Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.     

Thermodynamic Properties and Melting Behavior of Bi–Sn–Zn Alloys

Summary. The partial and integral enthalpies of mixing of liquid Bi–Sn–Zn alloys were determined at 500°C by a drop calorimetric technique using a Calvet-type microcalorimeter. The ternary interaction parameters in the Bi–Sn–Zn system were fitted using the Redlich-Kister-Muggianu model for substitutional solutions, and isoenthalpy curves of the integral molar enthalpy of mixing at 500°C were constructed. Furthermore, a DSC technique was used to determine the liquidus temperatures in three sections (3, 5, and 7 at.% Zn) as well as the invariant reaction temperature of the ternary eutectic L ⇄ (Bi) + (Sn) + (Zn). The ternary eutectic reaction was found at 135°C.     

Excluded volume driven counterion condensation inside nanotubes in a concave electrical double layer model

The physical properties of organic nanotubes attract increasing attention due to their potential benefit in technology, biology and medicine. We study the effect of ion size on the electrical properties of cylindrical nanotubes filled with electrolyte solution within a modified Poisson-Boltzmann (PB) approach. For comparison purposes, small hollow nanospheres filled with electrolyte solution are considered. The finite size of the particles in the inner electrolyte solution is described by the excluded volume effect within a lattice statistics approach. We found that an increased ion size reduces the number of counterions near the charged inner surface of the nanotube, leading to an enlarged electrostatic surface potential. The concentration of counterions close to the inner surface saturates for higher surface charge densities and larger ions. In the case of saturation, the closest counterion packing is achieved, all lattice sites near the surface are occupied and an actual counterion condensation is observed. By contrast, the counterion concentration at the axis of the nanotube steadily increases with increasing surface charge density. This growth is more pronounced for smaller nanotube radii and larger ions. At larger nanotube radii for small ion size counterion condensation may also be observed according to the Tsao criterion, i.e. the counterion concentration at the centre is independent of the number of counterions in the system. With decreasing radius the Tsao condensation effect is shifted towards physiologically unrealistic surface charge densities.     

Synthesis and Structure Investigations of Potential Sedative and Anticonvulsant Hydroxy- and Acetoxy-N-(3-oxobutyl)-pyrido[2,3-d]pyridazinonesa

Summary.  Novel N-(3-oxobutyl)-hydroxy- and acetoxypyrido[2,3-d]pyridazinones were synthesized and tested in vivo for their sedative and anticonvulsant activity. The Michael-type reaction of quinolinic acid hydrazide and methyl vinyl ketone afforded a mixture of two isomers, 5-hydroxy-N ⁷-(3-oxobutyl)-pyrido[2,3-d]pyridazin-8(7H)-one and 8-hydroxy-N ⁶-(3-oxobutyl)-pyrido[2,3,-d]pyridazin-5-(6H)-one, in a ratio of 2:1 which were separated by crystallization. Subsequent acetylation of both isomers yielded the corresponding 5- and 8-acetoxy compounds. The structures of the compounds were proven and completely assigned on the basis of ¹H, ¹³C, ¹⁵N NMR, and 1D NOE difference spectra as well as 2D C,H-correlation experiments. Preliminary pharmacological tests showed low acute toxicity with a LD ₅₀ > 1000 mg/kg in the mouse and sedative activity for the title compounds. 5-Acetoxy-N ⁷- (3-oxobutyl)-pyrido[2,3-d]pyridazin-8(7H)-one displayed a borderline anticonvulsant activity in the metrazole test model. Corresponding author. E-mail: edith.goessnitzer@uni-graz.at Received March 20, 2002; accepted April 3, 2002     

Characterization of methacrylate monoliths for purification of DNA molecules

The suitability of methacrylate based anion exchange monolithic supports for the separation and purification of plasmid and genomic DNA has been explored. The effect of the size of the channels, ionic strength of the solution, and ligand density on the dynamic binding capacity has been investigated. The dynamic binding capacity was found to be flow independent, at least up to a linear velocity of 700 cm h(-1), and exceeded 9 mg mL(-1) for all types of DNA. The recovery depends on the pH value of the mobile phase and its ionic strength as well as on the density of the active groups. Under optimal conditions recoveries exceeding 80% were obtained even for genomic DNA. Finally, the suitability of this approach is demonstrated by purification of a real-life sample.     

The influence of chitosan on in vitro properties of Eudragit RS microspheres

Eudragit RS microspheres containing chitosan hydrochloride were prepared by the solvent evaporation method using acetone/liquid paraffin solvent system and their properties were compared with Eudragit RS microspheres without chitosan, prepared in our previous study. Different stirring rates were applied (400-1200 rpm) and drug content, Higuchi dissolution rate constant, surface and structure characteristics of the microspheres were determined for each size fraction. An increase in average particle size with a reduction of stirring rate appeared in limited interval in both series. The average particle size of microspheres without chitosan, prepared at the same stirring rate, was smaller. Pipemidic acid content increased with increasing fraction particle size, but not with increasing stirring rate as it was observed for microspheres without chitosan. We presume that high pipemidic acid content in larger microspheres is a consequence of cumulation of undissolved pipemidic acid particles in larger droplets during microspheres preparation procedure. Pipemidic acid release was faster from microspheres with chitosan and no correlation between Higuchi dissolution rate constant and stirring rate or fraction particle size was found, though it existed in the system without chitosan. Structure and surface characteristics of microspheres observed by scanning electron microscope (SEM) were not changed significantly by incorporation of chitosan. But in contrast with microspheres without chitosan, the surface of chitosan microspheres was more porous after three hours of dissolution. It is supposed that the influence of particle size fraction and stirring rate on release characteristics is expressed to a great extent through porosity and indirectly through total effective surface area, but the incorporation of highly soluble component i.e. chitosan salt hides these effects on drug release. In conclusion, changes in biopharmaceutical properties due to varying stirring rate and fraction particle size exhibited the same direction as those reported for the microspheres without chitosan, although they are less expressed because of increased experimental variability, likely caused by chitosan.     

Evaluation of the Quality of Ink-Jet Printed Paper by Planar Chromatography

JPC – Journal of Planar Chromatography – Modern TLC - Paper chromatography and thin-layer chromatography (TLC) are two efficient analytical methods that can be used to characterize...     

Mathematical modeling of the relation between myosin phosphorylation and stress development in smooth muscles

In this paper the 4-state latch bridge model proposed by Rembold and Murphy is expanded; first by incorporation of the analytical expression of Ca2+ dependent MLCK activation from the work of Kato et al. and second, by inclusion of the myosin dephosphorylation based on the Michaelis-Menten kinetics. The analysis of the proposed model and the comparison with the original model results as well as with the experimental data is presented. The model is able to predict the steady-state isometric stress and the myosin phosphorylation in dependence on steady cytosolic [Ca2+] as well as the temporal evolution of the system in dependence on the input Ca2+ signal in the form of biphasic transient, whereby our model results are in several aspects in better agreement with experimental observations.     

Structural analysis of 2,6-[bis(alkyloxy)methyl]-phenyltin derivatives using electrospray ionization mass spectrometry

Electrospray ionization (ESI) mass spectrometry was applied to the structural analysis of 23 2,6-[bis(alkyloxy)methyl]phenyltin(IV) derivatives. The mass spectra were measured in both polarity modes and multistage tandem mass spectrometric (MS(n)) measurements were performed on the ion trap analyser for positively charged tin-containing ions. The sum of complementary ions observed in the positive-ion mode (i.e. [M-R(3)](+) ion) and in the negative-ion mode (i.e. [R(3)](-) ion) permits molecular mass determination in spite of the fact that the molecular adducts were often missing even in the first-order mass spectra. The subsequent fragmentation of [M-R(3)](+) ions studied by MS(n) and the correlation of observed fragment ions with the expected structures of synthesized organotin(IV) compounds allowed us to understand the fragmentation behaviour and the mechanism of the ion formation for studied compounds. The typical neutral losses are alkenes, alcohols and aldehydes. The fragmentation pattern of one selected compound was supported by MS(n) measurements of an isotopically labelled analogue to confirm unusual ion-molecule reactions of some fragment ions with water in the ion trap.