Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.     

Anisotropic Electron Conductance Driven by Reaction Byproducts on a Porous Network of Dibromobenzothiadiazole on Cu(110)

Efficiency in charge‐transport is a fundamental but demanding prerequisite to allow better exploitation of molecular functionalities in organic electronics and energy‐conversion systems. Here, we report on a mechanism that enables a one‐dimensional conductance structure by connecting discrete molecular states at 2.1 eV through the pores of a metal–organic network on Cu(110). Two adjacent, periodic and isoenergetic contributions, namely a molecular resonance and the confined surface‐state, add‐up leading to anisotropic structures, as channels, observable in real‐space conductance images. The adsorption configurations of Br atoms, inorganic byproduct of the redox‐reacted 4,7‐dibromobenzo[c]‐1,2,5‐thiadiazole (2Br‐BTD) molecules on the copper surface, drive the confinement of the Cu surface state within the pores and critically control the channel continuity. Small displacements of the Br atoms change the local surface potential misaligning the energy levels. This work visualizes the effect of order‐disorder transitions caused by the movement of single atoms in the electronic properties of two‐dimensional organic networks.     

Towards Nanoscale Biomedical Devices in Medicine: Biofunctional and Spectroscopic Characterization of Superparamagnetic Nanoparticles

Medical interest in nanotechnology originates from a belief that nanoscale therapeutic devices can be constructed and directed towards its target inside the human body. Such nanodevices can be engineered by coupling superparamagnetic nanoparticle to biomedically active proteins. We hereby report the immobilization of a PhEst, a S-formylglutathione hydrolase from the psychrophilic P. haloplanktis TAC125 onto the gold coated surface of modified superparamagnetic core-shell nanoparticles (Fe₃O₄@Au). The synthesis of the nanoparticles is also reported. S-formylglutathione hydrolases constitute a family of ubiquitous enzymes which play a key role in formaldehyde detoxification both in prokaryotes and eukaryotes. PhEst was originally annotated as a putative feruloyl esterase, an enzyme that releases ferulic acid (an antioxidant reactive towards free radicals such as reactive oxygen species) from polysaccharides esters. Dynamic light scattering, scanning electron microscopy with energy dispersive X-ray spectroscopy, UV–visible absorption spectroscopy, fluorescence spectroscopy, magnetic separation technique and enzyme catalytic assay confirmed the chemical composition of the gold covered superparamagnetic nanoparticles, the binding and activity of the enzyme onto the nanoparticles. Activity data in U/ml confirmed that the immobilized enzyme is approximately 2 times more active than the free enzyme in solution. Such particles can be directed with external magnetic fields for bio-separation and focused towards a medical target for therapeutical as well as bio-sensor applications.     

Identification, cloning and characterization of a novel 47 kDa murine PKA C subunit homologous to human and bovine Cβ2

Background  

Two main genes encoding the catalytic subunits Cα and Cβ of cyclic AMP dependent protein kinase (PKA) have been identified in all vertebrates examined. The murine, bovine and human Cβ genes encode several splice variants, including the splice variant Cβ2. In mouse Cβ2 has a relative molecular mass of 38 kDa and is only expressed in the brain. In human and bovine Cβ2 has a relative molecular mass of 47 kDa and is mainly expressed in lymphoid tissues.     

Migration of perfluorinated compounds from paperbag to Tenax® and lyophilised milk at different temperatures

ABSTRACT

Migration tests of perfluoroalkyl substances (PFASs) from a grease-proof paperbag used for packaging of pet food have been carried out. No migration of perfluorocaboxylic acids (PFCAs), from PFBA to PFTeDA, to the simulant Tenax® was found after 10 days at 40°C. However, the increase of temperature in the range 80–160°C gave rise to the migration of the PFCAs. Finally, the migration to real foods such as lyophilised whole and low-fat milk samples at 80 and 120°C was studied. The results indicate that the migration percentages of the PFCASs into food samples are much higher than those obtained into Tenax®.     

Application of dilatometric analysis to the study of autoclaved calcium silicate materials

The process of shrinkage of calcium silicate hydrate was investigated by dilatometry up to 350 °C. The properties of this material are based on the formation of C–S–H phases during the reaction at temperatures between 180 and 205 °C and water vapor pressure lower than 16 bars. The main C–S–H phases are 11.3 Å tobermorite and xonotlite. 11.3 Å tobermorite converts to 9.3 Å tobermorite on air at temperatures around 300 °C. The hydrosilicate materials were prepared from quicklime and finely ground sand with different CaO/SiO₂ ratios under different hydrothermal conditions. The reaction time was 24 h. Materials based on xonotlite and tobermorite were produced, and the calcium silicate phases were characterized by XRD and TG/DTA methods. Dilatometry measurements were used to study the effect of heating conditions on sample shrinkage. Dehydration of hydrated calcium silicate minerals occurred during heating. The results show that sample shrinkage is dependent on the type and amount of C–S–H phases, the amount of bound water and formation of 9.3 Å tobermorite. All samples showed shrinkage after heating up to 350 °C, but this change was not irreversible for all samples after cooling to room temperature.

     

Injection-moulded α- and β-polypropylenes: I. Structure vs. processing parameters

The paper studies the effects of mould temperature and holding pressure on the structure of neat and β-nucleated isotactic polypropylenes. Commercially available isotactic polypropylene was modified with a β-specific nucleator based on N,N′-dicyclohexylnaphthalene-2,6-dicarboxamide in the concentration of 0.03 wt.%. From both the original material (α-iPP) and the β-nucleated material (β-iPP), dog bone-shaped test specimens were injection-moulded, using two sets of processing parameters. In the T-set the mould temperature was varied within the range of 40-120 °C in 10 °C steps, while in the P-set the holding pressure was changed from 5 to 13 MPa in 1 MPa steps. Other processing parameters were kept on the same level. Polarized-light microscopy showed a strong effect of mould temperature on the morphology of α-iPP specimens; the skin thinned out and the spherulite size increased with mould temperature rise. On the other hand, in the case of β-iPP only the skin thickness was correspondingly affected, while the spherulite size remained virtually constant, independent of the mould temperature changes. At the same structure level, both α-iPP and β-iPP specimens were insensitive to holding pressure variations. Polymorphic composition derived from wide-angle X-ray scattering displayed similar range of changes induced by variations of the processing parameters for both materials. The increase of mould temperature positively influenced the crystallinity and the β-form content, particularly in the skin of specimens. On the contrary, higher holding pressure depressed the crystallinity proportionally within the bulk of specimens.     

Coupling of metal-based light-harvesting antennas and electron-donor subunits: trinuclear ruthenium(II) complexes containing tetrathiafulvalene-substituted polypyridine ligands

Three new tetrathiafulvalene-substituted 2,2'-bipyridine ligands, cis-bpy-TTF(1), trans-bpy-TTF(1), and cis-bpy-TTF(2) have been prepared and characterized. X-ray analysis of trans-bpy-TTF(1) is also reported. Such ligands have been used to prepare two new trinuclear Ru(II) complexes, namely, [[(bpy)(2)Ru(micro-2,3-dpp)](2)Ru(bpy-TTF(1))](PF(6))(6) (9; bpy=2,2'-bipyridine; 2,3-dpp=2,3-bis(2'-pyridyl)pyrazine) and [[(bpy)(2)Ru(micro-2,3-dpp)](2)Ru(bpy-TTF(2))](PF(6))(6) (10). These compounds can be viewed as coupled antennas and charge-separation systems, in which the multichromophoric trinuclear metal subunits act as light-harvesting antennas and the tetrathiafulvalene electron donors can induce charge separation. The absorption spectra, redox behavior, and luminescence properties (both at room temperature in acetonitrile and at 77 K in a rigid matrix of butyronitrile) of the trinuclear metal complexes have been studied. For the sake of completeness, the mononuclear compounds [(bpy)(2)Ru(bpy-TTF(1))](PF(6))(2) (7) and [(bpy)(2)Ru(bpy-TTF(2))](PF(6))(2) (8) were also synthesized and studied. The properties of the tetrathiafulvalene-containing species were compared to those of the model compounds [Ru(bpy)(2)(4,4'-Mebpy)](2+) (4,4'-Mebpy=4,4'-dimethyl-2,2'-bipyridine) and [[(bpy)(2)Ru(micro-2,3-dpp)](2)Ru(bpy)](6+). The absorption spectra and redox behavior of all the new metal compounds can be interpreted by a multicomponent approach, in which specific absorption features and redox processes can be assigned to specific subunits of the structures. The luminescence properties of the complexes in rigid matrices at 77 K are very similar to those of the corresponding model compounds without TTF moieties, whereas the new species are nonluminescent, or exhibit very weak emissions relative to those of the model compounds in fluid solution at room temperature. Time-resolved transient absorption spectroscopy confirmed that the potentially luminescent MLCT states of 7-10 are significantly shorter lived than the corresponding states of the model species. Photoinduced electron-transfer processes from the TTF moieties to the (excited) MLCT chromophore(s) are held responsible for the quenching processes.     

Replacing the Rhamnose-Xylose Moiety of QS-21 with Simpler Terminal Disaccharide Units Attenuates Adjuvant Activity in Truncated Saponin Variants

Adjuvants are key immunostimulatory components in vaccine formulations, which improve the immune response to the co-administered antigen. The saponin natural product QS-21 is one of the most promising immunoadjuvants in the development of vaccines against cancer and infectious diseases but suffers from limitations that have hampered its widespread human use. Previous structure–activity relationship studies have identified simplified saponin variants with truncated carbohydrate chains, but have not focused on the influence of the linear oligosaccharide domain of QS-21 in adjuvant activity. Herein, an expeditious 15-step synthesis of new linear trisaccharide variants of simplified QS-21-derived adjuvants is reported, in which the complex terminal xylose-rhamnose moiety has been replaced with commercially available, simpler lactose and cellobiose disaccharides in a β-anomeric configuration. In vivo immunological evaluation of the synthetic saponins showed attenuated antibody responses, highlighting the negative impact of such carbohydrate modifications on adjuvant activity, which could be associated with higher saponin conformational flexibility.     

Fe(III)-Catalyzed direct C3 chalcogenylation of indole: The effect of iodide ions

A mild and efficient iron (III)-catalyzed C3 chalcogenylation of indoles has been developed and the role of the iodide ions in this transformation was investigated. EPR experiments revealed the reduction of Fe(III) to Fe(II) under the reaction conditions, supporting the formation of molecular iodine in the system, which in effect catalyze the reaction. The scope of the chalcogenylation was broad and the synthesis of more functionalized 3-selenylindoles was explored.