Manufacturing,thermal stability,and flammability properties of polypropylene containing new single molecule intumescent flame retardant

Melamine salt of pentaerythritol phosphate kaolin (MPPK) was synthesized by the reaction of pentaerythritol phosphate with kaolin (K) and melamine. The structure of MPPK was confirmed by EDXS, ¹H NMR, FTIR, and XRD. MPPK was blended with polypropylene (PP) at different loading levels. Thermogravimetric analysis (TGA) results showed that MPPK improved the thermal stability of PP at high temperatures in all PP composites. Vertical burning rate test manifested that PP composites can achieve V0 at 20% and 25% MPPK loading levels. Cone calorimeter data exhibited that addition of 25% MPPK to PP reduced peak of heat release rate (pHRR) and total heat release (THR) by 86% and 76% and increased the char residue after test to 67%. The results of PP/25% MPPK composite were compared with the data obtained from PP containing 25% K and 25% of traditional intumescent flame retardant composed of melamine phosphate (MP), pentaerythritol (PE), and K. The outcomes indicated that MPPK was more efficient in flame retardancy than the other systems. The digital photographs and SEM images for char residue demonstrated that MPPK succeeded in forming cellular and coherent char layer on the PP surface. The main advantage of adding 25% MPPK to PP was its ability to preserve nearly the inner half of the sample without burning after cone calorimeter test.     

Enhanced UV photosensing properties of ZnO nanowires prepared by electrodeposition and atomic layer deposition

A new process enabling the synthesis of zinc oxide (ZnO) and Al-doped ZnO nanowires (NWs) for photosensing applications is reported. By combining atomic layer deposition (ALD) for the seed layer preparation and electrodeposition for the NW growth, high-quality ZnO nanomaterials were prepared and tested as ultraviolet (UV) sensors. The obtained NWs are grown as arrays perpendicular to the substrate surface and present diameters between 70 and 130 nm depending on the Al doping, as seen from scanning electron microscopy (SEM) studies. Their hexagonal microstructure has been determined using X-ray diffraction and Raman spectroscopy. An excellent performance in UV sensing has been observed for the ZnO NWs with low Al doping, and a maximal photoresponse current of 11.1 mA has been measured. In addition, initial studies on the stability have shown that the NW photoresponse currents are stable, even after ten UV on/off cycles.     

A nonlinear inequality and application to global asymptotic stability of perturbed systems

The goal of this work is to present a new nonlinear inequality which is used in a study of the Lyapunov uniform stability and uniform asymptotic stability of solutions to time‐varying perturbed differential equations. New sufficient conditions for global uniform asymptotic stability and/or practical stability in terms of Lyapunov‐like functions for nonlinear time‐varying systems is obtained. Our conditions are expressed as relation between the Lyapunov function and the existence of specific function which appear in our analysis through the solution of a scalar differential equation. Moreover, an example in dimensional two is given to illustrate the applicability of the main result. Copyright © 2014 John Wiley & Sons, Ltd.     

Bacteria encapsulation in colloidal inorganic matrices: Is it a general method?

Zirconium oxyhydroxide nanoparticles prepared by an aqueous route were evaluated for Escherichia coli bacteria encapsulation. A low viability rate was measured 24 hours after immobilization that could be attributed to nanoparticle cytotoxicity. Moreover, the presence of glycerol, a long-term cell-preserving molecule, hindered gel formation, probably due to its adsorption on the nanoparticle surface. A comparison with boehmite and ferrihydrite gels previously synthesized following a similar aqueous colloidal route suggests that the generalization of this method will rely on a careful control of the nanoparticle surface reactivity and may require surface chemical modification.     

LIMIT CYCLES TO A FOUR-DIMENSIONAL LINEAR CENTER

In this paper we study a four-dimensional linear center. Based on the averaging theory, we investigate the existence of limit cycles of the system.     

Optical absorption of tetraphenylporphyrin thin films in UV-vis-NIR region

The optical absorption of thermally evaporated tetraphenylporphyrin (TPP) in the UV-vis-NIR region have been studied. The absorption spectra recorded in the UV-vis region for the as deposited and annealed films showed different absorption bands, namely the Soret(B) at region 360-490nm, Q-band region consist of four bands in the region 500-720nm and two other bands labeled N and M in UV region. The Soret band always shows its characteristic effect splitting in all the TPP thin films and the effect of annealing on the intensities of these components have been observed. The spectra of the infrared absorption allow characterization of vibrational modes for the powder, as deposited and annealed thin films. Some of the optical absorption parameters, namely molar extinction coefficient, varepsilon, half band width, Deltalambda, electronic dipole strength, q(2) and oscillator strength, f, of the principle optical transitions have also been evaluated.     

Sur l'existence de solutionsC 1, 1/n,C 1, 1 etC 2, radiales pour des équations de type Monge-Ampère complexe dans la boule unité de ℂ n

Sans résumé     

Magnetic properties of fcc (Co95Fe5)1-xAlx ribbons

Rapidly quenched (Co₉₅Fe₅)_1-xAl_x ribbons are investigated by X‐ray diffraction, magnetization, and Mössbauer effect measurements. A single fcc phase is obtained for all ribbons x ? 10 at.%. The lattice constant increases linearly with x and is discussed in connection with magnetic moment. The influence of Al substitution on both magnetization and Fe‐atom hyperfine field (H) is studied. At 296 K, the magnetization decreases linearly while H drops nonlinearly as x increases. Al substitution leads to substantial differences in iron hyperfine fields in bcc and fcc systems. Fe moment is perturbed differently by Al substitution in fcc (Co₉₅Fe₅)_1-xAl_x and bcc Fe–Al systems.