首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  免费   4篇
物理学   4篇
  2013年   1篇
  2012年   2篇
  2011年   1篇
排序方式: 共有4条查询结果,搜索用时 15 毫秒
1
1.
邵茗  郭旭  陈淑芬  范曲立  黄维 《中国物理 B》2012,21(10):108507-108507
In this paper,we report on the fabrication of a top-emitting electrophosphorescent p-i-n white organic lightemitting diode on the basis of a low-reflectivity Sm/Ag semi-transparent cathode together with a thickness-optimized ZnS out-coupling layer.With a 24-nm out-coupling layer,the reflectivity of the cathode is reduced to 8% at 492 nm and the mean reflectivity is 24% in the visible area.By introducing an efficient electron blocking layer tris(1phenylpyrazolato,N,C2 ’)iridium(III)(Ir(ppz) 3) to confine the exciton recombination area,the current efficiency and the colour stability of the device are effectively improved.A white emission with the Ir(ppz) 3 layer exhibits a maximum current efficiency of 9.8 cd/A at 8 V,and the Commission Internationale de L’Eclairage(CIE) chromaticity coordinates are almost constant during a large voltage change of 6 V-11 V.There is almost no viewing angular dependence in the spectrum when the viewing angle is no more than 45,with a CIE x,y coordinate variation of only(±0.0025,±0.0008).Even at a large viewing angle(75),the CIE x,y coordinate change is as small as(±0.0087,±0.0013).  相似文献   
2.
有机发光二极管光取出技术研究进展   总被引:1,自引:0,他引:1       下载免费PDF全文
杨洋  陈淑芬  谢军  陈春燕  邵茗  郭旭  黄维 《物理学报》2011,60(4):836-845
有机发光二极管(OLED)在通信、信息、显示和照明等领域均显现出巨大的商业应用前景,十几年来一直是光电信息领域的研究热点之一.但是,OLED的外量子效率远低于内量子效率,极大程度地制约了其发展和应用.本文主要介绍了多种有效提高器件效率的光取出技术,对微透镜、光子晶体结构、纳米图案和纳米多孔膜以及微腔技术等多种OLED修饰方法进行了回顾和讨论.在此基础上,对一些光取出技术的研究做了展望.  相似文献   
3.
基于ZnS增透膜的顶发射白光有机发光二极管   总被引:2,自引:0,他引:2       下载免费PDF全文
陈淑芬  邵茗  郭旭  钱妍  石乃恩  解令海  杨洋  黄维 《物理学报》2012,61(8):87801-087801
顶发射白光有机发光二极管(TEWOLED)在白光照明和全彩显示中有着良好的应用前景, 克服顶发射器件中的微腔效应是制备光电性能良好的TEWOLED的前提. 使用具有高折射率的ZnS作为增透膜改善金属阴极在蓝光波段的透射率,降低其反射性, 从而有效抑制了微腔的影响.同时利用转移矩阵理论和宽角干涉方法分别对阴极结构和 蓝光发光层位置进行了优化,最终获得了高效、色纯度良好、色度随视角变化小的TEWOLED. 最高亮度和效率分别达到9213 cd/m2和3 cd/A,色坐标位于白光区且接近白光等能点, 同时具有良好的视角稳定性,在0°---60°范围内色坐标仅变化(0.02, 0).  相似文献   
4.
In this paper, an MoOx film is deposited on a polyethylene terephthalate (PET) substrate as a buffer layer to improve the surface roughness of the flexible PET substrate. With an optimized MoOx thickness of 100 nm, the surface roughness of the PET substrate can be reduced to a very small value of 0.273 nm (much less than 0.585 nm of the pure PET). Flexible white top-emitting organic light-emitting diodes (TEOLEDs) with red and blue dual phosphorescent emitting layers are constructed based on a low-reflectivity Sm/Ag semi-transparent cathode. The flexible white emission exhibits the best luminance and current injection characteristics with the 100-nm-thick MoOx buffer layer and this result indicates that a smooth substrate is beneficial to the enhancement of device electrical and electroluminescence performances. However, the white TEOLED with a 50-nm-thick MoOx buffer layer exhibits a maximum current efficiency of 4.64 cd/A and a power efficiency of 1.9 lm/W, slightly higher than those with a 100-nm MoOx buffer layer, which is mainly due to an obvious intensity enhancement but limited current increases in 50-nm MoOx-based white TEOLED. The change amplitudes of the Commission International de l’Eclairage (CIE) chromaticity coordinates are less than (0.016, 0.005) for all devices in a wide luminance range over 100 cd/m2, indicating an excellent color stability in our white flexible TEOLEDs. Additionally, the flexible white TEOLED with an MoOx buffer layer shows excellent flexibility to withstand more than 500 bending times under a curvature radius of approximately 9 mm. Research demonstrates that it is mainly attributed to the high surface energy of the MoOx buffer layer, which is conducible to the improvement of the surface adhesion to the PET substrate and the Ag anode.  相似文献   
1
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号