Metallo‐supramolecular block copolymer micelles: Improved preparation and characterization

Micelles prepared from amphiphilic block copolymers in which a poly(styrene) segment is connected to a poly(ethylene oxide) block via a bis‐(2,2′:6′,2″‐terpyridine‐ruthenium) complex have been intensely studied. In most cases, the micelle populations were found to be strongly heterogeneous in size because of massive micelle/micelle aggregation. In the study reported in this article we tried to improve the homogeneity of the micelle population. The variant preparation procedure developed, which is described here, was used to prepare two “protomer”‐type micelles: PS₂₀‐[Ru]‐PEO₇₀ and PS₂₀‐[Ru]‐PEO₃₇₅. The dropwise addition of water to a solution of the compounds in dimethylformamide was replaced by the controlled addition of water by a syringe pump. The resulting micelles were characterized by sedimentation velocity and sedimentation equilibrium analyses in an analytical ultracentrifuge and by transmission electron microscopy of negatively stained samples. Sedimentation analysis showed virtually unimodal size distributions, in contrast to the findings on micelles prepared previously. PS₂₀‐[Ru]‐PEO₇₀ micelles were found to have an average molar mass of 318,000 g/mol (corresponding to 53 protomers per micelle, which is distinctly less than after micelle preparation by the standard method) and an average hydrodynamic diameter (d_h) of 18 nm. For PS₂₀‐[Ru]‐PEO₃₇₅ micelles, the corresponding values were M = 603,000 g/mol (31 protomers per micelle) and d_h = 34 nm. The latter particles were found to be identical to the “equilibrium” micelles prepared in pure water. Both micelle types had a very narrow molar mass distribution but a much broader distribution of s values and thus of hydrodynamic diameters. This indicates a conformational heterogeneity that is stable on the time scale of sedimentation velocity analysis. The findings from electron microscopy were in disagreement with those from the sedimentation analysis both in average micelle diameter and in the width of the distributions, apparently because of imperfections in the staining procedure. The preparation procedure described also may be useful in micelle formation from other types of protomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4458–4465, 2004     

Influence of strain on the magneto-exciton in single and coupled InP/GaInP quantum disks

We investigated theoretically the influence of strain on the exciton in both single and three vertically coupled self-assembled quantum dot systems in the presence of a perpendicular magnetic field. For the single disk, we find that the heavy-hole exciton is the ground state, while for the system of three stacked disks, the light hole state was found to be lower in energy. Results for the diamagnetic shift were compared with experimental results.     

Metallo‐supramolecular micelles: Studies by analytical ultracentrifugation and electron microscopy

In aqueous solutions, amphiphilic block copolymers in which a polystyrene (PS) segment is connected to a poly(ethylene oxide) (PEO) block via a bis(2,2′:6′,2″‐ terpyridine ruthenium) complex can form micelles. Such micelles of the protomer type PS₂₀‐[Ru]‐PEO₇₀, according to the preparation procedure representing frozen micelles, were studied by sedimentation velocity and sedimentation equilibrium analysis in an analytical ultracentrifuge and by transmission electron microscopy, with different techniques applied for the sample preparation. The particles obtained were surprisingly multifarious in size. In ultracentrifugation experiments performed at relatively low salt concentrations, the distributions of the sedimentation coefficient s_20,w showed a pronounced peak at 9.6 S and a broad, only partly separated second peak around 14 S. The molar mass of the particles at the peak was around 430,000 g/mol, corresponding to an aggregation number of approximately 85. The average hydrodynamic diameter of the particles in the peak fraction was approximately 13 nm. In electron micrographs of negatively stained samples, spheres of diameters between 10 and 25 nm were the most abundant particles, but larger ones with a wide size range were also visible. The latter particles apparently were composed of smaller ones. The data from both sedimentation analysis and electron microscopy showed that (1) the studied compound formed primary micelles of diameters around 20 nm and (2) the primary micelles had a tendency toward aggregation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3159–3168, 2003     

Complete structure determination of the astrophysically important nucleus Na below the proton threshold

The fusion–evaporation reaction ¹⁰B(¹²C, 2n) was used to make the first observation of in-beam γ decays from the astrophysically important nucleus ²⁰Na, lying adjacent to the proton drip-line. All states below the proton threshold in ²⁰Na were populated and identified in the experiment. These include new levels, previously unresolved levels, and states located with improved energy precision. The level structure of ²⁰Na, and its γ transitions, are compared to the mirror partner ²⁰F measured simultaneously in this experiment. In particular, a high degree of energy stability is found for all negative parity states. These results are discussed in the context of the nuclear shell model.     

Evolution of shapes in 59Cu

High-spin states in ⁵⁹Cu were populated using the fusion-evaporation reaction ²⁸Si + ⁴⁰Ca at a beam energy of 122 MeV. The Gammasphere Ge-detector array in conjunction with the 4π charged-particle detector array Microball allowed for the detection of γ-rays in coincidence with evaporated light particles. The resulting extensive high-spin decay scheme of ⁵⁹Cu is presented, which comprises more than 320 γ-ray transitions connecting about 150 excited states. Their spins and parities have been assigned via directional correlations of γ-rays emitted from oriented states. Average quadrupole moments of rotational bands have been determined from the analysis of residual Doppler shifts. Shell model calculations in the fp shell are invoked to study some of the low-spin states, while the experimental characteristics of the rotational bands are analyzed in the configuration-dependent cranked Nilsson-Strutinsky (CNS) approach. Received: 15 February 2002 / Accepted: 23 April 2002     

Level structure of 68 149 Er81 and high-spin isomerism in proton-richN=81, 82, 83 nuclei

The level structure of theN=81 nucleus¹⁴⁹Er has been studied by γ-ray spectroscopy following the reaction⁹²Mo+255 MeV⁶⁰Ni. Yrast levels in¹⁴⁹Er are established up to ~3.3 MeV, including 0.61 and 4.8 μs isomeric states. Most of the observed levels are interpreted as seniority-three states arising from the coupling of s_1/2, d_3/2 and h_11/2 neutron holes with πh ₁₁ ^2/n . Isomers identified in the reaction⁹⁶Ru+255 MeV⁵⁸Ni are tentatively assigned to¹⁵¹Yb. TheB (E2) values of high-spin isomers inZ=66?70,N=81?83 nuclei are surveyed.     

Implementation of an expert system for the qualitative interpretation of X-ray fluorescence spectra

The implementation of an expert system for the automated qualitative interpretation of energy-dispersive x-ray spectra is discussed. The first step in the interpretation process is the extraction of the relevant data from the spectrum, which is done by a preprocessor program, written in FORTRAN. The expert system itself consists of three parts. The knowledge base contains specific information on energy-dispersive x-ray fluorescence spectrometry presented in the form of IF/THEN rules. The data base contains the reduced spectral data and an array of certainty factors associated with each element; the certainty factor for an element represents the probability of its being present in the sample from which the spectrum was taken. Finally, the inference engine performs manipulation of the knowledge. For a particular state of the data base, the certainty factors for all the elements are iteratively modified until convergence is reached by using the rules from the knowledge base. During each cycle, the inference engine selects one rule from the knowledge base and executes it. Rules are selected on the basis of the chemical elements contained in their IF part and according to their previously assigned focus levels. Execution of the THEN part of the selected rule modifies the certainty factors of a number of elements. At the end of the interpretation session, the system lists the elements which have a high probability of being present in the sample. Optionally, the user can be provided with explanations of the reasoning steps taken during the interpretation. Application of the expert system to a particular spectrum shows that it is useful for the reliable interpretation of spectral data obtained from electron microprobe analysis of industrial aerosol particles.     

Positive confirmation of identity of doping agents using gas chromatography-mass spectrometry with Fourier transform infrared spectrometry

During the past two decades, the use of retention times in gas chromatography has been augmented by mass spectrometric data. By providing both the retention indices and spectrometric data, this technique has greatly improved gas chromatographic identification analysis. However, although gas chromatography-mass spectrometry has become pre-eminent, several drawbacks still remain. The mass spectral library often gives erroneous identifications when concentrations near the detection limit are analysed, when gas chromatographically interfering substances are present, or when structural isomers or compounds exhibiting identical retention behaviour are analysed. Linked with gas chromatography-mass spectrometry, Fourier transform infrared spectroscopy can be a powerful complementary technique in peak identification analysis. Some spectral data to illustrate this point are presented.     

Synthesis of cyclic (alpha(2)beta)-tripeptides as potential peptide turn mimetics

[reaction: see text] The solid-supported synthesis followed by cyclization in solution of cyclic (alpha(2)beta)-tripeptides, potential peptide beta-turn mimetics, is described. The cyclization takes advantage of facilitating the rotation between trans- and cis-rotamers of two amide bonds. The method is amenable to combinatorial approaches as is illustrated by the synthesis of a small array of cyclic (alpha(2)beta)-tripeptides.