by in situ synthesis of AgCl into a silica matrix

Functional antimicrobial cotton fibres were prepared in a novel two-step procedure utilising the pad-dry-cure method to apply an inorganic–organic hybrid sol–gel precursor (reactive binder, RB) followed by the in situ synthesis of AgCl particles on the RB-treated fibres. The morphology and surface composition of the modified cotton fibres were investigated by scanning electron microscopy imaging and X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy spectral analyses. The bulk concentration of Ag on the cotton fibres was determined by inductively coupled plasma mass spectroscopy, and the antimicrobial activity against the bacteria Escherichia coli and Staphylococcus aureus was estimated according to the ISO 20645:2004 (E) and AATCC 100-1999 methods. The results showed that this application process yields the following important benefits: (1) the presence of the RB silica matrix increased the fibres’ capacity for adsorbing AgCl particles compared with the same fibres without RB; (2) the in situ synthesis enabled a simple and environmentally friendly preparation of AgCl particles from AgNO₃ and their embedment into the fibres; (3) the AgCl particles were bound to the RB silica matrix by physical forces, which allowed for their controlled release from the fibres; (4) the capacity of the RB-modified cotton samples to hold embedded AgCl particles was sufficient to provide a 100 % bacterial reduction even after 10 repeated washing cycles; and (5) the chemical modification of the cotton fibres did not significantly change their whiteness, wettability or softness.