Atomic Hydrogen Induced Chemical Vapor Deposition of Silicon Oxycarbide Thin Films Derived from Diethoxymethylsilane Precursor

Amorphous silicon oxycarbide (a-SiOC:H) films produced by remote plasma RPCVD from diethoxymethylsilane (DEMS) were characterized in terms of their basic properties related to the coatings deposited using conventional plasma enhanced PECVD method. The effect of substrate temperature (T_S) on the growth rate, chemical composition, structure, and properties of resulting a-SiOC:H films is reported. Film growth is an adsorption-controlled process, wherein two mechanisms can be distinguished with a transition at about T_S=70°C. Depending on the temperature, films of different nature can be obtained, from polymer-like to highly crosslinked material with C-Si-O network. The chemical structure of a-SiOC:H films was characterized by FTIR, ¹³C and ²⁹Si solid-state NMR, and X-ray photoelectron spectroscopes. The a-SiOC:H films were also characterized in terms of their density, refractive index, surface morphology, conformality of coverage, hardness, adhesion to a substrate, and friction coefficient. The films were found to be morphologically homogeneous materials exhibiting good conformality of coverage and small surface roughness. Their refractive index exhibits anomalous effect revealing a minimum value at T_S=125°C. Due to their exceptional physical properties a-SiOC:H films produced by RPCVD from DEMS precursor seems to be useful as potential dielectric materials or coatings for various encapsulation applications.     

Benefiting from information-rich multi-frequency AC voltammetry coupled with chemometrics on the example of on-line monitoring of leveler component of electroplating bath

Simultaneous application of multiple sinusoidal waveforms perturbations superimposed onto DC staircase step significantly enriches current response. The measured current is characterized by a matrix of data rather than a conventional voltammetric output in a form of a vector. This increase of the dimensionality of the current response and therefore the wealth of analytical information is achieved without compromising the time of analysis. The natural approach for compression of such data and extraction of relevant information is by utilizing multi-way chemometric decomposition techniques. An electroplating solution presents a very challenging analyte for electroanalysis as its constituents interact synergistically with each other during both the plating process and its simulation during electroanalysis. For some components the mechanism is not entirely understood. Therefore, the only way to benefit from the analytical data is by employing soft modeling. The electrode processes involving additives rely heavily on adsorption and, indirectly, on electron transfer kinetics for which AC voltammetry is an analytical technique capable of delivering informative signals. This paper presents a rigorous universal method for calculating and validating an exemplary multi-way calibration of a leveler component in a copper electroplating bath used in the semiconductor industry. The method presented employs comparatively Parallel Factor Analysis coupled with Inverse Least Squares Regression and multi-linear Partial Least Squares. The calibration training set consists of multi-frequency AC voltammetric data subjected to pretreatments aiming to select informative independent variables and exclude outliers.     

Two‐Photon Voltmeter for Measuring a Molecular Electric Field

We present a new approach for determining the strength of the dipolar solute‐induced reaction field, along with the ground‐ and excited‐state electrostatic dipole moments and polarizability of a solvated chromophore, using exclusively one‐photon and two‐photon absorption measurements. We verify the approach on two benchmark chromophores N,N‐dimethyl‐6‐propionyl‐2‐naphthylamine (prodan) and coumarin 153 (C153) in a series of toluene/dimethyl sulfoxide (DMSO) mixtures and find that the experimental values show good quantitative agreement with literature and our quantum‐chemical calculations. Our results indicate that the reaction field varies in a surprisingly broad range, 0–10⁷ V cm^?1, and that at close proximity, on the order of the chromophore radius, the effective dielectric constant of the solute–solvent system displays a unique functional dependence on the bulk dielectric constant, offering new insight into the close‐range molecular interaction.     

Reaction of 2-trifluoroacetyl-1,8-Bis(dimethylamino)naphthalene with strong organic bases: Deprotonation of 1-NMe2 group resulting in the formation of Benzo[g]indole derivatives versus nucleophilic addition to CO group

A novel approach to pyrrole ring closure in 2-trifluoroacetyl- and 2-ethoxycarbonyl-1,8-bis(dimethylamino)naphthalenes via treatment with 2-lithium-1,8-bis(dimethylamino)naphthalene producing the corresponding benzo[g]indole derivatives, was examined with different alkyl- and aryllithium compounds as well as with LDA. It was found that the highest yields of benzo[g]indoles (up to 70%) are obtained with aryllithium reagents when they contain NMe₂ group in ortho-position to the carbanionic centre. In all other cases the formation of acyclic alcohol arising from ordinary intermolecular addition of the carbanion to the CO group strongly prevails. The dramatic facilitation of deprotonation of the N-Me group in substrate followed by pyrrolic cyclization in the case of 2-lithium-N,N-dimethylanilines was explained through a specific structure of the reaction transition state.     

Metal(II) Ion Complexes with 5‐(Pyrazin‐2‐yl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione; Synthesis,Structural Characterization,Acid‐base,and Complexing Properties in Solution

The study reports the synthesis of complexes Co(HL)Cl₂ ( 1 ), Ni(HL)Cl₂ ( 2 ), Cu(HL)Cl₂ ( 3 ), and Zn(HL)₃Cl₂ ( 4 ) with the title ligand, 5‐(pyrazin‐2‐yl)‐1,2,4‐triazole‐5‐thione (HL), and their characterization by elemental analyses, ESI‐MS (m/z), FT‐IR and UV/Vis spectroscopy, as well as EPR in the case of the Cu^II complex. The comparative analysis of IR spectra of the metal ion complexes with HL and HL alone indicated that the metal ions in 1 , 2 , and 3 are chelated by two nitrogen atoms, N(4) of pyrazine and N(5) of triazole in the thiol tautomeric form, whereas the Zn^II ion in 4 is coordinated by the non‐protonated N(2) nitrogen atom of triazole in the thione form. pH potentiometry and UV/Vis spectroscopy were used to examine Co^II, Ni^II, and Zn^II complexes in 10/90 (v/v) DMSO/water solution, whereas the Cu^II complex was examined in 40/60 (v/v) DMSO/water solution. Monodeprotonation of the thione triazole in solution enables the formation of the L:M = 1:1 species with Co^II, Ni^II and Zn^II, the 2:1 species with Co^II and Zn^II, and the 3:1 species with Zn^II. A distorted tetrahedral arrangement of the Cu^II complex was suggested on the basis of EPR and Vis/NIR spectra.     

Investigating the Disordered and Membrane-Active Peptide A-Cage-C Using Conformational Ensembles

The driving forces and conformational pathways leading to amphitropic protein-membrane binding and in some cases also to protein misfolding and aggregation is the subject of intensive research. In this study, a chimeric polypeptide, A-Cage-C, derived from α-Lactalbumin is investigated with the aim of elucidating conformational changes promoting interaction with bilayers. From previous studies, it is known that A-Cage-C causes membrane leakages associated with the sporadic formation of amorphous aggregates on solid-supported bilayers. Here we express and purify double-labelled A-Cage-C and prepare partially deuterated bicelles as a membrane mimicking system. We investigate A-Cage-C in the presence and absence of these bicelles at non-binding (pH 7.0) and binding (pH 4.5) conditions. Using in silico analyses, NMR, conformational clustering, and Molecular Dynamics, we provide tentative insights into the conformations of bound and unbound A-Cage-C. The conformation of each state is dynamic and samples a large amount of overlapping conformational space. We identify one of the clusters as likely representing the binding conformation and conclude tentatively that the unfolding around the central W23 segment and its reorientation may be necessary for full intercalation at binding conditions (pH 4.5). We also see evidence for an overall elongation of A-Cage-C in the presence of model bilayers.     

Purified oxygen- and nitrogen-modified multi-walled carbon nanotubes as metal-free catalysts for selective olefin hydrogenation

Oxygen- and nitrogen-functionalized carbon nanotubes (OCNTs and NCNTs) were applied as metal-free catalysts in selective olefin hydrogenation. A series of NCNTs was synthesized by NH₃ post-treatment of OCNTs. Temperature-programmed desorption, N₂ physisorption, Raman spectroscopy, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy were employed to characterize the surface properties of OCNTs and NCNTs, aiming at a detailed analysis of the type and amount of oxygen- and nitrogen-containing groups as well as surface defects. The gas-phase treatments applied for oxygen and nitrogen functionalization at elevated temperatures up to 600 °C led to the increase of surface defects, but did not cause structural damages in the bulk. NCNTs showed a clearly higher activity than the pristine CNTs and OCNTs in the hydrogenation of 1,5-cyclooctadiene, and also the selectivity to cyclooctene was higher. The favorable catalytic properties are ascribed to the nitrogen-containing surface functional groups as well as surface defects related to nitrogen species. In contrast, oxygen-containing surface groups and the surface defects caused by oxygen species did not show clear contribution to the hydrogenation catalysis.     

Structure of the O-Specific Polysaccharide of Hafnia Alvei 23 Having an Oligosaccharide-Phosphate Repeating Unit

ABSTRACT

Lipopolysaccharide (LPS) of Hafnia alvei 23 has an acid-labile O-specific polysaccharide (OPS) with a pentasaccharide-phosphate repeating unit containing D-Glc1P, D-GlcNAc, L-Fuc, 6-deoxy-D-talose (D-6dTal), 4-acetamido-4,6-dideoxy-D-glucose (D-Qui4NAc), and an O-acetyl group. A partially degraded OPS was obtained by hydrolysis of LPS with 0.25 M sodium acetate in aqueous 0.5% acetic acid. Fractionation of LPS on Sephadex G-200 in DOC buffer allowed isolation of long-chain LPS species which, together with OPS, were studied by methylation analysis, chemical degradations (O-deacetylation, dephosphorylation with 48% hydrofluoric acid, Smith degradation), and ¹H and ¹³C NMR spectroscopy, including 2D COSY, TOCSY, NOESY, and H-detected ¹H,¹³C heteronuclear single-quantum coherence (HSQC) experiments. The following structure of the repeating unit of OPS was established:     

C-Acylation of Electron-Excess Heterocycles by Isocyanatophosphoric Acid Dichlorides

Abstract

Isocyanatophosphoric acid dichlondes was used for introduction of phosphorus-containing groups at electron-excess heterocycles. Hetaryl containing dichlorophosphates, convenient starting material for synthesis for wide set of derivatives, were prepared by C-acylation with this reagent.