Ion synthesis and laser annealing of Cu nanoparticles in Al2O3

Al₂O₃ samples with Cu nanoparticles, synthesised by ion implantation at 40 keV with a dose of 1×10¹⁷ ion/cm² and a current density from 2.5 to 12.5 μA/cm², were annealed using ten pulses from a KrF excimer laser with a single pulse fluence of 0.3 J/cm². The copper depth distribution, formation and modification of metal nanoparticles under the ion implantation and laser treatment were studied by Rutherford backscattering (RBS), energy dispersive X-ray (EDX) analysis, atomic force microscopy (AFM) and optical spectroscopy. It was found that laser annealing leads to a reduction in the nanoparticle size without diffusion of metal atoms into the bulk. The change in particle size and the possibility for oxidation of the copper particles are examined in the framework of Mie theory. Calculations presented show that under excimer laser treatment, Cu nanoparticles are more likely to be reduced in size than to undergo oxidation. Received: 19 April 2001 / Accepted: 7 November 2001 / Published online: 23 January 2002     

Aluminum(III) complexes containing O,O chelating ligand

The stoichiometric reactions of trimethylaluminum with 2,6‐(MeOCH₂)₂C₆H₃OH (LH) revealed compounds L₃Al ( 1 ) and L₂AlMe ( 2 ). On the other hand reaction of 1 equiv. of LH with trimethylaluminum did not lead to the formation of complex LAlMe₂ ( 3 ), rather 2 together with Me₃Al were observed as a result of a disproportionation of 3 . Compounds 1 and 2 were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy and in the case of 1 by X‐ray diffraction. Derivative 2 underwent transmetalation with Ph₃SnOH, giving LSnPh₃ ( 4 ) as the result of a migration of ligand L from the aluminum to the tin atom. The identity of 4 was established by elemental analysis, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy and ¹H, ¹¹⁹Sn HMBC experiments. The system 2 and B(C₆F₅)₃ in a 1:1 molar ratio was shown to be active in the polymerization of propylene oxide and ε‐caprolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

NMR spectroscopic study of the inclusion complex of desloratadine with β-cyclodextrin in solution

Desloratadine (DES) is an antihistamine used in the treatment of allergies and chronic urticaria. ¹H NMR spectroscopic study of varying ratios of DES and β-Cyclodextrin (β-CD) in D₂O suggests the formation of a 1:1 inclusion complex formed by the penetration of Cl-substituted aromatic ring into the β-CD cavity. The stoichiometry and binding constant of the complex were determined by Scott’s method.     

Complexation of Fluvastatin Sodium with β-Cyclodextrin: NMR Spectroscopic Study in Solution

¹H NMR spectroscopic study of fluvastatin sodium (FLU), β-Cyclodextrin (β-CD) and their mixtures confirmed the formation of FLU/β-CD inclusion complex in solution. The stoichiometry of the complex was determined to be 1:1 and the overall binding constant (K _s) was calculated to be 340 M⁻¹. Two dimensional COSY, ROESY and DEPTO experiments were performed for the unambiguous assignment of aromatic proton resonances and it was found that two isomeric forms of FLU are present in solution. It was confirmed with the help of ROESY spectral data that only F-substituted aromatic ring penetrates the β-CD cavity and there is chiral differentiation by the β-CD as one of the isomer binds more strongly, which is indicated by the intensity of correlation peaks. The mode of penetration of the guest into the β-CD cavity was also established and structure of the complex has been proposed.     

Densitometric HPTLC Analysis of Juglone,Quercetin, Myricetin,Rutin, Caffeic Acid,and Gallic Acid in Juglans regia L.

JPC – Journal of Planar Chromatography – Modern TLC - Asensitive, selective, and precise high-performance thin-layer chromatography (HPTLC) method was developed for simultaneous...     

Inline pneumatically assisted atmospheric pressure matrix‐assisted laser desorption/ionization ion trap mass spectrometry

Atmospheric pressure (AP) matrix‐assisted laser desorption/ionization (MALDI) is known to suffer from poor ion transfer efficiencies as compared to conventional vacuum MALDI (vMALDI). To mitigate these issues, a new AP‐MALDI ion source utilizing a coaxial gas flow was developed. Nitrogen, helium, and sulfur hexafluoride were tested for their abilities as ion carriers for a standard peptide and small drug molecules. Nitrogen showed the best ion transport efficiency, with sensitivity gains of up to 1900% and 20% for a peptide standard when the target plate voltage was either continuous or pulsed, respectively. The addition of carrier gas not only entrained the ions efficiently but also deflected background species and declustered analyte–matrix adducts, resulting in higher absolute analyte signal intensities and greater signal‐to‐noise (S/N) ratios. With the increased sensitivity of pneumatically assisted (PA) AP‐MALDI, the limits of detection of angiotensin I were 20 or 3 fmols for continuous or pulsed target plate voltage, respectively. For analyzing low‐mass analytes, it was found that very low gas flow rates (0.3–0.6 l min^?1) were preferable owing to increased fragmentation at higher gas flows. The analyte lability, type of gas, and nature of the extraction field between the target plate and mass spectrometer inlet were observed to be the most important factors affecting the performance of the in‐line PA‐AP‐MALDI ion source. Copyright © 2010 John Wiley & Sons, Ltd.     

Accurate particle size distribution determination by nanoparticle tracking analysis based on 2-D Brownian dynamics simulation

A physical model is presented to simulate the average step length distribution during nanoparticle tracking analysis experiments as a function of the particle size distribution and the distribution of the number of steps within the tracks. Considering only tracks of at least five steps, numerical simulation could be replaced by a normal distribution approximation. Based on this model, simulation of a step length distribution allows obtaining a much more reliable estimation of the particle size distribution, thereby reducing the artificial broadening of the distribution, as is typically observed by direct conversion of step length to particle size data. As this fitting procedure also allowed including data from particles that were followed for a relatively low number of steps, the measurement time could be reduced for particles that are known to be monodisperse. Whereas the inversion is less sensitive towards the particle size distribution width, still similar values were obtained for both the average diameter and standard deviation of a polystyrene latex sample irrespective of the track length, provided that the latter included at least five steps.     

Zn[(L)Proline]2: an eligible candidate for the synthesis of xanthenediones in water

An efficient route for the condensation of aldehydes with dimedone in the presence of Zn[(L)Proline]₂ in water has been reported. Hydrophilicity of the catalyst is the main attribute of this reaction. The water‐mediated reaction using catalytic amounts of recyclable catalyst avoids the use of expensive, corrosive reagents and toxic solvents and provides operational simplicity. Moreover, column chromatography and recrystallization of product are not required as the crude products itself are very pure and hence can be used for target‐oriented synthesis on a large scale. Copyright © 2012 John Wiley & Sons, Ltd.