Analysis of tunable diode-laser spectra of Q(J,0) lines in CH3F near 1475 cm using a multispectrum fitting technique

We have analyzed the methyl fluoride ^RQ(J,0)Q branch lines located near 1475 cm⁻¹ using a simultaneous multi-spectrum fitting technique. In this analysis we have used previously recorded diode-laser data in which we collected many data points covering only one or two Q branch lines in a particular run. The analysis consists of simultaneously fitting 57 spectra collected with numerous pressure and path length conditions for all absorption lines. The data are concatenated to create one continuous spectrum of the Q branch. We have determined the intensity and self-broadened widths at 296 K for 23 ^RQ(J,0) lines.     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.     

Protonation constant of salicylidene (N-benzoyl)glycyl hydrazone and its coordination behaviour towards some bivalent metal ions

Protonation constant of an unsymmetrical Schiff base, salicylidene(N-benzoyl)glycyl hydrazone (SalBzGH), and formation constants of its complexes have been determined potentiometrically at different temperatures in aqueous dioxane medium. Complexes of SalBzGH with VO(IV), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) have been prepared. Elemental analyses, pH-metric, molar conductance, magnetic susceptibility, electronic, IR, ESR, XRD (powder) and NMR studies have been carried out to study the coordination behaviour of SalBzGH toward these metal ions. pH-metric and 1H NMR studies show the presence of two dissociable protons in the ligand. IR and NMR spectra suggest the tridentate nature of the ligand, coordinating as a uninegative species in the Mn(II) complex and as a dinegative species in all the other complexes. Presence of two different conformers of the ligand at room temperature and stabilization of a single conformer upon complex formation have been established from¹H NMR spectra of the metal-free ligand, Zn(II) and Hg(II) complexes recorded at 296 K. Electronic and ESR spectra indicate highly distorted tetragonal geometry for VO(IV) and Cu(II) complexes. XRD powder patterns of the Zn(II) complexes are indexed for an orthorhombic crystal system.     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.     

Heat transfer in unsteady MHD oscillatory flow

Heat transfer in unsteady MHD channel flow (of an incompressible viscous and electrically conducting fluid) under oscillatory pressure gradient when the channel surfaces are conducting and moving with time-dependent velocities has been analysed. The velocity, magnetic field and temperature distributions have been obtained and their numerical results are shown graphically.Symbols u velocity - H _o applied magnetic field - H _x induced magnetic field - T temperature - T ₁ ^* ,T ₂ ^* temperatures of the upper and lower planes - density - p pressure - kinematic viscosity - magnetic diffusivity - electrical conductivity of the fluid - A ^* characteristic velocity - L characteristic length - _e magnetic permeability of the fluid - C _p specific heat - coefficient of viscosity - k thermal conductivity - ₁, ₂ permeabilities of the planes - ₁, ₂ conductivities of the planes - ₁, ₂ conductance ratios of the planes - Pr Prandtl number (=C _p /k) - E Eckert number - M Hartmann number (= _e H _o L/) - R _e Reynolds number (=LA ^*/) - R _m magnetic Reynolds number (= _e LA ^*) - S Pr.E(=S)     

Sodium bromide catalysed one-pot synthesis of tetrahydrobenzo[b]pyrans via a three-component cyclocondensation under microwave irradiation and solvent free conditions

Sodium bromide catalysed three-component cyclocondensation of aryl aldehydes, alkyl nitriles and dimedone proceeds under microwave irradiation in solvent free conditions to give highly functionalised tetrahydrobenzo[b]pyrans in excellent yields.     

Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

A Validated Chiral LC Method for the Determination of Enantiomeric Purity of Pemetrexed Disodium on an Amylose-Based Chiral Stationary Phase

A simple and new isocratic normal phase chiral HPLC method has been developed for the determination of enantiomeric purity of pemetrexed disodium (l-enantiomer) in bulk drugs with a short run time of about 20 min. Chromatographic separation of l and d-enantiomers of pemetrexed disodium was achieved on an amylose based chiral stationary phase using a mobile phase consists of hexane, ethanol and trifluoro acetic acid. The resolution between the enantiomers was found to be more than 2.0. The system precision and method precision were found to be within 5% RSD for the distomer (d-enantiomer) at its specification level (i.e. not more than 1.0% w/w). The limit of detection and limit of quantification of distomer were 1.6 and 5 μg mL⁻¹, respectively for 10 μL injection volume. The percentage recovery of distomer was ranged from 90.6 to 105.7 in bulk drug samples. The test solution was found to be stable in the diluent for 48 h. The method was found to be specific for the enantiomers of pemetrexed disodium and can be conveniently used for the quantification of undesired d-enantiomer present in the bulk drug samples of pemetrexed disodium.     

Copolymerizations of alkyl methacrylates with vinyltriacetoxysilane

Copolymerizations of methyl methacrylate (MMA) and butyl methacrylate (BMA) with vinyltriacetoxysilane (VTAS) have been carried out in bulk at 70°. The compositions of the copolymers were determined from their silicon contents; the reactivity ratios were calculated by the Kelen-Tüdős method. For MMA/VTAS, r₁ = 7.75 ± 0.31 and for BMA/VTAS, r₁ = 4.62 ± 0.15; in both systems, r₂ is zero, indicating that VTAS does not homopolymerize under the experimental conditions. The influence of the silicon comonomer on properties of the copolymers, such as solubility annd thermal behaviour, was studied.     

Furoin thiosemicarbazone as an analytical reagent for nickel(II), palladium(II) and copper(II)

Furoin thiosemicarbazone (FTS) reacts with Ni(II), Pd(II) and Cu(II) in aqueous medium, giving yellow solutions at pH 9, 6 and 3 respectively. The complexes have absorption maxima at 360 nm for Ni(II) and Pd(II) and 355 nm for Cu(II). At these wavelengths the reagent absorbance is negligible. The molar absorptivities are 1.54 x 10(4) [Ni(FTS)(2)], 1.98 x 10(4) [Pd(FTS)(2)] and 1.45 x 10(4) 1.mole(-1).cm(-1) (CuFTS). Beer's law is valid up to 4, 5 and 3 ppm for Ni, Pd and Cu respectively. The apparent instability constant of the Ni-FTS system is found to be 6.5 x 10(-11), of the Cu-FTS system 7.1 x 10(-7) and of the Pd-FTS system 3 x 10(-12) at the recommended pH values. The effect of various ions is reported.