硅烷基咪唑双三氟甲烷磺酰亚胺离子液体气相色谱固定相的性能评价

以双三氟甲烷磺酰亚胺离子([NTf₂]^-)为阴离子,合成阳离子烷基取代不同(C1、C2和C4)的硅烷基咪唑离子液体,以其为固定相制备气相色谱填充柱。 硅烷基咪唑离子液体为强极性固定相;阳离子结构影响固定相的热稳定性、极性和分离性能。 在这些离子液体固定相中,1-丁基-3-[(3-三甲氧基硅基)-丙基]咪唑双三氟甲烷磺酰亚胺([PBIM]NTf₂)对Grob试剂分离性能较好。 利用溶剂化作用参数模型,评价[PBIM]NTf₂固定相特性,研究固定相-组分分子之间相互作用机制;同时考察[PBIM]NTf₂色谱柱对不同类型化合物的分离性能。 结果表明,[PBIM]NTf₂固定相主要作用力是氢键碱性和偶极作用,对烷烃、醇、酯和胺等不同类型的样品组分表现出良好的分离能力。     

反气相色谱法测定有机溶剂型木质素的溶解度参数

采用反气相色谱法(IGC),于333.15～373.15 K温度范围内测定了有机溶剂型木质素的溶解度参数(δ2)及相关指标。以正辛烷(n-C8)、正癸烷(n-C10)、正十二烷(n-C12)和正十四烷(n-C14)为探针溶剂,计算了探针溶剂的特性保留体积(V0g)、摩尔吸收焓(ΔHs1)、无限稀释摩尔混合焓(ΔH∞1)、摩尔蒸发焓(ΔHv)、无限稀释活度系数(Ω∞1)以及探针溶剂与有机溶剂型木质素的Flory-Huggins相互作用参数(χ∞12)。结果表明,上述4种探针溶剂在测定的温度范围内均为有机溶剂型木质素的不良溶液;在同一温度下,参数χ∞12随着探针溶剂碳数的增加而降低。测得的有机溶剂型木质素的δ2为19.03 (J\5cm-3)1/2。     

1-丁基-3-甲基咪唑甲基磺酸盐水溶液中酚型木质素单体溶解的二维相关红外光谱分析北大核心CSCD

当离子液体(IL)水溶液—1-丁基-3-甲基咪唑甲基磺酸盐([C_(4)C_(1)im]CH_(3)SO_(3))的摩尔分数x_(IL)=0.20时,酚型木质素单体模型化合物2,6-二甲氧基苯酚(2,6-DMP)的溶解度最高。这一现象与木质素溶解规律相似。利用二维相关红外光谱(2D-IR)研究2,6-DMP在[C_(4)C_(1)im]CH_(3)SO_(3)水溶液中溶解过程,以帮助深入理解木质素在IL水溶液中溶解机制。以x_(IL)变量的2D-IR分析结果表明,x_(IL)=0.02~0.20条件下IL加入破坏水的弱氢键结构,IL阴阳离子以水合离子对形式存在,疏水性2,6-DMP与[C_(4)C_(1)im]+和CH_(3)SO_(3)−同时发生相互作用,促进2,6-DMP溶解;x_(IL)=0.20~1.0条件下,IL形成致密离子簇结构,不利于2,6-DMP与IL阴阳离子相互作用。以2,6-DMP摩尔分数(x_(DMP))为变量的分析结果表明,加入2,6-DMP对IL结构影响小,而对水的微观结构影响大。对于具有离子对结构的IL水溶液(x_(IL)=0.10),水优先与CH_(3)SO_(3)−作用;对于具有离子簇结构的IL水溶液(x_(IL)=0.60),水优先形成自缔合小水簇结构。IL水溶液微观结构影响IL-水与2,6-DMP之间相互作用和2,6-DMP溶解特性,同时2,6-DMP溶解也导致IL水溶液的微观结构变化。     

原料对自由落下床中生物质与煤共热解行为的影响

在500～700℃和生物质混合比0～100％(质量分数)条件下,利用自由落下床反应器考察原料对生物质与煤共热解行为的影响.所用煤原料为大雁褐煤(DY)和铁法烟煤(TF),而生物质原料为农业废弃物秸秆(LS)和木材加工余料白松木屑(SD).结果表明,即使在自由落下床中停留时间短的条件下,生物质与煤共热解的协同效应仍然发生...     

1,3-二烷基咪唑离子液体-水二元混合物的溶致显色参数和优先溶剂化行为

Binary mixtures of 1,3-dialkylimidazolium based ionic liquids (ILs) and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solvatochromic indicators at 25℃. Empirical solvatochromic parameters, dipolarity/polarizability (π^*), hydrogen-bond donor acidity (α), hydrogen-bond acceptor basicity (β), and Reichardt''s polarity parameters (E_T^N) were measured from the ultraviolet-visible spectral shifts of 4-nitroaniline, 4-nitroanisole, and Reichardt''s dye. The solvent properties of the IL-water mixtures were found to be influenced by IL type and IL mole fraction (x_IL). All these studied systems showed the non-ideal behavior. The maximum deviation to ideality for the solvatochromic parameters can be obtained in the xIL range from 0.1 to 0.3. For most of the binary mixtures, the π^* values showed the synergistic effects instead of the E_T^N, α and β values. The observed synergy extent was dependent on the studied systems, such as the dye indicator and IL type. A preferential solvation model was utilized to gather information on the molecular interactions in the mixtures. The dye indicator was preferentially solvated on the following trend: IL >IL-water complex >water.     

1-丁基-3-甲基咪唑氯盐-水和2，6-二甲氧基苯酚混合物中分子相互作用的衰减全反射红外光谱研究

Molecular interactions of the ternary mixtures of 1-butyl-3-methylimidazolium chloride ([C₄C₁im]Cl)-water-2,6-dimethoxyphenol (2,6-DMP, a phenolic monomer lignin model compound) were investigated in comparison with the [C₄C₁im]Cl-water binary systems through attenuated total reflection infrared spectroscopy. Results indicated that the microstructures of water and [C₄C₁im]Cl changed with varying mole fraction of [C₄C₁im]Cl (^xIL) from 0.01 to 1.0. This change was mainly attributed to the interactions of [C₄C₁im]Cl-water and the self-aggregation of [C₄C₁im]Cl through hydrogen bonding. The band shifts of C-H on imidazolium ring and the functional groups in 2,6-DMP indicated that the occurrence of intermolecular interactions by different mechanisms (i.e., hydrogen bonding or π-π stacking) resulted in 2,6-DMP dissolution. In the case of ^xIL=0.12, the slightly hydrogen-bonded water was fully destroyed and [C₄C₁im]Cl existed in the form of hydrated ion pairs. Interestingly, the maximum 2,6-DMP solubility (238.5 g/100 g) was achieved in this case. The interactions and microstructures of [C₄C₁im]Cl-water mixtures influenced the dissolution behavior of 2,6-DMP.     

预煅烧对橄榄石生物质气化催化性能的影响

利用小型固定床反应器研究预煅烧对橄榄石生物质气化催化性能的影响.研究发现,经过预煅烧处理的橄榄石具有比原矿更高的催化活性.通过XRD、SEM/EDX和H2-TPR等表征发现,预煅烧使橄榄石的晶体结构发生改变,Fe从橄榄石的镁铁硅酸盐结构中脱出,以α-Fe2O3的形式存在于颗粒表面,而且使其分布比原矿均匀.随着预煅烧温度增高和时间的延长,橄榄石颗粒表面可还原的Fe2O3,数量增加,其催化活性相应提高,说明α-Fe2O3的形成是预煅烧使橄榄石催化活性提高的原因.经过800℃～1 100℃预煅烧会造成橄榄石抗磨损性能下降.综合催化活性和抗磨损能力等因素,900℃下煅烧4 h是比较合理的橄榄石预煅烧处理方法.     

自由落下床中生物质与煤共热解的协同效应对焦油组成的影响

利用溶剂萃取-柱层析方法,将自由落下床中豆秸与大雁褐煤共热解以及单种原料热解的液体产品分为沥青烯、酚类、脂肪烃类、芳香烃类和极性物等组分。结果表明,共热解的沥青烯产率为11.4%,低于根据煤和生物质单独热解的质量加权平均计算值19.0%,且芳香性增大;与计算值相比,低分子量的酚类、甲基苯酚、二甲基苯酚及其衍生物的含量提高了5%;而且长侧链的脂肪烃含量减少。共热解焦油的芳香类组分中十氢萘的质量分数是43.37%,但其在单一原料热解焦油中并没有被检测到。热解油分析结果表明,自由落下床生物质与煤快速共热解过程中存在协同效应,其主要原因是,发生氢解和加氢反应。煤与生物质共热解有利于产生低分子量的化合物,改善油品的质量。