Suppression of mode competition in fiber lasers by using a saturable absorber and a fiber ring

An erbium-doped fiber (EDF) laser was configured with a fiber grating, a fiber ring resonator, and a saturable absorber by using un-pumped EDF as mode selection element. The laser showed single mode operation with a narrow linewidth of 5 kHz. The mode selection mechanisms of the un-pumped EDF and the ring resonator are theoretically and experimentally analyzed.     

Wideband digitally tunable lasers based on fiber bragg grating external cavity array and 1×N optical switch

A novel wideband digitally tunable laser based on fiber Bragg grating external cavities and 1×N opticalswitch provides 5 ms fast tuning time with output power more than 1 dBm over whole C-band that is onlylimited by the laser emission bandwidth. Less than 50 pm wavelength drift over-10 to 55℃ temperaturerange make that the wavelength locker and monitor are not necessary in this tunable laser.     

5-[4′-正庚基-氧-联苯基-4-氧-羰基]基-1-正戊炔的晶体结构研究

由于共轭聚合物的光致发光和电致发光性能,有望成为制造全塑性发光二极管的材料,因此近年来已引起人们的研究兴趣[1].聚乙炔是一种典型的共轭聚合物,其不稳定性和难加工性限制了它的应用.而含联苯液晶基元的取代聚乙炔,不仅其难加工性得到了改善,提高了稳定性,而且赋予了聚合物液晶性,因此有望开发出一批新型的高性能材料[2].目前对这类新型取代乙炔聚合物及其单体的凝聚态结构的报道还较少.本文通过WAXD,TEM和AFM等手段对小分子液晶5-[4′-正庚基-氧-联苯基-4-氧-羰基]基-1-正戊炔(A3E′O7)的晶体结构进行了研究.1实验部分1.1样品及…     

苯封端还原态苯胺四聚体结晶形态的研究

研究了用溶液滴膜、甘油表面成膜以及溶液旋涂成膜等方法制备的苯封端还原态苯胺四聚体的结晶形态．晶体的晶片厚度、晶体尺寸及结晶完善性均随溶液等温结晶温度的升高而增大．齐聚物在较低过冷度下易于形成尺寸较大的晶体．详细讨论了溶剂及基底与结晶形态的关系．     

石墨烯/有机共轭体系的光热效应与应用

本文对近几年来石墨烯/有机共轭体系在光热效应领域取得的重要研究进展进行了总结评述。虽然有机光热试剂具有优异的光热转换效率和良好的生物相容性,但是,有机光热试剂的光稳定性差,限制了其实际应用。现有研究结果表明,石墨烯可显著地增强有机共轭体系的光稳定性,大幅提高其光热转换效率。此外,石墨烯/有机共轭体系还可集多种功能于一体,例如:光声成像指导下的光热治疗、pH响应的荧光成像和光热治疗、光热和光动力联合治疗等,这对有机共轭体系在光热治疗领域的应用具有重要意义。本文总结的研究结果及所作的分析,希望对新型有机共轭体系的光热效应及后续研究起到一定的参考和促进作用。     

铝槽封装光纤光栅传感器的增敏特性研究

提出了一种光纤布喇格光栅的铝槽封装工艺,并对铝槽封装光纤光栅传感器的应变与温度传感特性进行了实验研究和理论分析.与裸光纤光栅的测试结果比较表明,铝槽封装工艺基本不改变光纤光栅应变传感的灵敏性,但是温度灵敏度系数提高了3.5倍.经过该工艺封装的光纤光栅可以探测识别0.2 με的应变与0.02℃的温度变化.     

Fabrication of polythiophene patterns through blending of a thermally curable polythiophene with poly(methyl methacrylate) and selective thermal curation

In this study, we demonstrate a novel method for fabricating polythiophene patterns, i.e., cylindrical holes and cylinders, through blending of a thermally curable polythiophene carrying with tertiary ester groups (PT-tert-ESTER) and poly(methyl methacrylate) (PMMA), followed by thermal conversion of the PT-tert-ESTER to an insoluble polythiophene via low-temperature cleavage of the tertiary ester groups and removal of the PMMA component via ultraviolet degradation. We show that the surface polarity of substrates, the mass ratio of PT-tert-ESTER to PMMA in the blend solutions as well as the concentration of the blend solutions strongly influence the formation of the polythiophene patterns. Cylindrical holes are more readily formed on less polar substrates when a PT-tert-ESTER dominated blend solution is used, while cylinders are more readily formed on more polar substrates when a PMMA dominated blend solution is used. Moreover, the diameters of both the cylindrical holes and the cylinders decrease as the PT-tert-ESTER concentration is increased in the respective ranges of the PT-tert-ESTER/PMMA ratios where the patterns are formed. Grazing incident X-ray diffraction data have indicated that the patterning of the PT-tert-ESTER component in the blend films improves the crystallinity of PT-tert-ESTER as well as the molecular packing of the insoluble polythiophene in the resultant patterned polythiophene films.     

5-[4'-正庚基-氧-联苯基-4-氧-羰基]基-1-正戊炔的晶体结构研究

由于共轭聚合物的光致发光和电致发光性能, 有望成为制造全塑性发光二极管的材料, 因此近年来已引起人们的研究兴趣[1]. 聚乙炔是一种典型的共轭聚合物, 其不稳定性和难加工性限制了它的应用. 而含联苯液晶基元的取代聚乙炔, 不仅其难加工性得到了改善, 提高了稳定性, 而且赋予了聚合物液晶性, 因此有望开发出一批新型的高性能材料[2]. 目前对这类新型取代乙炔聚合物及其单体的凝聚态结构的报道还较少. 本文通过WAXD, TEM和AFM等手段对小分子液晶5-[4′-正庚基-氧-联苯基-4-氧-羰基]基-1-正戊炔(A3E′O7)的晶体结构进行了研究.     

石墨烯/壳聚糖电化学传感器对色氨酸对映体的选择性识别

本文设计合成了一种石墨烯/壳聚糖复合物薄膜,并将其作为电化学电极应用于选择性检测具有旋光活性的色氨酸(Trp)对映体。采用X射线衍射、红外光谱、拉曼光谱、X射线光电子能谱、透射和扫描电子显微镜表征了石墨烯/壳聚糖复合物的结构。以石墨烯/壳聚糖复合物为电极,通过示差脉冲伏安法实现了Trp对映异构体的识别,结果表明L-Trp比D-Trp具有更高的电化学响应,并且峰电流密度和Trp的浓度在0.3×10-4~1.5×10-4 mol·L-1范围内有线性关系。该复合物电极具有厚度和面积可控、稳定性高等优点,可显著提高电化学检测中的电流信号,有望用于分子药物及临床医学领域中手性对映体的识别。     

Single-frequency phosphate glass fiber laser with 100-mW output power at 1535 nm and its polarization characteristics

We demonstrate a high power single-frequency fiber laser. By using phosphate glass fiber as its gain media, the laser can achieve high output power of 100 mW in centimeter-long linear cavity. Single-frequency singlepolarization operation with 〈5 kHz linewidth and 65-dB signal-to-noise ratio （SNR） is realized by using external cavity polarization feedback technology.