Microcrystals formed in proton bombarded poly(vinyl chloride) films

Thin films of PVC were bombarded with 700 keV protons, and studied with RGA during bombardment, and later with TEM. A great mass loss was observed, and the remaining material was found to contain many micro-crystals with interplanar spacings of 0.25 and 0.28 nm within an amorphous matrix.     

Anomalous NMR behavior of meso compounds with remote stereogenic centers on addition of chiral shift reagent or chiral solvating agent

A problem has arisen in using chiral shift reagents (CSR) and chiral solvating agents (CSA) to determine meso and racemic forms of diastereoisomers in which the stereogenic centers of the molecules are separated by achiral spacers. It is found that NMR signals of both meso and racemic forms of diastereoisomers may exhibit doubling on addition of CSR/CSA, which means that unequivocal assignments cannot be made without characterizing the effects for separate meso and racemic forms; this is particularly important for additions of CSR/CSA at relatively low concentrations, which always result in the splitting of some NMR signals of diastereoisomers. The phenomenon is demonstrated in the (31)P NMR spectra of meso and racemic forms of three spermine-bridged gem-disubstituted cyclotriphosphazatrienes, 1a-c, and compared with analogous achiral molecules, the per-substituted spermine-bridged cyclotriphosphazatrienes 2a-d. As expected, only one set of (31)P NMR signals was observed for the achiral compounds 2a-d, even on addition of CSA. Two sets of (31)P NMR ABX multiplets corresponding to meso and racemic diastereoisomers were observed for compounds 1a-c; on addition of CSA, the signals of at least one of the multiplets for each compound separated into more than the expected groups of three lines with an intensity distribution of 2:1:1. To understand this phenomenon, the meso and racemic forms of 1a and 1b and the meso form of 1c have been separated and characterized by X-ray crystallography. On addition of CSA to the racemic forms of 1a and 1b, the (31)P NMR spectrum shows the expected doubling of signals, but, unexpectedly, the same is observed for each of the meso forms of 1a-c. Analogous results using both CSA and CSR have been obtained for the meso and racemic forms of the diastereoisomeric piperazine-bridged macrocyclic-phosphazene compound, 3, whereas no effect was observed for the two meso forms of the doubly bridged macrocyclic-phosphazene compound 4. The phenomenon of doubling of the (31)P NMR signals of the meso form of singly bridged cyclotriphosphazatrienes, 1a-c and 3, is explained by consideration of the equilibrium in solution of independent complexation of a chiral ligand with molecules that have two chiral cyclophosphazene moieties separated by an achiral spacer group. The results show that the stereogenicity of such diastereoisomeric molecules in solution cannot be characterized unequivocally by NMR measurements on addition of either CSR or CSA.     

Poly(2-(dimethylamino)ethyl methacrylate) brushes fabricated by surface-mediated RAFT polymerization and their response to pH

In this study, well-defined, high density poly(2-(dimethylamino)ethyl methacrylate) [poly(DMAEMA)] brushes were fabricated by the combination of the self-assembly of a monolayer of RAFT agent and surface-mediated RAFT polymerization. The whole fabrication process of the poly(DMAEMA) was followed by water contact angles, grazing angle-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. Kinetic studies revealed a linear increase in poly(DMAEMA) film thickness with polymerization time, indicating that the chain growth from the surface was a controlled process. Characterization of the poly(DMAEMA) brushes, such as molecular weight and thickness determination, were measured by gel permeation chromatography, and ellipsometry, and the grafting density was estimated. The pH response of the poly(DMAEMA) brushes was further investigated and the results verified the “brush-like” to “mushroom-like” transition of the poly(DMAEMA) chains due to the reversible protonation/deprotonation upon changing the solution pH.     

A new aluminum iron oxide Schottky photodiode designed via sol–gel coating method

A novel aluminum iron oxide(Al/AlFe2O4/p-Si) Schottky photodiode was successfully fabricated via the sol–gel coating process. The microstructure of the spinel ferrite(AlFe2O4) was examined by atomic force microscopy. The current–voltage characteristics of the fabricated photodiode were studied under dark and different illumination conditions at room temperature. By using the thermionic emission theory, the forward bias I–V characteristics of the photodiode are analyzed to determine the main electrical parameters such as the ideality factor(n) and barrier height(ΦB0) of the photodiode. The values of n and ΦB0 for all conditions are found to be about 7.00 and 0.76 eV, respectively. In addition,the values of series resistance(Rs) are determined using Cheung's method and Ohm's law. The values of Rs and shunt resistance(Rsh) are decreased with the increase of illumination intensity. These new spinel ferrites will open a new avenue to other spinel structure materials for optoelectronic devices in the near future.     

Hybrid phospholipid bilayer coatings for separations of cationic proteins in capillary zone electrophoresis

Protein separations in CZE suffer from nonspecific adsorption of analytes to the capillary surface. Semipermanent phospholipid bilayers have been used to minimize adsorption, but must be regenerated regularly to ensure reproducibility. We investigated the formation, characterization, and use of hybrid phospholipid bilayers (HPBs) as more stable biosurfactant capillary coatings for CZE protein separations. HPBs are formed by covalently modifying a support with a hydrophobic monolayer onto which a self‐assembled lipid monolayer is deposited. Monolayers prepared in capillaries using 3‐cyanopropyldimethylchlorosilane (CPDCS) or n‐octyldimethylchlorosilane (ODCS) yielded hydrophobic surfaces with lowered surface free energies of 6.0 ± 0.3 or 0.2 ± 0.1 mJ m^?2, respectively, compared to 17 ± 1 mJ m^?2 for bare silica capillaries. HPBs were formed by subsequently fusing vesicles comprised of 1,2‐dilauroyl‐sn‐glycero‐3‐phosphocholine or 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine to CPDCS‐ or ODCS‐modified capillaries. The resultant HPB coatings shielded the capillary surface and yielded reduced electroosmotic mobility (1.3–1.9 × 10^?4 cm² V^?1s^?1) compared to CPDCS‐ and ODCS‐modified or bare capillaries (3.6 ± 0.2 × 10^?4 cm² V^?1s^?1, 4.8 ± 0.4 × 10^?4 cm² V^?1s^?1, and 6.0 ± 0.2 × 10^?4 cm² V^?1s^?1, respectively), with increased stability compared to phospholipid bilayer coatings. HPB‐coated capillaries yielded reproducible protein migration times (RSD ≤ 3.6%, n ≥ 6) with separation efficiencies as high as 200 000 plates/m.     

DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3, 6-dihydropyrimidin-1[2H]-yl)-N-(4-(1, 3-dioxo-1H-benzo [de]isoquinolin-2[3H]-yl) aryl) acetamides as antimicrobial agents

We report herein DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3,6-dihydropyrimidin-1[2H]-yl)-N-(4-(1,3-dioxo-1H-benzo[de]isoquinolin-2[3H]-yl) aryl) acetamides ( 4a-j ). The silent features of this new one pot synthesis include the shorter reaction time, high yields, simple workup, and simultaneous formation of N-Amide and N-benzyl bonds in the one pot. The newly synthesized compounds ( 4a-j ) were characterized by different spectral techniques such as IR, ¹H-NMR, ¹³C-NMR, HRMS. All the synthesized compounds were evaluated for their anti-bacterial and anti-fungal activities. The anti-bacterial activities results reveal that the compounds 4a , 4g , 4i , and 4j are most active against S. aureus. In the case of B. subtilis the compounds 4a , 4i , and 4j are found to be most active. The compounds 4c , 4e , 4i , and 4j are most active against E. coli. In the case of P. aeruginosa 4a , 4i & 4j are found to be more active. On the other hand, the anti-fungal activity result shows that the compounds 4d , 4f , 4i , and 4j are more active against A. niger. The compounds 4a , 4d , 4i , and 4j are found to be more active against C. albicans.     

Retention of configuration in the nucleophilic substitution reactions of some nine-membered ansa derivatives of cyclotriphosphazatriene

X-ray crystallographic evidence shows that nucleophilic substitution reactions of two different types of cyclophosphazene derivatives with relatively rigid nine-membered ansa rings leads to the first demonstration of retention of configuration in these molecular systems.     

Solutions of Zakharov-Kuznetsov equation with power law nonlinearity in (1+3) dimensions

This paper studies the Zakharov-Kuznetsov equation in (1+3) dimensions with an arbitrary power law nonlinearity. The method of Lie symmetry analysis is used to carry out the integration of the Zakharov-Kuznetsov equation. The solutions obtained are cnoidal waves, periodic solutions, singular periodic solutions, and solitary wave solutions. Subsequently, the extended tanh-function method and the G′/G method are used to integrate the Zakharov-Kuznetsov equation. Finally, the nontopological soliton solution is obtained by the aid of ansatz method. There are numerical simulations throughout the paper to support the analytical development.     

Poly(cyclohexene oxide)/clay nanocomposites by photoinitiated cationic polymerization via activated monomer mechanism

Poly(cyclohexene oxide) (PCHO)/clay nanocomposites were prepared by in situ photoinitiated activated monomer cationic polymerization. The polymerization of cyclohexene oxide through the interlayer galleries of the clay can provide distribution of the clay layers in the polymer matrix homogenously and results in the formation of PCHO/clay nanocomposites. The exfoliated structures were characterized by X‐ray diffraction spectroscopy, thermogravimetric analysis, transmission electron microscopy, and atomic force microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5328–5335, 2009     

Commuting elements and spaces of homomorphisms

This article records basic topological, as well as homological properties of the space of homomorphisms Hom(π,G) where π is a finitely generated discrete group, and G is a Lie group, possibly non-compact. If π is a free abelian group of rank equal to n, then Hom(π, G) is the space of ordered n–tuples of commuting elements in G. If G = SU(2), a complete calculation of the cohomology of these spaces is given for n = 2, 3. An explicit stable splitting of these spaces is also obtained, as a special case of a more general splitting. Alejandro Adem was partially supported by the NSF and NSERC. Frederick R. Cohen was partially supported by the NSF, grant number 0340575.